Generac Power Systems 004709-0 owner manual Installation Checklist

3.5 INSTALLATION CHECKLIST

‹EXHAUST SYSTEM

❑Generator is properly restrained.

‹GENERATOR COMPARTMENT

❑Compartment construction is proper.

❑Holes/Openings are vapor-sealed.

❑Compartment size is correct.

❑Compartment is vapor-sealed.

❑Sound insulation is correct.

❑Floor cutouts are properly completed.

‹COOLING AND VENTILATING AIR

❑Airflow is adequate.

❑Air inlet opening is correct.

❑Compensate for restrictions.

❑Check that installation has been tested.

‹GASOLINE FUEL SYSTEM

❑Fuel tank complies with all applicable codes.

❑Fuel system is properly installed and checked for leaks.

‹OPTIONAL LP GAS FUEL SYSTEM

❑Fuel system is properly installed and checked for leaks.

❑Pressure at regulator inlet is correct.

❑Rated flow of primary regulator is correct.

❑All parts are properly installed.

❑Fuel system is properly tested/adjusted.

‹ELECTRICAL CONNECTIONS

❑Connections comply with local code requirements and all National Electrical Codes.

❑Junction box is properly installed.

❑Wiring meets all standards.

❑All connections are correct.

❑Conduit is properly installed and sealed.

❑Generator is properly bonded to the vehicle.

‹BATTERY INSTALLATION

❑Recommended battery is installed.

❑Recommended cables are installed.

❑Cables are clean and tight.

❑Cables are connected properly.

❑Proper ventilation is provided.

❑Terminals are coated with anti-corrosion grease, and terminal covers are positioned.

‹OPTIONAL ACCESSORIES

❑Check that remote start/stop panels (if used) are installed properly.

❑Check that hourmeter kit (if used) is installed properly.

❑Check that any other options and accessories (if used) are installed properly.

‹POST INSTALLATION TESTS

❑Check that all tests are completed properly.