Controls and Connections
1 2
SOLID STATE RECORDER PMD670
TRACK JUMP | FWD / + | |
REC |
|
|
UNDO |
|
|
MARGIN RESET | PLAY / PAUSE | STOP |
POWER
I / O | MENU/STORE | ENTER | CANCEL |
34
Top
1.Speaker
The played back audio signal is simulta- neously output to the
2. MIC (internal microphone)
POWER | 3. POWER switch |
| |
| Slide to the right and release |
| to turn Power on or off. |
| If the AC adaptor is con- |
nected at DC IN and plugged in, it powers the PMD670.
If power is not detected at DC IN, battery power is automatically used if available.
When first powered up the PMD670 takes some time to initialize.
4. Security cover
Use a small Phillips screw- driver to remove or replace the Security cover.
The Security cover makes setup controls relatively unavailable. The setup
controls allow you to setup the PMD670 for your unique application. You can then have someone operate the PMD670 without concern that they might change something that could cause failure to record.
Note: Two 3mm machine screws 10mm long are used for the security cover.
Recording setup controls
OFF | ON | STEREO | 0dB | ||
L | R | ||||
5 |
|
|
|
|
|
AUTO MARK | ANALOG OUT | MIC ATTEN | |||
OFF | ON | SINGLE |
| FLAT | |
OFF | ALL |
|
| ||
PRE REC |
|
|
| ANC | |
|
|
|
| LIMITER | |
OFF | ON | OFF | ON | ALC | MANUAL |
INPUT LOCK | EDL PLAY | LEVEL CONT. | |||
|
|
|
| EDIT |
|
INPUT |
| MARK |
| ||
OFF ON | 5. | AUTO MARK switch | |||
| |||||
|
| Turns the automatic EDL | |||
AUTO MARK |
| mark feature on or off. |
ON: During record, a pause (pushing the REC PAUSE button) adds an EDL mark to the track. During record an EDL mark is added to the track if a remote device (plugged into the REMOTE jack) is used to pause recording.
OFF: Pausing during record does not add an EDL mark to the track.
Factory default: AUTO MARK switch ON.
Loading is dis- played, then a blank screen for a while.
Reading is dis- played while the CF card is read.
L
R
L
R
- 14 -