TOTAL TRACKTIME | L |
|
|
|
|
|
|
|
REC REMAIN kbps |
|
|
|
|
|
|
| |
40 | 20 | 12 | 6 | 2 | 0 | over | ||
AM | R |
|
|
|
|
|
|
|
PM |
|
|
|
|
| S.SKIP |
| |
| INT |
|
|
|
|
| ||
TRACK |
|
|
|
|
|
|
| |
MIC |
|
|
|
|
|
|
| |
MARK | LINE |
|
|
|
|
|
|
|
18 | 19 | 20 21 22 23 24 | 25 | 26 |
Mark number, number of EDL Marks on CF card etc. Associated labels are display items 15 and 16.
18.MIC/INT MIC label
The MIC label appears when external micro- phones are selected.
The INT MIC label appears when input se- lected for recording is the internal micro- phone.
19.LINE label
The LINE label appears when input(s) se- lected for recording is (are) the LINE IN jacks.
20.Record 
The Record symbol appears when the PMD670 is in record mode. Appears with the Play symbol when recording. Appears flashing when in record pause.
21.Play 
The Play symbol appears when the PMD670 is in playback, playback pause, recording, record pause.
22.Pause 
The Pause symbol appears when the PMD670 is in playback pause, or record pause.
23.Battery 
The Battery symbol appears in most displays to indicate battery charge.
indicates that battery charge is okay.
indicates that battery charge is getting low and there is approximately 5 to 10 minutes of record or playback time available.
flashing indicates that battery has ap-
proximately 1 to 3 minutes of record or playback time remaining.
The REC indicator light will flash. If BEEP is set to On the PMD670 will also beep.
If the PMD670 continues to operate it will automatically shut down. If recording it will write track information, stop recording and power off. If in playback it will stop playback and power off.
indicates that battery charge is depleted or no battery is installed.
24.S.SKIP label
The Silent Skip label appears when Silent Skip is enabled.
25.Margin level
The Margin level is displayed. The PMD670 holds this display at the highest level achieved during the current recording. If more than 0 dB, OV is displayed. To reset the Margin level press and release the MARGIN RESET button.
26.-dB label
The -dB label applies to the Peak level display.
Care and Maintenance
Use a soft cloth slightly moistened with mild detergent solution.
- 48 -