OFF | ON | STEREO | 0dB | ||
L | R | ||||
AUTO MARK | ANALOG OUT | MIC ATTEN | |||
OFF | ON | SINGLE |
| FLAT | |
OFF | ALL |
|
| ||
PRE REC |
|
|
| ANC | |
|
|
|
| LIMITER | |
OFF | ON | OFF | ON | ALC | MANUAL |
INPUT LOCK | EDL PLAY | LEVEL CONT. | |||
|
|
|
| EDIT |
|
INPUT |
| MARK |
|
16 17 18
EDIT
Edit functions: editing EDL Marks to create custom playback sequences, erasing and renum- bering Tracks, and formatting the CF card.
Custom playback sequences
EDL Marks are numbered consecutively from 001 and automatically renumbered when an EDL Mark is added or erased. Playback is also con- secutive from the point that playback begins.
MARK
16, 17, 18. MARK/ EDIT buttons
This button group
EDL Mark custom playback can:
controls EDL Marks and Editing functions.
EDL Marks
Mark functions: manually adding Marks, and locating Marks.
Adding EDL Marks
Press and release the MARK/ EDIT button to manually add an EDL Mark during recording.
Press the MARK/ EDIT button during pause, recording, or playback to add an EDL Mark. During recording adding an EDL Mark introduces an audible click in the recording when using the internal microphone.
Locating EDL Marks
From Stop press and release the Mark forward button (18) or Mark reverse button (16) to tab through the EDL marks on the CF card.
EDL Mark location as recording time from the beginning of the track.
Example display.
TRACKTIME
L
R
MARK dis- | MARK |
played (instead |
|
|
of TRACK) | EDL Mark | EDL Mark type |
| ||
| number | |
|
|
To start playback from the displayed EDL Mark press and release the PLAY/PAUSE button.
Skip playback from the beginning of a 'Skip' EDL Mark to the beginning of the next EDL Mark.
Note: EDL Marks are not automatically placed at the beginning of tracks. If you want your custom playback sequence to include track beginning points add EDL Marks to coincide with track beginning points by:
a.Start playback by pressing and releasing PLAY/Pause and then pause playback by pressing and releasing PLAY/Pause again.
b.Press and release TRACK JUMP forward or TRACK JUMP reverse until the desired track number is displayed.
c.Press and release the MARK/ EDIT button.
Editing EDL Marks:
All EDL Marks are initially entered as 'Point' marks.
From Stop display the EDL Mark by pressing and releasing the Mark forward button (18) or Mark reverse button (16) to tab through the EDL marks on the CF card.
When the EDL mark to be edited is displayed press and release the MARK/ EDIT button. The current EDL Mark type will be flashing.
Example display.
19 | - |
19 | - |
- 19 - 19 | - |
19 | - |
19 |
|
TRACKTIME |
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
00 | 40 | 20 | 12 | 6 | 2 | 0 over | |
R |
|
|
|
|
|
|
MARK