Marantz PMD670 manual Skip, Edit mode, How to renumber tracks, EDL A-B looping, Erase

Page 20

Press and release the MARK/ EDIT button to tab through the EDL Mark types: Point, Skip, Loop_A, Loop_B, and Erase. When the type you want to change the EDL Mark to is flashing press and release the ENTER button .

TRACKTIME

L

-dB00402012620 over

R

-dB

MARK

Writing will be displayed briefly and the PMD670 will return to stop mode.

Skip

An EDL Mark changed to 'Skip' will be skipped during EDL playback (playback with EDL PLAY switch at ON). Playback will skip to the beginning of the next EDL Mark.

A skipped EDL recording is not erased. The recording is still on the CF card. The skipped EDL recording will play if the EDL PLAY switch is at OFF. You can change the type later.

Edit mode

Edit mode includes: Renumber (renumber tracks), TrkERASE (erase a track), TrkMkERASE (erase an EDL mark), AllMkERASE (erase all EDL marks), and FOR- MAT (format the CF card).

How to renumber tracks

If you have erased tracks from the CF card it is easier to locate recordings if the tracks are renumbered.

From stop press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber flash- ing in the display.

While Renumber is flashing (5 seconds) press and release the ENTER button . (Or press and release the STOP button to cancel.)

EDL A-B looping

To playback an EDL A-B loop press the PLAY/ PAUSE button to begin playback then press and release the A-B REPEAT button.

If there is an error, for example there is an EDL Mark of type Loop_A but no EDL Mark of type Loop_B an error message is displayed.

 

TRACK TIME

 

 

 

 

 

 

 

Example

L

 

 

 

 

 

 

 

-dB0040

201262

0 over

 

R

 

 

 

 

 

display.

 

 

 

 

 

 

 

-dB

TRACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only one EDL A-B loop can programmed. When a 'Loop_A' or 'Loop_B' exists on a CF card and another is created the old mark automatically changes to a 'Skip'.

Erase

When an EDL mark is erased the remaining EDL marks are automatically renumbered from 1 through the number of EDL marks on the CF card.

EXECUTING will be displayed and the percent- age executing will increase to 100%.

100% done will be displayed momentarily. Then the PMD670 and the display will return to stop mode.

How to erase tracks

From stop press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber flashing in the display.

While Renumber is flashing (5 seconds) press and release the MARK/ EDIT button again.

TrkERASE flashing in the display.

While TrkERASE is flashing (5 seconds) press and release the ENTER button .

- 20 -

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model PMD670 User Guide Risk of Electric Shock Important Safety Instructions Copyright CE marking only EU version English Quick Start What the Input selections do Table of ContentsRecording setup controls How to connect via I/O port Right side Installing the carry strap BottomPackage contents Left sideControl and Connection Diagrams Top Setup controlsMIC internal microphone MARK/ Edit controlsBottom Battery compartment Control FrontControl Display Security Input settings IntroductionAudio inputs may be from Audio outputs may be fromFeatures TracksAutomatic recording EDL marksPower switch Auto Mark switchMark feature on or off Controls and ConnectionsAnalog OUT switch 0dB -20dB9. MIC Atten switchSelects the audio output Channel for playbackRepeat switch ANC switchEDL Play switch Level CONT. switchSwitch a to on Input buttonDisplay Mono With INT MICInput devices and channels Mono with INT MIC input Stereo with Line inputMono with Line input LR mono with Line inputCustom playback sequences 16, 17, 18. MARK/ Edit buttonsAdding EDL Marks Locating EDL MarksEdit mode How to renumber tracksHow to erase tracks SkipHow to erase all EDL marks within one track How to erase all EDL marks How to format a CF cardBlankCard will be DisplayedControls and Connections Top 19, 20. TrackJump buttons Track Jump reverse buttonMargin RESET/ I/0 MENU/STORE button Margin Reset buttonIng the Margin Reset button MENU/STORE buttonMenu choices are Page How to set or change the Date Form Chart of Algorithm/File Parameters Algor/FileRecording Type AlgorithmHow to set or change the Algor/File parameter defaults How to set or change the Algor/File param- eters Other menu choices Manual track incrementing Seamless PlaySilent Skip Auto Cue Single Play BeepAutomatic Power Off Battery TypeRemote Mode Broadcast Wave ID numbersMenu Default PLAY/PAUSE button Enter buttonREC 4. REC indicator REC switchREC Level controls Turn to adjust See Display onDefault display Display buttonAfter the third Press file paKEY Lock switch Charge 11. Charge indicatorCF card compartment Card eject button15. I/O port SecurityDigital IN/OUT jacks How to connect via the I/O port Jacks Line OUT jacksRemote jack RemoteModeInstalling the carry strap Installing an optional Ni-Cd or Ni-MH battery Battery powerInstalling AA size batteries REC label Total labelTrack label Remain labelBattery MIC/INT MIC labelLine label RecordMp3 Troubleshooting Specifications Limited Warranty Marantz is a registered trademark 2003/6
Top Page Image Contents