Marantz PMD670 manual Security, Digital IN/OUT jacks, 15. I/O port

(3mm x 10mm long)

Security

The supplied Memory compart- ment security screw requires using a small Phillips screwdriver to open the Memory compartment

door. That reduces the possibility that the CF card will be misplaced or stolen.

d

c

1.Remove the plastic pin (c) and then the retainer (d).

2.Add the screw. Tighten the screw with a small Phillips screwdriver tight enough so the screw cannot be removed with a fingernail.

IN: Connect to the digital out of a digital audio component. PCM audio data input at 44.1 and 48 kHz can be recorded.

This input has to be selected in the Input menu for the signal to be recorded. See INPUT button.

OUT: Connect to the digital in of a digital audio component.

•Only files with sample frequencies of 48 or 44.1kHz can be output.

•Digital audio is only output during normal or EDL playback.

•The receiving component must be able to accept audio in SPDIF (IEC-958-II) format.

•The receiving component must be able to accept a sampling frequency of 48 or 44.1kHz.

DC IN 13V

14.DC IN 13V jack Plug the supplied AC

adapter in here. The power supplied is 1.0A at 13V AC. The PMD670 automatically switches to adapter power

if it was running on battery power. If AC power is interrupted by a power outage or unplugging the adapter the PMD670 automatically switches to battery power.

Left side continued

	13
CHARGE	DIGITAL
DC IN 13V	IN
	I/O
	OUT

14 15

DIGITAL	13. DIGITAL IN/OUT jacks
IN	RCA jacks for connect-
	ing the PMD670 to an
	audio component that
OUT	accepts or outputs digital
	audio signals.

I/O	15. I/O port
	Plug the supplied I/O cable in
	here and connect the other end
	to your computer (PC or MAC).

The connection makes it easy to copy audio files to your computer's hard drive or a CD. The I/O connection can only be made active when the PMD670 is off (neither recording or during play- back).

- 42 -