Marantz PMD670 manual Quick Start

Quick Start

2. Slide the POWER switch to the right and release.

Follow the instructions on this page to Quick Start your new PMD670 Portable Solid State Recorder and begin recording.

Note: Outside of the USA a CF card is not included. See page 41 for installing a CF card and page 22 to format a CF card.

Quick Start Basic Instructions

STOP

POWER

On first power up, wait for the PMD670 to initialize.

A full display will appear momentarily.

TOTAL TRACK TIME A-B	L
REC REMAIN kbps
kHz-dB 00		40	20	12	6	2	0	over
AM	R
PM						S.SKIP		-dB
	INT
TRACK
	MIC
MARK	LINE

DC IN 13V

f.

CANCEL

a.

REC

POWER	d.
b.	REC PAUSE

c. e.

The display will change to Loading then to Reading.

The display will change to this display for a newly formatted CF card.

L

-dB00402012620 over

R

							-dB
L
-dB	00	40	20	12	6	2	0 over
R

-dB

INT

MIC

a. Plug the AC adapter in.

3. Slide the REC button to the right and release. Recording begins.

b. Slide the POWER switch to turn on.

c. Slide the REC switch to start recording.

d. Push and release REC PAUSE when record-

a

REC

	ing is not necessary.
e.	Slide the REC switch to resume recording.
f.	Push the STOP button to stop recording.

Quick Start Detailed Instructions

The PMD670 comes factory preset for recording voice using its built-in (internal) microphone. These are

The Rec indicator (a) will be lit and steady while recording.

c

The display will show the recording time (b) of the current track (c).

b

TRACKTIME	L
	-dB	00	40	20	12	6	2	0 over
	R
		INT						-dB
TRACK		MIC

settings for recording a meeting, not settings for recording a vocal performance. Quick Start ignores your changing any of these presets, it even ignores installing batteries.

1. Unpack the AC adapter and the PMD670.

a. Plug AC adapter into

household power.

DC IN 13V

b.Plug the adaptor jack into the PMD670 at DC IN 13V.

4.Push and release the STOP button to stop record- ing and end the track (close the audio file).

STOP

The display will
			TIME	L
show the remaining			REC REMAIN
				R
				-dB0040		201262	0 over
recording time at							-dB
					MIC
					INT
current settings for
the CF		example shows 4 hours 21 minutes and 02 seconds
card.		remaining
	To transfer audio files to your computer:
	transfer the CF card, see page 37,
	or
	connect via I/O, see page 43.

- 6 -