Atria™
Attaching the Canopy
4 To install the canopy hardware, set aside the canopy hatch and one canopy hatch screw and lock washer. You will install the canopy hatch in the next section. Attach the canopy to the crossbar mounting bracket with three of the canopy screws and lock washers. Using the screwdriver provided, tighten each screw until the canopy hardware is mounted firmly to the crossbar mounting bracket.
NOTE: On a sloped ceiling, align the canopy opening with the top or peak of the room.
Step 5
Canopy
| Lock washers (3) |
Canopy hatch |
|
Canopy screws (3) | NO DRILL |
|
10