![](/images/new-backgrounds/1112736/1127363x1.webp)
Atria™
PLEASE INSPECT ALL PACKAGING PRIOR TO DISCARDING!
Your Casablanca fan was crafted with pride and care and inspected thoroughly prior to shipment. Before you begin to assemble and install your fan, remove all parts from the carton and check them against the Parts Guide in this manual.
Make sure all parts are included in the box using the Parts Guide on the following pages.
If there are missing or broken parts:
•Call
Proper Parts Handling
•Do not remove lightbulbs from their packaging until you are ready to install them.
•Before discarding packaging materials, be certain that all parts have been removed.
•Use a clean, dry paintbrush to remove small Styrofoam pieces that may remain after unpacking.
•Do not brush Styrofoam into wiring cavities.
•The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, do not mix blades from different cartons.
•When cleaning, painting, or working near your fan, be cautious of the fan and blades.
•Always turn power to the ceiling fan OFF before replacing lightbulbs or working on your fan.
•Never insert anything into the path of the fan blades while the fan is in operation.
•Never install a fan over a pool or spa.
•Never operate a fan that has been damaged in any way.
Install the fan according to the instructions in this manual.
If the fan does not work:
•Refer to the Troubleshooting Tips in this Owner’s Manual
•Call Technical Support at
•Contact your local Authorized Service Center
Our Web site at www.casablancafanco.com contains additional information on Casablanca products, troubleshooting, and Authorized Dealer or Service Centers. Please do not return this product to the store.
RECORD MODEL AND SERIAL NUMBERS BEFORE INSTALLATION!
Please take a moment to locate the model number and serial number from your fan (see below) and record this information on the Warranty page inside the front cover of this Owner’s Manual if it does not appear there already. These numbers are found on the motor identification plate affixed to the fan motor in the following location as shown below:
Atria® |
|
TYPE | HANGER TYPE |
POMONA, CA DJ01 1151 | MODEL #C18G500F |
Motor Identification Plate
SERIAL No.: DJ06 2237 Serial Number
C18G500F Model Number
2