Atria™
3 Assemble the blade irons, blades, and blade iron plates. Place the blade iron on top of the blade and the blade iron plate underneath the blade. Use a manual screwdriver and the blade iron plate screws to secure the blade assembly. Use four screws per blade. Repeat this process for each fan blade.
ÑÑCAUTION: Do not use an electric screwdriver to assemble fan blades!
Step 3
Fan blade assembly
Blade irons (5)
NO DRILL
Blades (5)
Blade iron plate screws (4)
Attaching
4 Install the assembled blades to the blade iron support ring using 10 blade iron screws (use two screws for each blade assembly). Align the screw holes on the blade irons with the screw holes on the blade iron support ring. Tighten the screws with a manual screwdriver.
ÑÑCAUTION: Do not operate the fan at this point. Installation must be completed before turning on the fan.
Step 4
Blade iron
Blade iron | Blade iron |
support ring | screws (2) |
Installed blade assemblies |
|
18