![](/images/new-backgrounds/1112736/11273627x1.webp)
Atria™
Installing the W-81 Wall Control
Hardware (not to scale)
Wall Plate (2 colors included) | Wall Control (1) | Wire Nuts (4) | ||
(assembled) | ||||
|
|
|
Wall Plate | Switch Box |
Screws (4) | Screws (2) |
|
|
The
ÑÑCAUTION: Ensure power is turned OFF at the breaker or fuse panel before beginning wall control installation.
NOTE: The
1 Remove the screws and switch plate from the existing wall switch box, and pull the switch away from the box to expose the wire connections.
2 Disconnect the three wires from the existing switch and remove the switch from the wall box. The ends of the wires in the wall box may need to be stripped before installing the new control.
NOTE: The wire nuts provided are only suitable for use with copper wire. Use wire nuts to join one
14