Bush Hog 2047, 1947 manual Standard Equipment and Specifications

OPERATION

1.Standard Equipment and Specifications

Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 48” bucket, external hydraulic system of 4.75 GPM with engine operating at 2800 RPM and relief setting of 2000 PSI.

		1947	2047
Horsepower Range		10-20 HP	10-20 HP
System pressure/flow rate		2000 PSI/ 5 GPM	2000 PSI/ 5 GPM
Lift Capacity to maximum height		550 lbs.	570 lbs.
Breakout force at pivot pin		1711 lbs.	1472 lbs.
Rollback force at ground line		1074 lbs.	902 lbs.
Total weight with bucket (approx.)		662 lbs.	662 lbs.
Raising time to full height		3.4 sec.	3.4 sec.
Lower time		2.2 sec.	2.2 sec.
Attachment dump time		3.3 sec.	3.3 sec.
Attachment rollback time		3.1 sec.	3.1 sec.
Hydraulic system flow		5 GPM	5 GPM
System pressure at rated flow		2000 PSI	2000 PSI
Lift Cylinders number and type		two, 1-1/2 Dia. D/A	two, 1-1/2 Dia. D/A
Dump Cylinders number and type		two, 1-1/2 Dia. D/A	two, 1-1/2 Dia. D/A
A.	Maximum Lift Height at Pivot Pin	76”	77”
B.	Maximum Height Under Bucket	71”	71”
C.	Clearance with Bucket Dumped	57”	57”
D.	Reach at Maximum Height	22”	22”
E.	Maximum Dump Angle	44°	43°
F.	Reach with Attachment on Ground	53”	54”
G.	Attachment Rollback Angle	22°	21°
H.	Digging Depth	4”	4”
I.	Overall Height in Carry Position	47”	48”

(Manufacturers estimated specifications and design subject to change without notice.)

1947/2047 01/11 Operation Section 4-3

© 2011 Alamo Group Inc.

OPERATION