Black & Decker NPP2018 Joining Saw Head Module to 18V Handle Module, Are visible

Page 10

Assembly

 

Joining Saw Head Module to 18V Handle Module

WARNING: Sharp moving blade. To prevent accidental

operation, insure that battery is disconnected from the handle

and that the protective scabbard is in place on the chain before

performing the following operations. Failure to do this could result

in serious personal injury.

 

The three modules which make up the 18V Pole Saw are keyed to

insure correct assembly. If a module does not smoothly attach to

another do not force fit.

 

Combining the handle module (A) to the saw head module (C)

creates a pole saw that is approximately 6 foot in length as shown in

figure 9. 9

 

Toattach the handle module to the saw head module:

1. Align the groove on the outside of the coupling end of the handle

module (A) with the tongue on the

10

inside of the coupling end of the saw

 

head module (C). See figure 10. Push

 

the two sections completely together.

Groove

2. Slide the threaded sleeve (6) figure 11

on the saw head module down as far as

 

possible and rotate the sleeve clockwise

11

until it stops and completely covers the

 

orange threads as shown in figure 12.

 

WARNING: Always check to make

 

sure that the sleeve is completely

 

threaded on and that the orange

 

threads are no longer visible. Not

12

threading the sleeve completely on

 

could result in the modules becoming

 

disconnected creating a hazardous

 

condition. Periodically check the

 

connections to insure that no orange

 

threads are visible.

 

Joining Center Extension to Saw Head Module and Handle Module

Adding the extension (B) to the handle module (A) and saw head module (C) creates a Pole Saw that is approximately 9 foot in length as shown in figure 13.

13

 

To attach the middle module to the handle module and saw head

module:

14

1. Align the groove on the outside of the

 

coupling end of the handle module (A)

 

with the tongue on the inside of the

 

coupling end of the center extension (B). Groove

See figure 14. Push the two sections

 

completely together.

15

2. Slide the threaded sleeve (6) (figure

 

15) on the center extension down as far

 

as possible and rotate the sleeve

 

clockwise until it stops and completely

 

covers the orange threads as shown in

 

figure 16.

16

3. Repeat steps 1 and 2 above to attach

 

the saw head module to the center

 

extension.

 

WARNING: Always check to make

 

sure that the sleeve is completely

 

threaded on and that the orange threads are no longer visible.

Not threading the sleeve completely on could result in the modules

becoming disconnected creating a hazardous condition.

Periodically check the connections to insure that no orange threads

are visible.

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Cordless Pole Saw Do not operate Pole Saw General Safety Rules Pinch or fall into chainTo filter out microscopic particles Kickback Safety FeaturesSkinand mayw terpromote. absorption of harmful chemicals Battery in charger or tool Battery Cap Inform TionCharging Nameplate Rating Amps 0 Chart for Minimum Wire Size Awgof Extension CordsGenerator or DC power source. Use only 120V AC Outlet. Note Do not charge by means of an engineLeaving the Battery Pack in the Charger Storage RecommendationAnd/or serious personal injury Installing and Removing Saw ChainSlot is located over the adjustment Pin Could result in serious personal injuryChain Oiling Adjusting Chain TensionChain with graphic on housing shown here Transporting Pole SawSlide the threaded sleeve 6 figure Joining Saw Head Module to 18V Handle ModuleToattach the handle module to the saw head module Becoming disconnected creating a hazardous conditionDetaching Saw Head Module Connecting the BatterySwitch Auto-Stop Chain Braking SystemPruning With the Pole Saw Problem Possible Cause Possible Solution AccessoriesTroubleshooting Section Saw chain sharpnessPossible Cause Possible Solution Troubleshooting Section Con’tProblem See ʻTools-ElectricʼScie à long manche sans fil Consignes DE Securite Importantes Pendant lʼutilisation de la scie à long mancheDispositif de protection contre les rebonds EntretienNe pas utiliser la scie à long manche Règles de sécurité GénéralitésTenir lʼoutil par les surfaces isolées prévues à cet effet En contact avec des fils électriques cachés ou son propreAvertissement risque d’incendie. Ne pas ranger ni ne Pile Lutilisation dun accessoire non recommandé ni vendu parLa sûreté et au fonctionnement Mise EN Garde Afin de minimiser les risques de120 V, 60 Hz. Remarque Ne chargez pas la batterie au Le chargeur est conçu pour être branché dans une priseRésidentielle standard de 120 volts et de 60 Hz Moyen dun alternateur ou dune source dalimentation c.cRanger loutil Recommandations DʼENTREPOSAGEGlossaire terminologique de la scie à long manche Ensemble DE Piles Dans LE ChargeurCaractéristiques Installation et retrait de la chaîne coupanteUtilisation Assemblage Graissage de la chaîneRéglage de la tension de la chaîne Assemblage du module de tête deDémontage Pour détacher le module de tête de scie Assemblage du module central avec le module deTête de scie et le module de poignée Pour prévenir tout accident, sʼassurer quela pile est bienInterrupteur Utilisation de la scie à long mancheBranchement de la pile Système de freinage dʼarrêt automatiqueÉbranchage avec la scie à long manche Affûtage de la chaîne coupante AccessoiresGuide de dép nnage Entretien de la scie à long mancheProblème Cause probable Solution possible Manual DE Instrucciones Reglas Importantes DE Seguridad Al operar la garrocha podadoraProtector contra rebote No opere la garrocha podadoraServicio PrecaucionesNormas específicas de seguridad Piel expuestas con agua y jabón. Si permite que el polvo se Información sobre el protector de la bateríaSerruchado, pulido y taladrado mecánico y otras actividades Advertencia La utilización de esta herramienta puedeTabla DE Medidas Minimas DE Conductor AWG Para Amperios Segun Placa 0 aCarga DE AL Menos 9 Horas Antes DE SU USO Paquete DE Bateríasno Vienen CompletamenteCargadas DE FÁBRICA. Paquete DE Baterías DE Recomendacion Para EL AlmacenamientoDejando LA Batería EN EL Cargador Nombres y terminología para la garrocha podadoraBarra guía de rebote reducido Una barra guía que se ha Instalación y desmantelamiento de la cadena de la CaracterísticasSierra Aceitado de la cadena Ajuste de la tensión de la cadenaTransporte de la garrocha podadora Advertencia Siempre revise Con el saliente de la parte interna delLo más que pueda y enrosque el 40 módulos para verificar que no se vean hilos naranjosConexión de la batería Desmantelamiento Separación del módulo de la sierraOperación de la garrocha Podadora ConmutadorPara podar con la garrocha podadora Poda con laAdvertencia Tensión de la cadena de la sierra AccesoriosCausa posible Posible solución Problema Sección de resolución de problemasProblema Causa posible Posible solución Epecificaciones NPP2018 Page Product Infomation · Identificacion DEL Producto Form No June Cat No. NPP2018 Copyright 2011 Black & Decker
Related manuals
Manual 44 pages 39.07 Kb

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents