Black & Decker NPP2018 Accessories, Troubleshooting Section, Saw chain sharpness

Page 13

If you try to cut off thick branches from the bottom, the branch may close in and pinch the saw chain 24 in the cut. If you try to cut off thick branches from the top, without a shallow undercut, the branch may splinter figure 24.

Do not force Pole Saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

3. Remove Pole Saw from cut while

it is running at full speed. Stop Pole Saw by releasing trigger. Make sure chain has stopped before setting Pole Saw down.

Saw chain sharpness

The cutters will dull immediately if they touch the ground or a nail while cutting.

Saw chain tension

This should be done regularly. Refer to page 8 “Adjusting Chain Tension”.

Pole Saw Maintenance Section

Regular maintenance ensures a long effective life for the tool. After every 10 minutes of use be sure to remove the battery (be aware the chain and bar can be hot!) check the bar and chain for correct tension and lubricate per pole saw instruction manual. Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: Toassure product SAFETY and RELIABILITY,repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Accessories

 

 

 

Replacement chain and bar are available from your nearest Black &

Decker service center.

 

 

Replacement chain # 623382-00, Replacement bar # 623381-00

The use of accessories not recommended in this manual may be

hazardous.

Troubleshooting Section

If your Pole Saw does not operate correctly check the following:

Problem

Possible Cause

Possible Solution

•

Toolwill not

•

Battery not

•

Check battery installation.

 

start.

•

installed properly.

•

Check battery charging

 

 

Battery not

 

 

•

charged.

 

requirements.

 

 

Lock-out button not •

Pull back on lock

 

 

•

actuated.

•

button/actuate trigger.

 

 

Pole connections

Refer to instruction manual

 

 

 

not properly

 

for pole connections.

 

 

 

tightened.

•

Insert battery into charger

•

Unit will not

•

Battery not

 

charge.

 

inserted into

 

until green LED appears.

 

 

charger.

 

Charge up to 9 hours if

 

 

 

 

 

battery totally drained.

•

Bar / chain

•

Chain too tight.

•

Refer to section on

 

overheated.

•

Lubrication

•

adjusting chain tension.

 

 

Refer to sections for chain

 

 

 

needed.

 

oiling application.

•

Chain is

•

Chain tension set

• Refer to section for chain

 

loose.

 

incorrectly.

 

tensioning.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Cordless Pole Saw Do not operate Pole Saw Pinch or fall into chain General Safety RulesTo filter out microscopic particles Kickback Safety FeaturesSkinand mayw terpromote. absorption of harmful chemicals Battery in charger or tool Battery Cap Inform TionCharging Generator or DC power source. Use only 120V AC Chart for Minimum Wire Size Awgof Extension CordsNameplate Rating Amps 0 Outlet. Note Do not charge by means of an engineStorage Recommendation Leaving the Battery Pack in the ChargerSlot is located over the adjustment Pin Installing and Removing Saw ChainAnd/or serious personal injury Could result in serious personal injuryChain with graphic on housing shown here Adjusting Chain TensionChain Oiling Transporting Pole SawToattach the handle module to the saw head module Joining Saw Head Module to 18V Handle ModuleSlide the threaded sleeve 6 figure Becoming disconnected creating a hazardous conditionSwitch Connecting the BatteryDetaching Saw Head Module Auto-Stop Chain Braking SystemPruning With the Pole Saw Troubleshooting Section AccessoriesProblem Possible Cause Possible Solution Saw chain sharpnessProblem Troubleshooting Section Con’tPossible Cause Possible Solution See ʻTools-ElectricʼScie à long manche sans fil Pendant lʼutilisation de la scie à long manche Consignes DE Securite ImportantesNe pas utiliser la scie à long manche EntretienDispositif de protection contre les rebonds Règles de sécurité GénéralitésEn contact avec des fils électriques cachés ou son propre Tenir lʼoutil par les surfaces isolées prévues à cet effetAvertissement risque d’incendie. Ne pas ranger ni ne La sûreté et au fonctionnement Lutilisation dun accessoire non recommandé ni vendu parPile Mise EN Garde Afin de minimiser les risques deRésidentielle standard de 120 volts et de 60 Hz Le chargeur est conçu pour être branché dans une prise120 V, 60 Hz. Remarque Ne chargez pas la batterie au Moyen dun alternateur ou dune source dalimentation c.cGlossaire terminologique de la scie à long manche Recommandations DʼENTREPOSAGERanger loutil Ensemble DE Piles Dans LE ChargeurCaractéristiques Installation et retrait de la chaîne coupanteUtilisation Réglage de la tension de la chaîne Graissage de la chaîneAssemblage Assemblage du module de tête deTête de scie et le module de poignée Assemblage du module central avec le module deDémontage Pour détacher le module de tête de scie Pour prévenir tout accident, sʼassurer quela pile est bienBranchement de la pile Utilisation de la scie à long mancheInterrupteur Système de freinage dʼarrêt automatiqueÉbranchage avec la scie à long manche Guide de dép nnage AccessoiresAffûtage de la chaîne coupante Entretien de la scie à long mancheProblème Cause probable Solution possible Manual DE Instrucciones Al operar la garrocha podadora Reglas Importantes DE SeguridadServicio No opere la garrocha podadoraProtector contra rebote PrecaucionesNormas específicas de seguridad Serruchado, pulido y taladrado mecánico y otras actividades Información sobre el protector de la bateríaPiel expuestas con agua y jabón. Si permite que el polvo se Advertencia La utilización de esta herramienta puedeAmperios Segun Placa 0 a Tabla DE Medidas Minimas DE Conductor AWG ParaCargadas DE FÁBRICA. Paquete DE Baterías DE Paquete DE Bateríasno Vienen CompletamenteCarga DE AL Menos 9 Horas Antes DE SU USO Recomendacion Para EL AlmacenamientoDejando LA Batería EN EL Cargador Nombres y terminología para la garrocha podadoraBarra guía de rebote reducido Una barra guía que se ha Instalación y desmantelamiento de la cadena de la CaracterísticasSierra Aceitado de la cadena Ajuste de la tensión de la cadenaTransporte de la garrocha podadora Lo más que pueda y enrosque el Con el saliente de la parte interna delAdvertencia Siempre revise 40 módulos para verificar que no se vean hilos naranjosOperación de la garrocha Podadora Desmantelamiento Separación del módulo de la sierraConexión de la batería ConmutadorPara podar con la garrocha podadora Poda con laAdvertencia Accesorios Tensión de la cadena de la sierraCausa posible Posible solución Problema Sección de resolución de problemasProblema Causa posible Posible solución Epecificaciones NPP2018 Page Product Infomation · Identificacion DEL Producto Form No June Cat No. NPP2018 Copyright 2011 Black & Decker
Related manuals
Manual 44 pages 39.07 Kb

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents