Black & Decker NPP2018 Detaching Saw Head Module, Connecting the Battery, Switch

Page 11

Disassembly

 

 

Detaching Saw Head Module

 

 

WARNING: Sharp moving blade. To prevent accidental

operation, insure that battery is disconnected from the handle

and that the protective scabbard is in place on the chain before

performing the following operations. Failure to do this could result

in serious personal injury.

 

 

When detaching the modules, whether it is in the two

17

module or three module mode, always detach the

 

saw head module first. Todo this, rest the handle

 

module on the ground and grasp the center of the

 

saw head module with

 

 

one hand figure 17. Use 18

 

 

your other hand to loosen

 

 

the threaded sleeve

 

 

figure 18 and then pull

 

 

the two halves apart.

 

 

Repeat this process if the center extension

19

 

was attached.

 

 

Operating the Pole Saw

 

 

WARNING: Read and understand all

 

 

instructions. Failure to follow all

 

 

instructions listed below may result in

 

 

electric shock, fire and/or serious personal

 

 

injury.

 

 

Connecting the Battery

 

 

Place the battery in the tool as shown in

20

 

figure 19 and be certain that it is inserted

 

 

fully into the tool cavity until it “clicks” into

 

 

place. To remove the battery from the tool,

 

 

press down on the release button on the

 

 

back of the battery (figure 20) and slide

 

 

out.

 

 

Switch

Always be sure of your footing and grip the 21 Pole Saw firmly with both hands with the thumb and fingers encircling the handle. Toturn the tool ON pull the lock button (1) back with your thumb and then squeeze

the trigger (2) with your fingers as shown in figure 21. (Once the tool is running you can release the lock button.) Toturn the tool OFF,release the trigger.

Auto-Stop Chain Braking System

Your chain saw is fitted with an auto-stop chain braking system which will stop the chain quickly each time you release the rear trigger, or if kickback should occur. This system should be tested before every use.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cordless Pole Saw Do not operate Pole Saw Pinch or fall into chain General Safety RulesSkinand mayw terpromote. absorption of harmful chemicals Kickback Safety FeaturesTo filter out microscopic particles Charging Battery Cap Inform TionBattery in charger or tool Outlet. Note Do not charge by means of an engine Chart for Minimum Wire Size Awgof Extension CordsGenerator or DC power source. Use only 120V AC Nameplate Rating Amps 0Storage Recommendation Leaving the Battery Pack in the ChargerCould result in serious personal injury Installing and Removing Saw ChainSlot is located over the adjustment Pin And/or serious personal injuryTransporting Pole Saw Adjusting Chain TensionChain with graphic on housing shown here Chain OilingBecoming disconnected creating a hazardous condition Joining Saw Head Module to 18V Handle ModuleToattach the handle module to the saw head module Slide the threaded sleeve 6 figureAuto-Stop Chain Braking System Connecting the BatterySwitch Detaching Saw Head ModulePruning With the Pole Saw Saw chain sharpness AccessoriesTroubleshooting Section Problem Possible Cause Possible SolutionSee ʻTools-Electricʼ Troubleshooting Section Con’tProblem Possible Cause Possible SolutionScie à long manche sans fil Pendant lʼutilisation de la scie à long manche Consignes DE Securite ImportantesRègles de sécurité Généralités EntretienNe pas utiliser la scie à long manche Dispositif de protection contre les rebondsEn contact avec des fils électriques cachés ou son propre Tenir lʼoutil par les surfaces isolées prévues à cet effetAvertissement risque d’incendie. Ne pas ranger ni ne Mise EN Garde Afin de minimiser les risques de Lutilisation dun accessoire non recommandé ni vendu parLa sûreté et au fonctionnement PileMoyen dun alternateur ou dune source dalimentation c.c Le chargeur est conçu pour être branché dans une priseRésidentielle standard de 120 volts et de 60 Hz 120 V, 60 Hz. Remarque Ne chargez pas la batterie auEnsemble DE Piles Dans LE Chargeur Recommandations DʼENTREPOSAGEGlossaire terminologique de la scie à long manche Ranger loutilUtilisation Installation et retrait de la chaîne coupanteCaractéristiques Assemblage du module de tête de Graissage de la chaîneRéglage de la tension de la chaîne AssemblagePour prévenir tout accident, sʼassurer quela pile est bien Assemblage du module central avec le module deTête de scie et le module de poignée Démontage Pour détacher le module de tête de scieSystème de freinage dʼarrêt automatique Utilisation de la scie à long mancheBranchement de la pile InterrupteurÉbranchage avec la scie à long manche Entretien de la scie à long manche AccessoiresGuide de dép nnage Affûtage de la chaîne coupanteProblème Cause probable Solution possible Manual DE Instrucciones Al operar la garrocha podadora Reglas Importantes DE SeguridadPrecauciones No opere la garrocha podadoraServicio Protector contra reboteNormas específicas de seguridad Advertencia La utilización de esta herramienta puede Información sobre el protector de la bateríaSerruchado, pulido y taladrado mecánico y otras actividades Piel expuestas con agua y jabón. Si permite que el polvo seAmperios Segun Placa 0 a Tabla DE Medidas Minimas DE Conductor AWG ParaRecomendacion Para EL Almacenamiento Paquete DE Bateríasno Vienen CompletamenteCargadas DE FÁBRICA. Paquete DE Baterías DE Carga DE AL Menos 9 Horas Antes DE SU USOBarra guía de rebote reducido Una barra guía que se ha Nombres y terminología para la garrocha podadoraDejando LA Batería EN EL Cargador Sierra CaracterísticasInstalación y desmantelamiento de la cadena de la Transporte de la garrocha podadora Ajuste de la tensión de la cadenaAceitado de la cadena 40 módulos para verificar que no se vean hilos naranjos Con el saliente de la parte interna delLo más que pueda y enrosque el Advertencia Siempre reviseConmutador Desmantelamiento Separación del módulo de la sierraOperación de la garrocha Podadora Conexión de la bateríaAdvertencia Poda con laPara podar con la garrocha podadora Accesorios Tensión de la cadena de la sierraProblema Causa posible Posible solución Sección de resolución de problemasCausa posible Posible solución Problema Epecificaciones NPP2018 Page Product Infomation · Identificacion DEL Producto Form No June Cat No. NPP2018 Copyright 2011 Black & Decker
Related manuals
Manual 44 pages 39.07 Kb

NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents