Intended use, Chain saw names and terms

90560838 ccs818 chain saw.qxd: chainsaw booklet new 2/12/10 10:07 AM Page 2

Intended use

Your Black & Decker Cordless Chain Saw is ideal for pruning applications and cutting small logs up to 8 inches (203 mm) in diameter. This tool is intended for consumer use only.

Chain saw names and terms

•Bucking - The process of cross cutting a felled tree or log into lengths.

•Motor Brake - A device used to stop the saw chain when the trigger is released.

•Chain Saw Powerhead - A chain saw without the saw chain and guide bar.

•Drive Sprocket or Sprocket - The toothed part that drives the saw chain.

•Felling - The process of cutting down a tree.

•Felling Back Cut - The final cut in a tree felling operation made on the opposite side of the tree from the notching cut.

•Front Handle - The support handle located at or toward the front of the chain saw.

•Front Hand Guard - A structural barrier between the front handle of a chain saw and the guide bar, typically located close to the hand position on the front handle and sometimes employed as an activating lever for a chain brake.

•Guide Bar - A solid railed structure that supports and guides the saw chain.

•Guide Bar Scabbard - Enclosure fitted over guide bar to prevent tooth contact when saw is not in use.

•Kickback - The backward or upward motion, or both of the guide bar occurring when the saw chain near the nose of the top area of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut.

•Kickback, Pinch - The rapid pushback of the saw which can occur when the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar.

•Kickback, Rotational - The rapid upward and backward motion of the saw which can occur when the moving saw chain near the upper portion of the tip of the guide bar contacts an object, such as a log or branch.

•Limbing - Removing the branches from a fallen tree

•Low-Kickback Chain - A chain that complies with the kickback performance requirements of ANSI B175.1-1991 (when tested on a representative sample of chain saws.)

•Normal Cutting Position - Those positions assumed in performing the bucking and felling cuts.

•Notching Undercut - A notch cut in a tree that directs the treeʼs fall.

•Oiler Control - A system for oiling the guide bar and saw chain.

•Rear Handle - The support handle located at or toward the rear of the saw.

•Reduced Kickback Guide Bar - A guide bar which has been demonstrated to reduce kickback significantly.

•Replacement Saw Chain - A chain that complies with kickback performance requirements of ANSI B175.1-2000 when tested with specific chain saws. It may not meet the ANSI performance requirements when used with other saws.

•Saw Chain - A loop of chain having cutting teeth, that cut the wood,and that is driven by the motor and is supported by the guide bar.

•Ribbed Bumper - The ribs used when felling or bucking to pivot the saw and maintain position while sawing.

•Switch - A device that when operated will complete or interrupt an electrical power circuit to the motor of the chain saw.

•Switch Linkage - The mechanism that transmits motion from a trigger to the switch.

•Switch Lockout - A movable stop that prevents the unintentional operation of the switch until manually actuated.

Important Safety Instructions

WARNING: When using a battery operated chain saw, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS.

CCS818, CCS818R specifications

The Black & Decker CCS818 and CCS818R are innovative cordless electric saws designed for both professional and home use. These lightweight chainsaws are powered by an 18-volt lithium-ion battery, providing the freedom of movement without the constraints of a cord, making them perfect for a variety of cutting tasks in the garden or around the property.

One of the key features of the CCS818 and CCS818R is their 8-inch cutting bar, which allows for efficient cutting of limbs and small trees while ensuring portability and ease of use. Despite their compact size, these saws are capable of cutting through material with confidence, thanks to their robust chain system that grips and cuts smoothly through wood.

In terms of technology, the CCS818 models integrate an automatic oiling system to ensure the chain operates smoothly while reducing wear and tear. This feature simplifies maintenance, allowing users to focus on the task at hand rather than worrying about manual lubrication. Additionally, a transparent oil tank provides a quick view of oil levels, helping users monitor and maintain optimal performance.

The ergonomic design of the CCS818 and CCS818R further enhances their usability. The saws are equipped with a wraparound handle, providing a secure and comfortable grip, which reduces hand fatigue during extended use. The lightweight design also makes these saws user-friendly, especially for those who may not have prior experience handling a chainsaw.

Another characteristic worth mentioning is the tool-free chain tensioning system. This feature allows users to make chain adjustments quickly and easily without the need for additional tools, thus improving workflow efficiency. The CCS818 and CCS818R are also designed with safety in mind, equipped with a chain brake that helps prevent accidents and ensures safe operation.

In summary, the Black & Decker CCS818 and CCS818R chainsaws provide a perfect blend of power and convenience for anyone in need of a reliable cutting tool. Their lightweight design, lithium-ion battery power, automatic oiling, and ease of use make them standout choices for gardening enthusiasts and professionals alike. Whether trimming branches or tackling small tree removals, these chainsaws offer the performance and versatility needed to get the job done efficiently and safely.