| TRIMMER / EDGER |
|
| INSTRUCTIONMANUAL |
|
| Model Number GH710 |
|
| to www.BlackandDecker.com/NewOwner |
|
| to register your new product. |
|
| PLEASE READ BEFORE RETURNING |
|
|
| |
| THIS PRODUCT FOR ANY REASON: |
|
| If you have a question or experience a problem with your |
|
| Black & Decker purchase, go to |
|
| WWW.BLACKANDDECKER.COM/INSTANTANSWERS |
|
| for instant answers 24 hours a day. |
|
| If you canʼt find the answer or do not have access to the internet, |
|
| call |
|
| to speak with an agent. |
|
| Please have the catalog number available when you call. |
|
| SAVE THIS MANUAL FOR FUTURE REFERENCE. |
|
| VEA EL ESPAÑOL EN LA CONTRAPORTADA. |
|
| POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE. |
|
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIOY |
| |
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE |
| |
INSTRUCTIVO ANTES DE USAR EL PRODUCTO. | 1 | |
|
|
Model No. GH710
KEY INFORMATION YOU SHOULD KNOW:
• The guard must be installed before trimming or edging - if not, the motor will overheat (page 5).
• When replacing the line, use only .065 inch diameter ROUND line (B&D Model No.
• Do not bump the feed head against the ground - it will disrupt the feed mechanism.
• Always use the cord retention feature (page 7).