HYDROTHERAPY JETS
Your spa is equipped with the follow- ing jets:
You can adjust the volume of water
from these jets by turning the face Adjustable jets plate clock wise to decrease the vol-
ume of water and counter clock wise to increase it. You can also change the direction of the water flow by pushing on the side of the small orifice in the centre of the trim kit.
Micro Directional
WARNING:
All jet trim kits must be properly seated or
air flow may be restricted
You can adjust the volume of water from the micro swirl jets by turning the face plate 1/2 turn clockwise to decrease the volume of water and counter clock wise to increase it.
The
spa surface then push with a gentle upwards motion and the trim kit will pop out of the jet body. To replace just place the trim kit into the jet body and gently push it into place. Be careful not to scratch the spa surface with the screwdriver and do not force the trim kit into or out of the jet body. To remove adjustable jets, pop them out an inch then unscrew them.
14