Operation of LuxeAir series

NOTE: DO NOT START PUMP UNTIL ALL JETS ARE SUBMERGED. WATER LEVEL SHOULD BE 2” ABOVE HIGHEST JET.

jet operations:

All LuxeAir Series jets are removable, and can simply be put into the dishwasher for easy cleaning. (Note: use top rack and remove before drying cycle.)

LuxEAIR Series Whirlpool Jets

The LuxeAir Series combines Full-Size Pressure-Flo Hydrotherapy Jets, Aquatic Rotary Massage Jets and StressEaz Neck and Shoulder Massage Jets (most models) to provide an invigorating hydrotherapy experience.

Full Size Pressure-Flo Hydrotherapy Jet:

All Full-Size Pressure-Flo Hydrotherapy Jets can be interchanged with the Hand Held Jet. note: For operation information, please see Diagrams 12A, 12B and 12C on page 17.

Aquatic Rotary Massage Jet:

The Aquatic Rotary Massage Jet is a highly versatile, full-size jet. As with all jets in this series, the pressure and circular pattern are fully adjustable.

• To adjust pressure (see Diagram 10A):

1.Grasp the outer ring of the jet.

2.Turn the outer ring clockwise to increase flow, counter-clockwise to shut off.

• To adjust circular pattern (see Diagrams 10A, 10B, and 10C):

1.Small circular pattern: slide the nozzle until it is positioned in the center of the jet.

2.Medium circular pattern: slide the nozzle to the desired location for a medium pattern.

3.Large circular pattern: slide the nozzle to the desired location for a large pattern.

• To remove jet (see Diagram 10D):

1.Grasp the outer ring of the jet.

2.Turn the jet counter-clockwise, until the jet clicks, then pull.

10A

10B

• To replace jet (see Diagram 10D):

10C

1.Insert the jet into jet housing.

2.Turn the jet clockwise, past point of resistance, until the jet clicks.

10D

Aquatic Industries, Inc.