Alamo 6, 5 manual Maintenance, Lubrication Information

MAINTENANCE

MAINTENANCE

LUBRICATION INFORMATION

For continued good cutting and trouble-free operation, it is important to follow these instructions accurately.

Shut off the tractor engine and remove key before lubricating the mower.

Greasing: Wipe dirt from grease fittings and grease gun nozzle before greasing. Replace missing or damaged grease fittings immediately. Use a good grade of lithium based #2 grease where grease fittings are provided. Do not over-lubricate. Stop as soon as clean grease emerges from the joint, unless noted other wise below.

This safety alert symbol is used to point out areas requiring precautions for your safety. Failure to observe these warnings could result in injury to you. DO NOT attempt to make adjustments with the mower or tractor running!

SB5/6 03/09 Maintenance Section 4-2

© 2009 Alamo Group Inc.