Alamo 02979718C manual To the OWNER/OPERATOR/DEALER

Page 109

TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety require- ments of tractor operators:

REQUIRED OF THE OWNER:

1.Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and

2.Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and

3.Ensure that each employee uses such Seatbelt while the tractor is moving; and

4.Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS.

REQUIRED OF THE OPERATOR

1.Securely fasten seatbelt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.Stay off slopes too steep for safe operation.

5.Watch where you are going - especially at row ends, on roads, and around trees.

6.Do not permit others to ride.

7.Operate the tractor smoothly - no jerky turns, starts, or stops.

8.Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.

9.When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all machinery

guards in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Image 109
Contents Under the Guardrail To the Owner/Operator/Dealer Page Alamo Industrial Division is willing to provide Table of Contents Page Safety Section Safety Safety Safety UGR 04/06 Safety Section Safety Safety Blade SBM-7 Safety STI-3 Decal Location QTY Type Description Reflect Safety Safety Safety Safety Federal Laws and Regulations Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Mounting on Bare Tractor Receiving InstructionsSee Figure Asm-R-0242 Assembly Control Cable Connection to Control Stick Assemblies Assembly Operation Section Operation Operator Requirements OperationTractor Horsepower Tractor Safety DevicesTractor Requirements Tractor Requirements and CapabilitiesTractor Hydraulics Getting on and OFF the TractorBoarding the Tractor Dismounting the Tractor Starting the Tractor PRE-OPERATION Inspection and ServiceOperation Tractor Pre-Operation Inspection/Service Driving the Tractor and Implement Starting the Tractor Brake and Differential Lock Setting Do not Operate an Unsafe Tractor or Mower Rotary Mower PRE-OPERATION Inspection Operating the Tractor and Implement Motor Control Position ControlsMower Break Back Tractor Mowing Speed Transporting on Public Roadways Transporting the Tractor and ImplementOperation Hauling the Tractor and Implement Operation Page Maintenance Section Lubrication Information MaintenanceReservoir OIL & Filter Maintenance Initial Hydraulic System CleaningMaintenance Pump & Motor Hydraulic SystemALAMO-INDUSTRIAL To the OWNER/OPERATOR/DEALER UGR- SOM-04/06 02979718C Printed U.S.A