Alamo 02979718C manual Driving the Tractor and Implement

Page 90
(SG-4)
(SG-34)
(SG-15)

OPERATION

OPERATION

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and fuel are explosive and their presence could present a hazard. Do not check for leaks with your hand! High-pressure oil streams from breaks in

the line could penetrate the skin and cause tissue damage including gangrene. To check for a hose leak, SHUT the tractor ENGINE OFF and remove all hydraulic pressure. Wear oil impenetrable gloves, safety glasses and use Cardboard to check for evidence of oil leaks. If you suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil does penetrate the skin, have the injury treated immediately by a physician knowledgeable and skilled in this procedure.

Attention: Oil Filler Cap is also the Pressure Relief Cap.

Remove cap slowly to relieve pressure before removing cap completely. Stay clear to pre- vent being scalded with hot oil that may spray out of the tank that is still pressurized and may cause serious injury to eyes, face, and exposed skin. (Ops-0001-MISC)

Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves and eye protection when servicing hot components. Contact with a hot surface

or fluid can cause serious injury from burns or scalding.

DRIVING THE TRACTOR AND IMPLEMENT

Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement. Ensure the tractor has the capacity to handle the weight of the implement and the tractor operating controls are set for safe transport. To ensure safety while driving the tractor with an attached implement, review the following. OPS-U- 0012

Never operate the Tractor or Implement until you have read and completely understand this Manual, the Tractor Operator’s Manual, and each of the Safety Messages found in the Manual or on the Tractor and

Implement. Learn how to stop the tractor engine suddenly in an emergency. Never allow inexperienced or untrained personnel to operate the Tractor and Implement without supervision. Make sure the operator has fully read and understood the manuals prior to operation.

UGR 04/06

Operation Section 4-10

© 2006 Alamo Group Inc.

Image 90
Contents Under the Guardrail To the Owner/Operator/Dealer Page Alamo Industrial Division is willing to provide Table of Contents Page Safety Section Safety Safety Safety UGR 04/06 Safety Section Safety Safety Blade SBM-7 Safety STI-3 Decal Location QTY Type Description Reflect Safety Safety Safety Safety Federal Laws and Regulations Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Receiving Instructions Mounting on Bare TractorSee Figure Asm-R-0242 Assembly Control Cable Connection to Control Stick Assemblies Assembly Operation Section Operation Operation Operator RequirementsTractor Requirements Tractor Safety DevicesTractor Horsepower Tractor Requirements and CapabilitiesGetting on and OFF the Tractor Tractor HydraulicsBoarding the Tractor Dismounting the Tractor PRE-OPERATION Inspection and Service Starting the TractorOperation Tractor Pre-Operation Inspection/Service Driving the Tractor and Implement Starting the Tractor Brake and Differential Lock Setting Do not Operate an Unsafe Tractor or Mower Rotary Mower PRE-OPERATION Inspection Operating the Tractor and Implement Position Controls Motor ControlMower Break Back Tractor Mowing Speed Transporting the Tractor and Implement Transporting on Public RoadwaysOperation Hauling the Tractor and Implement Operation Page Maintenance Section Maintenance Lubrication InformationInitial Hydraulic System Cleaning Reservoir OIL & Filter MaintenanceMaintenance Hydraulic System Pump & MotorALAMO-INDUSTRIAL To the OWNER/OPERATOR/DEALER UGR- SOM-04/06 02979718C Printed U.S.A