Alamo 95C manual Introduction

Page 26

INTRODUCTION

INTRODUCTION

Rhino C Series Backhoes are designed to provide years of outstanding service. C Series Backhoes are designed to fit on a wide range of compact and utility class tractors operating in a wide range of conditions. C Series backhoes should be mounted to a sub-frame on tractors smaller than 50 PTO HP or to a 3-Point mount for larger tractors.

The purpose of this manual is to assist you with proper assembly, operation and maintenance of your new C Series Backhoe. Successful operation and long life of the backhoe depends on proper maintenance and care during operation. Please read and follow the instructions provided in this manual carefully. Additional instructions and information may be provided with your backhoe’s sub-frame or mounting kit or hydraulic kit. That information should be kept with this manual at all times.

A Front End Loader or adequate front ballasting weight is required before operating or transporting a backhoe attachment.

Note: This safety alert symbol identifies important safety messages in this manual. Observe and follow all safety messages to prevent personal injury.

Reference to left-hand and right-hand used in this manual refers to position of operator when seated in the operating position of backhoe.

If at any time you have a service problem with your backhoe or need new parts, contact your local dealer. Your dealer will need your backhoe model number and serial number to give you prompt efficient service.

Parts orders must give complete description, correct part number, total amount required, model number, all necessary serial numbers, method of shipment and shipping addresss.

F-4145 01/11

Introduction Section 2-2

© 2011 Alamo Group Inc.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents 95C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety Safety Safety Safety Equipment Operation Safety Instructions and Practices SBH-14 Safety Safety SBH-44 Transporting Safety Instructions and Practices Death. SBH-27 Storage Safety Instructions and Practices Parts Information See Your Rhino DealerDecal Location QTY Level Description Decal Description Safety Federal Laws and Regulations Page Introduction Section Introduction Cylinder Data General DataBucket Data Introduction Assembly Section Assembly Installing Three Point Adapter Option Mounting Backhoe to Tractor Operation Section Engine Speed PRE-OPERATION ChecklistOperating Directions ControlsOperating Backhoe Left Hand StabilizerRight Hand Stabilizer Trenching Between a Building & Open Excavators Filling BucketDumping Bucket Side Slope Excavating or Trenching Miscellaneous Finishing Straight WallsMounting and Dismounting Buckets Seat AdjustmentBackfilling Boom Lock Placing the StabilizersSwing Lock Stabilizer LockRemoval from Tractor Storage Page Maintenance Section Cylinder Assembly Cylinder ServiceCylinder Disassembly Hydraulic System Reservoir Beginning of SeasonHydraulic Hoses Tightening Nuts and Bolts Lubrication ChartBucket Tooth Points LubricationHydraulic Troubleshooting Maintenance Spool Seal Installation Valve ServiceMain Relief Replacement Torque SettingsMaintenance Parts List Description QTYProper Torque for Fasteners Page Rhino Required of the Owner 95C-SOM-01/11 F-4145C Printed U.S.A

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.
Top Page Image Contents