Maintenance | Alamo 95C specs

MAINTENANCE

	POSSIBLE CAUSE	CORRECTIVE ACTION

15	Excessive back	Restriction between “in”
	pressure.	and “out” port and
		reservoir.

16	Paint on valve spool.	Clean valve spool.
	Sticking valve spool,	Binding may be caused
	or scored valve.	by over tightened plug,
		mounting bolt, fitting or tie
		rod bolt. See Item 30.

17	Oil leakage past	If spool cap contains oil,
	spool seal into spool	replace spool seal o-ring.
	cap.	If o-ring retainer is
		“bellied”, check for
		restriction from “out” port
		reservoir. See Item 30.

18	Broken return	Replace broken return
	springs.	springs.

19	Bent spool.	Return for factory repair
		or replace with new spool
		section. See Item 30.

20	Foreign particles.	Clean system and valve.

21	Misalignment of	Check linkage for binding
	control handle	condition.
	linkage.

22	Spool not moved to	Spool travel should be
	full stroke.	5/16” either way or 5/8”
		total.

23	Relief valve setting	Clean or overhaul relief
	in control valve too	valve or replace cartridge.
	low or defective.	Refer to VALVE
		SERVICE section for
		proper PSI settings.

24	Overload relief valve	Clean relief. Do not
	in control valve	disturb pressure setting
	stuck open or	or replace cartridge.
	malfunctioning.

25	Worn control valve.	Replace control valve.

26	Check poppet in	Clean check poppet(s)
	control valve not	carefully. Ensure free
	holding.	movement and proper
		seating or replace check
		poppet. See Item 30.

27	Damaged or worn	Replace spool end seals.
	spool seals.

28	Check ball in anti-	Clean anti-cavitation
	cavitation is stuck or	valve carefully. Assure
	not seated properly.	that checks move freely
		and seat properly or
		replace cartridge. See
		Item 30.

29	Valve cap and	Loosen screws holding
	center return	cap on valve (ref. Valve
	mechanism binding.	Service image). Operate
		valve spool and retighten
		screws.

30.This valve is a precision device and is not intended for extensive field adjustment or repair. Field replacement parts are limited to seal kits, cartridges and tie rod ends. Beyond replacement of these parts, opening of check cavities and certain relief valve cavities to examine for trapped dirt, or resetting main relief valve with the use of a good pressure gauge, valve should be returned for service.

Dirt and shreds of packing material are the usual causes of valve malfunction. Be sure that oil supply is kept clean. Use only factory supplied packings in cylinder repair. Fittings and hoses must be clean before being removed.

NOTE: Pay close attention to all caution warning notes so valve will not have to be returned to manufacturer for reconditioning.

Troubleshooting guide is designed to help qualified individuals, with valve service training, correct minor problems which may develop. If valve is under warranty do not attempt disassembly for repairs. Contact your authorized dealer. Any attempt to disassemble valve during warranty period will VOID warranty.

F-4145 01/11

Maintenance Section 5-6

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.