Alamo 95C manual Assembly

Page 30

ASSEMBLY

ASSEMBLY

INSTALLING PUMP KIT (Optional)

NOTE: Drawbar may need to be removed if it interferes with reservoir. If drawbar can be left in place, retaining bracket (4) should be installed on left side of pump as shown and positioned on left side of tractor drawbar.

1.Fasten hydraulic pump retaining bracket (4) to pump

(6)using 3/8-16 x 1-1/4 cap screws (19) and 3/8 lock washers (21). Fasten one end of chain (8) to pump retaining bracket using only “U” bolt of wire rope clip

(5)and 5/16 lock nuts that come up with clip.

NOTE: Wrap chain tightly around hitch bracket on tractor to prevent pump from slipping off PTO shaft.

2.Fasten tank (1) to backhoe using 3/8 x 1 cap screws (23), 3/8 flat washers 924) and 3/8 lock nuts (25).

3.Install 3/4 NPT x 3/4 NPT 90° elbow (17) to right tank port. Point fitting up.

4.Install filter body (without filter element) to 3/4 elbow (17). Be sure oil flow (arrow on filter body) is correct. Position body so element points right. Install filter element (7).

5.Install 3/4 NPT x 3/4 JIC fitting (16) to filter body.

6.Install 1-1/4 strainer (10) and 3/4 NPT x 3/4 NPT 90° elbow to left tank port.

7.Install 1-5/16 o-ring x 1-1/16 JIC to “IN” port on pump. Install 3/4 x 1-1/16 elbow fitting (15) to “OUT” port on pump.

8.Connect suction hose (3) to left port on reservoir and to “IN” port on pump.

9.Connect pressure hose (12) to “OUT” port on pump and “IN” port on valve. Connect tank hose (11) to “OUT” port on valve and to filter on hydraulic reservoir.

10.Fill reservoir to within 1 inch from top with 10W or 20W hydraulic oil with SAE J183-M2C33F classification. Dextron 2 ATF fluid and 10W engine oil with API “SD” classification are also acceptable. Install breather cap (2) to reservoir.

NOTE: After cycling all cylinders, recheck oil level. Empty reservoir requires 4 gallons to fill to 1 inch from top.

F-4145 01/11

Assembly Section 3-2

© 2011 Alamo Group Inc.

Image 30
Contents 95C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety Safety Safety Safety Equipment Operation Safety Instructions and Practices SBH-14 Safety Safety SBH-44 Transporting Safety Instructions and Practices Death. SBH-27 Storage Safety Instructions and Practices Parts Information See Your Rhino DealerDecal Location QTY Level Description Decal Description Safety Federal Laws and Regulations Page Introduction Section Introduction General Data Bucket DataCylinder Data Introduction Assembly Section Assembly Installing Three Point Adapter Option Mounting Backhoe to Tractor Operation Section Engine Speed PRE-OPERATION ChecklistOperating Directions ControlsLeft Hand Stabilizer Right Hand StabilizerOperating Backhoe Filling Bucket Dumping BucketTrenching Between a Building & Open Excavators Side Slope Excavating or Trenching Miscellaneous Finishing Straight WallsSeat Adjustment BackfillingMounting and Dismounting Buckets Boom Lock Placing the StabilizersSwing Lock Stabilizer LockRemoval from Tractor Storage Page Maintenance Section Cylinder Service Cylinder DisassemblyCylinder Assembly Beginning of Season Hydraulic HosesHydraulic System Reservoir Tightening Nuts and Bolts Lubrication ChartBucket Tooth Points LubricationHydraulic Troubleshooting Maintenance Spool Seal Installation Valve ServiceMain Relief Replacement Torque SettingsMaintenance Parts List Description QTYProper Torque for Fasteners Page Rhino Required of the Owner 95C-SOM-01/11 F-4145C Printed U.S.A

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.