Alamo 95C manual Required of the Owner

Page 55

TO THE OWNER/OPERATOR/DEALER

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety require- ments of tractor operators:

REQUIRED OF THE OWNER:

1.Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and

2.Provide Seat belts that meet the requirements of this paragraph of this Standard and SAE J4C; and

3.Ensure that each employee uses such Seat belt while the tractor is moving; and

4.Ensure that each employee tightens the Seat belt sufficiently to confine the employee to the protected area provided by the ROPS

REQUIRED OF THE OPERATOR:

1.Securely fasten seat belt if the tractor has a ROPS.

2.Where possible, avoid operating the tractor near ditches, embankments, and holes.

3.Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.

4.Stay off slopes too steep for safe operation.

5.Watch where you are going - especially at row ends, on roads, and around trees.

6.Do not permit others to ride.

7.Operate the tractor smoothly - no jerky turns, starts, or stops.

8.Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.

9.When the tractor is stopped, set brakes securely and use park lock, if available.

Keep children away from danger all day, every day...

Equip tractors with rollover protection (ROPS) and keep all machinery guards in place...

Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens.

Page 54 Page 56
Image 55
Page 54 Page 56
Contents 95C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety Safety Safety Safety Equipment Operation Safety Instructions and Practices SBH-14 Safety Safety SBH-44 Transporting Safety Instructions and Practices Death. SBH-27 Storage Safety Instructions and Practices See Your Rhino Dealer Parts InformationDecal Location QTY Level Description Decal Description Safety Federal Laws and Regulations Page Introduction Section Introduction Bucket Data General DataCylinder Data Introduction Assembly Section Assembly Installing Three Point Adapter Option Mounting Backhoe to Tractor Operation Section Controls PRE-OPERATION ChecklistOperating Directions Engine SpeedRight Hand Stabilizer Left Hand StabilizerOperating Backhoe Dumping Bucket Filling BucketTrenching Between a Building & Open Excavators Side Slope Excavating or Trenching Finishing Straight Walls MiscellaneousBackfilling Seat AdjustmentMounting and Dismounting Buckets Stabilizer Lock Placing the StabilizersSwing Lock Boom LockRemoval from Tractor Storage Page Maintenance Section Cylinder Disassembly Cylinder ServiceCylinder Assembly Hydraulic Hoses Beginning of SeasonHydraulic System Reservoir Lubrication Lubrication ChartBucket Tooth Points Tightening Nuts and BoltsHydraulic Troubleshooting Maintenance Torque Settings Valve ServiceMain Relief Replacement Spool Seal InstallationMaintenance Description QTY Parts ListProper Torque for Fasteners Page Rhino Required of the Owner 95C-SOM-01/11 F-4145C Printed U.S.A

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.
Top Page Image Contents