Alamo 95C manual Installing Three Point Adapter Option

Page 31

ASSEMBLY

INSTALLING THREE POINT ADAPTER (Option)

ASSEMBLY

1.Install link pins (7) to backhoe using 7/8 lock washers (14) and 7/8 nuts (15).

2.Join upper link (1) and center link (2) using 3/4 x 2-1/2 cap screws (9) and 3/4 lock nuts (11). Leave a minimum of 3-3/4 inches between bolts.

NOTE: Leave hardware loose. Assembly may need to be lengthened or shortened to mount backhoe mainframe in vertical position.

3.Install link assembly to backhoe mainframe using clevis pin (12) and hairpin cotter (13).

4.Fasten support braces (3) to backhoe using 3/4 x 2 cap screws (10) and 3/4 lock nut (11) and to link assembly using 3/4 x 4 cap screw (9), bushing (5) and 3/4 lock nut (11).

NOTE: Support brace must be fastened within 6-3/4 inches of link point that fastens to tractor. Bottom end of support braces are mounted to inside

F-4145 01/11

Assembly Section 3-3

Image 31

Contents 95C To the OWNER/OPERATOR/DEALER Table of Contents Page Safety Section Safety Safety Safety Safety Equipment Operation Safety Instructions and Practices SBH-14 Safety Safety SBH-44 Transporting Safety Instructions and Practices Death. SBH-27 Storage Safety Instructions and Practices See Your Rhino Dealer Parts InformationDecal Location QTY Level Description Decal Description Safety Federal Laws and Regulations Page Introduction Section Introduction Bucket Data General DataCylinder Data Introduction Assembly Section Assembly Installing Three Point Adapter Option Mounting Backhoe to Tractor Operation Section Controls PRE-OPERATION ChecklistOperating Directions Engine SpeedRight Hand Stabilizer Left Hand StabilizerOperating Backhoe Dumping Bucket Filling BucketTrenching Between a Building & Open Excavators Side Slope Excavating or Trenching Finishing Straight Walls MiscellaneousBackfilling Seat AdjustmentMounting and Dismounting Buckets Stabilizer Lock Placing the StabilizersSwing Lock Boom LockRemoval from Tractor Storage Page Maintenance Section Cylinder Disassembly Cylinder ServiceCylinder Assembly Hydraulic Hoses Beginning of SeasonHydraulic System Reservoir Lubrication Lubrication ChartBucket Tooth Points Tightening Nuts and BoltsHydraulic Troubleshooting Maintenance Torque Settings Valve ServiceMain Relief Replacement Spool Seal InstallationMaintenance Description QTY Parts ListProper Torque for Fasteners Page Rhino Required of the Owner 95C-SOM-01/11 F-4145C Printed U.S.A

95C specifications

The Alamo 95C is a sophisticated compact tractor that has been designed to meet the demands of both agricultural and light industrial applications. With its robust construction and versatile functionalities, it has become a popular choice among farmers, landscapers, and small property owners.

One of the standout features of the Alamo 95C is its powerful engine. Equipped with a reliable diesel power plant, it delivers impressive performance while maintaining fuel efficiency. The engine is tailored to produce high torque at low RPM, ensuring that the tractor can handle tough tasks with ease, from plowing fields to hauling heavy loads.

The Alamo 95C is designed for ease of operation. It features an ergonomic control layout and a comfortable operator platform, allowing for prolonged use without causing fatigue. The intuitive controls and simplified interface make it accessible even for less experienced operators. Its tight turning radius enhances maneuverability, making it ideal for working in confined spaces.

In terms of technology, the Alamo 95C is outfitted with modern electronic systems that improve overall performance and efficiency. The tractor comes with a digital dashboard that provides real-time data on engine parameters, fuel levels, and other vital statistics. This allows operators to monitor performance closely and make informed decisions while working.

The Alamo 95C is also designed with versatility in mind. It can be outfitted with a range of attachments, including loaders, backhoes, and mowers, enabling it to adapt to various tasks. The three-point hitch system allows for easy attachment of implements, while the Power Take-Off (PTO) system ensures that it can power a variety of tools and equipment.

Durability is another key characteristic of the Alamo 95C. Its frame is constructed from high-quality materials, ensuring it can withstand harsh working conditions. Additionally, it has been engineered for ease of maintenance, with accessible components that simplify routine checks and repairs.

Overall, the Alamo 95C combines power, efficiency, and versatility, making it an excellent investment for anyone looking to maximize productivity on their property. With its advanced features and robust design, it continues to set a standard in the compact tractor market. Whether for agricultural purposes or landscaping tasks, the Alamo 95C proves to be a dependable and efficient workhorse.