Cal Spas GFCI manual Adjustable Therapy System, Multi-Colored Spa Light Operation, Aromatherapy

Page 22

Operating Your Spa

Adjustable Therapy System™

Pump On/Off

This button allows the user to turn on and off the ATS™ seat pump. Press this button once to turn the pump on. Once on, the green LED light on the control panel will illuminate, indicating that the system is operational. To turn

off the pump, press the “PUMP ON/OFF” button a second time. Note: The pump must be on prior to operating any other features of this system.

Pulse Mode

This button allows the user to turn the ATS™ massage control on and off. Press the pulse button once to turn on the massage control. Once pressed, the orange LED in position number 1will light, indicating the number one pulse mode. Each press of either the up or down button will move the orange LED up or down to the next pulse mode.

Note: Allow one second between each button press. Pressing the button quickly may cause improper operation. To turn the pulse mode off and return to normal pump operation, press the “PULSE MODE” button a second time.

Up

This button allows the user to cycle up from one through seven massage modes one at a time. Each mode offers a different pulsating massage. Some modes are faster than others, so just cycle through them to find the massage you like best.

Down

This button allows the user to cycle down through all seven massage modes, one at a time.

Time Reset Mode

Pulse mode will normally run for 15 minutes then automatically shut off. For another 15-minute session, press the “PUMP ON/OFF” button and the “PULSE MODE” button. A green LED will blink and the pump will run on high-speed mode as part of a 15-minute cool down period. After that, the pump will stop automatically and the green LED light on the panel will continue to

blink for one minute then shut off automatically. After the second 15-minute session, the system will run through a cool down cycle for up to two hours. In this cool down mode, the user will only be able to operate the pump (by again pressing the “PUMP ON/OFF” button). However, the massage mode will remain off until the cool down mode is completed.

Pulse Mode System

Pulse mode system will shut off for two hours unless reset by the following procedure. During this time the pump will run at a maximum speed.

•In the off position, press the “PULSE MODE” button once.

•The green power light will flash to indicate reset.

Multi-Colored Spa Light

Operation

1.Turn the spa light on by pressing the “LIGHT” button on the topside control panel.

2.To filter through the different color choices, press the button on and off. Each time you press the button, you advance to the next color.

3.To turn the spa light off when not in use, press the “LIGHT” button.

Aromatherapy

This optional accessory is very easy to use. Unscrew the cap on the aromatherapy chamber and drop in a bag of scented aromatherapy beads and replace the cap.

Waterfalls

Some spa series include optional waterfalls. When the booster pump is on, turn the knob near the waterfall, or rotate the dial on top of the waterfall. Water will immediately start flowing through it.

Page 20

2008 Portable Spa Owner’s Manual

LTR20081000, Rev. D

Page 21 Page 23
Image 22
Page 21 Page 23
Contents LTR20081000, Rev. D 12/08 Water Quality Maintenance Appendix Cleaning and MaintenanceUsing the Entertainment System Read This FirstBasic Spa Information Important Safety InstructionsRead This First Hyperthermia DangerRead This First Planning the Best Location Preparing for Your New Portable SpaPreparing a Good Foundation Gfci and Wiring Requirements Volt Electrical InstallationTesting the Gfci Breaker Spa Model Gfci Required Wires Required See Configuration InstructionsConfiguring the 6300 Control System Electrical Installation for 11 kW HeaterGfci Wiring Diagram Gas Heater Hook up Preparing for Your New Portable Spa Filling and Powering Up Your Portable Spa Never fill your spa with soft waterOperating Your Spa 5100, 6200 and 6300 Electronic Control OperationLight Setting Filtration CyclesDiagnostic Messages Meaning OptionOperating Your Spa Time Electronic Control OperationInitial Start-up Standard, Economy, Sleep, and StandbyClean up Cycle Preset Filter CyclesSetting the Temperature Lock InvertPeriodic Reminder Messages Diagnostic Messages Meaning Action RequiredMessage Frequency Action Required Or --C Message Meaning Action RequiredDry StbyAuxiliary Panel Configuration Functions Wireless Spa MonitorAuxiliary Control Operation Adjustable Jets Diverter Knobs Air VenturisAromatherapy Adjustable Therapy SystemMulti-Colored Spa Light Operation WaterfallsAlternative Sanitation Options Water Quality MaintenanceCal Spas Clear Water Plan Before You BeginChemical Overview Chemical SafetyBather Load Physical Chemical HazardsChemical Descriptions For use with any Clear Water PlanFor use with the bromine Clear Water Plan For use with the chlorine Clear Water PlanFor use with the Cal Clarity Bromine Generator Day One Monday Traditional Chemical Start Up Bromine Clear Water PlanStart Up Day Two WednesdayDay One Monday Chlorine Clear Water PlanOzonator Clear Water Plan Day Two WednesdayBromine Generator Clear Water Plan Day Two FridayMaintenance Schedule Removing and Reseating the Pillows Cleaning and MaintenanceSpa Cover Draining Your Portable Spa Freeze damage is not covered by your warrantyWinterizing Cold Climate Draining Cleaning the Cover, Shell and Pillows Cleaning and Replacing the Filter Exclusive Bio-Clean Filter CartridgeInserting and Ejecting a CD or Using the Entertainment SystemListening to the Radio Functions for Aeware DVD playerPlaying a Movie Playing a CDRaising and Lowering This applies to the Aeware system onlyUsing the Universal Remote Control Using the iPod Docking Station Programming the Universal Remote ControlDevice Manufacturer Device Type Code Replacement Parts AppendixMNW SXW Neck JET, Quad Blaster Power Storm JET, Swirley Drains ValvesPillows WaterfallsPumps Replacement Cabinet PanelsFilters LED LightsAvalon Series CoversClassic / Legacy Series DIJ-404 93 x Fitness Series Family SeriesAppendix Keeping Fit with your Spa Ultimate Fitness Series Exercise ProgramConnecting the Exercise Equipment Cal Spas Chemicals Warranty Warranty Limitations Warranty SpecificsWarranty Exclusions Locating the product serial number

GFCI specifications

Cal Spas GFCI (Ground Fault Circuit Interrupter) is an essential safety feature incorporated in Cal Spas hot tubs and spas, designed to protect users from electrical shocks and enhance overall safety during relaxation. This advanced technology monitors the electrical current flowing through the spa's components, providing peace of mind for families and individuals enjoying their hydrotherapy experience.

One of the main features of the Cal Spas GFCI is its quick response time. The GFCI continuously measures the current balance between the hot and neutral wires. If it detects an imbalance, potentially caused by faulty wiring or a short circuit, it immediately trips the circuit, cutting off power to the unit within a fraction of a second. This rapid response significantly minimizes the risk of electrical accidents, making it a vital component for any outdoor or indoor spa setup.

Another key characteristic of the Cal Spas GFCI is its user-friendly design. The GFCI outlet is often equipped with a reset button, which allows users to quickly restore power once the issue has been addressed. This feature eliminates the need for complicated maintenance procedures, ensuring that users can enjoy their spa without frequent interruptions.

Incorporating state-of-the-art technology, Cal Spas GFCI is designed to withstand the rigors of outdoor environments. The durable exterior of the GFCI unit protects it from exposure to moisture, debris, and other potential hazards, leading to increased longevity and reliability. Moreover, the GFCI meets the highest safety standards and regulations, providing confidence to consumers that they are investing in a safe product.

Another highlight of the Cal Spas GFCI is its compatibility with a variety of hot tub configurations. This flexibility allows it to work seamlessly with different Cal Spas models, delivering consistent safety features across the entire range. Additionally, installation is straightforward, with many users opting for professional installation to ensure it is set up correctly.

In summary, Cal Spas GFCI enhances the safety of hot tub and spa experiences through its quick trip response, durable design, user-friendly functionalities, and compatibility with various models. By integrating this technology, Cal Spas demonstrates its commitment to providing a safe and enjoyable environment for relaxation and rejuvenation.
Top Page Image Contents