Cal Spas GFCI manual Traditional Chemical Start Up Bromine Clear Water Plan, Day One Monday

Page 27

 

Water Quality Maintenance

Traditional Chemical Start Up

Bromine Clear Water Plan

Prior to filling a spa for the first time, or after a routine draining, you will want to follow this start-up plan to extend water life and performance. If you are following either the Bromine or Chlorine Clear Water Plans, you will notice that both start-up processes are the same with the exception of Step 7. As with all chemical dosages listed in these Clear Water Plans, start-up dosages are intended for 500-gallon spas. Please adjust the chemical dosages to the capacity of your particular spa.

Start Up

1.Clean surface of spa with Cal Spas “Multi-Purpose Cleaner”.

2.Apply a protective coat of Cal Spas “Fast Sheen” to the acrylic surface.

3.Fill spa to proper water level with normal tap water. (Do not use soft water.)

4.Use test strip and balance the spa water.

•Adjust total alkalinity (acceptable range is 80-120ppm).

•Adjust pH if necessary (between 7.2 to 7.8).

5.Pour in 16 oz of Cal Spas “Metal Protector” in the center of the spa.

6.Add either bromine or chlorine (according to your preferred plan).

Bromine: Add 2 oz of Cal Spas “Go Brom” to establish a bromine base.

Add 2 Cal Spas “Bromine Tablets” to bromine floater.

Set floater opening at #2.

Chlorine: Add two tablespoons of Cal Spas “Chorine Granules” to the spa water.

7.Sprinkle 2 oz of Cal Spas “Oxidizer Shock” in the center of the spa and turn on jets for 15 minutes. Leave spa uncovered during this time.

8.Put cover on spa and allow to heat up to desired temperature.

This plan and its chemical dosages are intended for Cal Spas chemicals only. Most chemical manufacturers use different chemical formulas and strengths. Only Cal spas chemicals are specially formulated to provide chemical balance at lower dosages. Always read and follow printed instructions on chemical bottles and packages.

Day One (Monday)

1.Test spa water using “Bromine Test Strips”.

2.Based on the test strip readings:

•Adjust total alkalinity first (acceptable range of

80-120 ppm).

•Adjust the pH if needed (range is between 7.2 to 7.8).

•Add Cal Spas “Bromine Tablets” if needed (do not add more than 2).

•The recommended level of bromine is 3-5 ppm.

3.Add 2 oz of “Stain and Scale Defense”.

4.Remove dirty filter from the spa and rinse off. Allow to dry.

5.Place your extra clean filter cartridge back into the spa.

6.Vacuum debris from the bottom of your spa with the spa vacuum.

Day Two (Wednesday)

1.Test spa water using bromine test strips.

2.Based on the test strip reading, adjust total alkalinity, then the pH if needed.

Day Three (Friday)

1.Test spa water using bromine test strips.

2.Based on the test strip reading:

•Adjust total alkalinity, then the pH if needed.

•Add one bromine tablet (if needed).

3.Add 2 oz of Cal Spas “Oxidizer Shock” to spa. Run spa for 15 minutes with cover off.

4.Replace cover.

2008 Portable Spa Owner’s Manual

Page 25

LTR20081000, Rev. D

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LTR20081000, Rev. D 12/08 Read This First Cleaning and MaintenanceUsing the Entertainment System Water Quality Maintenance AppendixHyperthermia Danger Important Safety InstructionsRead This First Basic Spa InformationRead This First Preparing for Your New Portable Spa Planning the Best LocationPreparing a Good Foundation Volt Electrical Installation Gfci and Wiring RequirementsTesting the Gfci Breaker See Configuration Instructions Spa Model Gfci Required Wires RequiredElectrical Installation for 11 kW Heater Configuring the 6300 Control SystemGfci Wiring Diagram Gas Heater Hook up Preparing for Your New Portable Spa Never fill your spa with soft water Filling and Powering Up Your Portable Spa5100, 6200 and 6300 Electronic Control Operation Operating Your SpaOption Setting Filtration CyclesDiagnostic Messages Meaning LightOperating Your Spa Standard, Economy, Sleep, and Standby Electronic Control OperationInitial Start-up TimeInvert Preset Filter CyclesSetting the Temperature Lock Clean up CycleDiagnostic Messages Meaning Action Required Periodic Reminder MessagesMessage Frequency Action Required Stby Message Meaning Action RequiredDry Or --CWireless Spa Monitor Auxiliary Panel Configuration FunctionsAuxiliary Control Operation Air Venturis Adjustable Jets Diverter KnobsWaterfalls Adjustable Therapy SystemMulti-Colored Spa Light Operation AromatherapyBefore You Begin Water Quality MaintenanceCal Spas Clear Water Plan Alternative Sanitation OptionsPhysical Chemical Hazards Chemical SafetyBather Load Chemical OverviewFor use with any Clear Water Plan Chemical DescriptionsFor use with the chlorine Clear Water Plan For use with the bromine Clear Water PlanFor use with the Cal Clarity Bromine Generator Day Two Wednesday Traditional Chemical Start Up Bromine Clear Water PlanStart Up Day One MondayDay Two Wednesday Chlorine Clear Water PlanOzonator Clear Water Plan Day One MondayDay Two Friday Bromine Generator Clear Water PlanMaintenance Schedule Cleaning and Maintenance Removing and Reseating the PillowsSpa Cover Freeze damage is not covered by your warranty Draining Your Portable SpaWinterizing Cold Climate Draining Cleaning the Cover, Shell and Pillows Exclusive Bio-Clean Filter Cartridge Cleaning and Replacing the FilterFunctions for Aeware DVD player Using the Entertainment SystemListening to the Radio Inserting and Ejecting a CD orThis applies to the Aeware system only Playing a CDRaising and Lowering Playing a MovieUsing the Universal Remote Control Programming the Universal Remote Control Using the iPod Docking StationDevice Manufacturer Device Type Code Appendix Replacement PartsMNW SXW Neck JET, Quad Blaster Power Storm JET, Swirley Waterfalls ValvesPillows DrainsLED Lights Replacement Cabinet PanelsFilters PumpsCovers Avalon SeriesClassic / Legacy Series DIJ-404 93 x Family Series Fitness SeriesAppendix Ultimate Fitness Series Exercise Program Keeping Fit with your SpaConnecting the Exercise Equipment Cal Spas Chemicals Warranty Warranty Specifics Warranty LimitationsWarranty Exclusions Locating the product serial number

GFCI specifications

Cal Spas GFCI (Ground Fault Circuit Interrupter) is an essential safety feature incorporated in Cal Spas hot tubs and spas, designed to protect users from electrical shocks and enhance overall safety during relaxation. This advanced technology monitors the electrical current flowing through the spa's components, providing peace of mind for families and individuals enjoying their hydrotherapy experience.

One of the main features of the Cal Spas GFCI is its quick response time. The GFCI continuously measures the current balance between the hot and neutral wires. If it detects an imbalance, potentially caused by faulty wiring or a short circuit, it immediately trips the circuit, cutting off power to the unit within a fraction of a second. This rapid response significantly minimizes the risk of electrical accidents, making it a vital component for any outdoor or indoor spa setup.

Another key characteristic of the Cal Spas GFCI is its user-friendly design. The GFCI outlet is often equipped with a reset button, which allows users to quickly restore power once the issue has been addressed. This feature eliminates the need for complicated maintenance procedures, ensuring that users can enjoy their spa without frequent interruptions.

Incorporating state-of-the-art technology, Cal Spas GFCI is designed to withstand the rigors of outdoor environments. The durable exterior of the GFCI unit protects it from exposure to moisture, debris, and other potential hazards, leading to increased longevity and reliability. Moreover, the GFCI meets the highest safety standards and regulations, providing confidence to consumers that they are investing in a safe product.

Another highlight of the Cal Spas GFCI is its compatibility with a variety of hot tub configurations. This flexibility allows it to work seamlessly with different Cal Spas models, delivering consistent safety features across the entire range. Additionally, installation is straightforward, with many users opting for professional installation to ensure it is set up correctly.

In summary, Cal Spas GFCI enhances the safety of hot tub and spa experiences through its quick trip response, durable design, user-friendly functionalities, and compatibility with various models. By integrating this technology, Cal Spas demonstrates its commitment to providing a safe and enjoyable environment for relaxation and rejuvenation.
Top Page Image Contents