Cal Spas GFCI manual Chemical Safety, Bather Load, Chemical Overview, Physical Chemical Hazards

Page 24

Water Quality Maintenance

Bather Load

“Bather Load” is the term used to describe the number of people using a spa, combined with the length of usage, and the frequency of usage. All these factors have a great effect on the spa water. The higher the bather load, the more chemicals need to be added and a longer filtration time will be needed.

All versions of the Cal Spas Clear Water Plan are designed for spas with average bather load. (3-4 people, 15 minutes of usage, 3 times a week at 100 degrees) If your bather load exceeds these guidelines, and you experience water quality problems, increase the amount of filtration first, (go to the next higher filtration number) then if water quality is still not adequate, consult the advice of your Cal Spas dealer for additional chemical or system recommendations. Be sure to give them your bather load information.

Chemical Overview

The following information is intended for use with Cal Spas chemicals only. Other brands of chemicals may have similar names and/or usage descriptions but due to manufacturing differences, use of other chemicals can increase the likelihood of under- or over-dosing the spa chemicals. Damage to the spa or spa’s components from improper chemicals or chemical usage is not covered under the spa’s warranty.

Chemical Safety

Failure to follow chemical directions may result in serious injury, sickness, or even death.

Read and follow all printed instructions listed on bottles, packages and in your owner’s manual.

Do not exceed chemical dosages as recommended in the Clear Water Plan, or on chemical bottles and packages. (Most chemical instructions are figured for a 500 gallon spa however, most spas hold less than 500 gallons, consult your owner’s manual for the approximate gallons of your spa)

Never mix chemicals together.

Never change chemical brands or types without completely draining, flushing and thoroughly cleaning the spa and cover first.

Always protect your eyes while introducing chemicals into the spa. Wear protective eyeglasses to prevent powdered chemicals from blowing into the eyes or liquid chemicals from splashing into the eyes.

In the event of overdosing a sanitizing chemical (chorine or bromine), immediately turn off the power to the spa and drain water to a safe and approved area. Refill with fresh water and proceed with the Clear Water Plan start up.

Physical Chemical Hazards

Do not allow chemicals to come in contact with skin, eyes or clothing.

Always wear rubber gloves, protective eye wear and clothing to reduce the risk of chemical contact and irritation.

Remove and wash clothing that may have been exposed to chemical contact prior to wearing them again.

Inhaling or ingesting chemicals will cause serious injury, sickness, or even death.

Do not mix chemicals. Mixing chemicals together can cause dangerous chemical reactions including the release of toxic gas, fire and explosions.

Chemical Storage

Chemicals must be stored completely out of the reach of children in an area that is well vented, cool, and dry. Failure to provide a proper area for chemical storage may result in serious injury, sickness, fire explosion and even death. Do not store your chemicals inside the equipment area of your spa.

Page 22

2008 Portable Spa Owner’s Manual

LTR20081000, Rev. D

Page 23 Page 25
Image 24
Page 23 Page 25
Contents LTR20081000, Rev. D 12/08 Cleaning and Maintenance Using the Entertainment SystemWater Quality Maintenance Appendix Read This FirstImportant Safety Instructions Read This FirstBasic Spa Information Hyperthermia DangerRead This First Preparing for Your New Portable Spa Planning the Best LocationPreparing a Good Foundation Volt Electrical Installation Gfci and Wiring RequirementsTesting the Gfci Breaker Spa Model Gfci Required Wires Required See Configuration InstructionsConfiguring the 6300 Control System Electrical Installation for 11 kW HeaterGfci Wiring Diagram Gas Heater Hook up Preparing for Your New Portable Spa Filling and Powering Up Your Portable Spa Never fill your spa with soft waterOperating Your Spa 5100, 6200 and 6300 Electronic Control OperationSetting Filtration Cycles Diagnostic Messages MeaningLight OptionOperating Your Spa Electronic Control Operation Initial Start-upTime Standard, Economy, Sleep, and StandbyPreset Filter Cycles Setting the Temperature LockClean up Cycle InvertDiagnostic Messages Meaning Action Required Periodic Reminder MessagesMessage Frequency Action Required Message Meaning Action Required DryOr --C StbyWireless Spa Monitor Auxiliary Panel Configuration FunctionsAuxiliary Control Operation Adjustable Jets Diverter Knobs Air VenturisAdjustable Therapy System Multi-Colored Spa Light OperationAromatherapy WaterfallsWater Quality Maintenance Cal Spas Clear Water PlanAlternative Sanitation Options Before You BeginChemical Safety Bather LoadChemical Overview Physical Chemical HazardsChemical Descriptions For use with any Clear Water PlanFor use with the chlorine Clear Water Plan For use with the bromine Clear Water PlanFor use with the Cal Clarity Bromine Generator Traditional Chemical Start Up Bromine Clear Water Plan Start UpDay One Monday Day Two WednesdayChlorine Clear Water Plan Ozonator Clear Water PlanDay One Monday Day Two WednesdayBromine Generator Clear Water Plan Day Two FridayMaintenance Schedule Cleaning and Maintenance Removing and Reseating the PillowsSpa Cover Freeze damage is not covered by your warranty Draining Your Portable SpaWinterizing Cold Climate Draining Cleaning the Cover, Shell and Pillows Cleaning and Replacing the Filter Exclusive Bio-Clean Filter CartridgeUsing the Entertainment System Listening to the RadioInserting and Ejecting a CD or Functions for Aeware DVD playerPlaying a CD Raising and LoweringPlaying a Movie This applies to the Aeware system onlyUsing the Universal Remote Control Programming the Universal Remote Control Using the iPod Docking StationDevice Manufacturer Device Type Code Replacement Parts AppendixMNW SXW Neck JET, Quad Blaster Power Storm JET, Swirley Valves PillowsDrains WaterfallsReplacement Cabinet Panels FiltersPumps LED LightsCovers Avalon SeriesClassic / Legacy Series DIJ-404 93 x Fitness Series Family SeriesAppendix Keeping Fit with your Spa Ultimate Fitness Series Exercise ProgramConnecting the Exercise Equipment Cal Spas Chemicals Warranty Warranty Specifics Warranty LimitationsWarranty Exclusions Locating the product serial number

GFCI specifications

Cal Spas GFCI (Ground Fault Circuit Interrupter) is an essential safety feature incorporated in Cal Spas hot tubs and spas, designed to protect users from electrical shocks and enhance overall safety during relaxation. This advanced technology monitors the electrical current flowing through the spa's components, providing peace of mind for families and individuals enjoying their hydrotherapy experience.

One of the main features of the Cal Spas GFCI is its quick response time. The GFCI continuously measures the current balance between the hot and neutral wires. If it detects an imbalance, potentially caused by faulty wiring or a short circuit, it immediately trips the circuit, cutting off power to the unit within a fraction of a second. This rapid response significantly minimizes the risk of electrical accidents, making it a vital component for any outdoor or indoor spa setup.

Another key characteristic of the Cal Spas GFCI is its user-friendly design. The GFCI outlet is often equipped with a reset button, which allows users to quickly restore power once the issue has been addressed. This feature eliminates the need for complicated maintenance procedures, ensuring that users can enjoy their spa without frequent interruptions.

Incorporating state-of-the-art technology, Cal Spas GFCI is designed to withstand the rigors of outdoor environments. The durable exterior of the GFCI unit protects it from exposure to moisture, debris, and other potential hazards, leading to increased longevity and reliability. Moreover, the GFCI meets the highest safety standards and regulations, providing confidence to consumers that they are investing in a safe product.

Another highlight of the Cal Spas GFCI is its compatibility with a variety of hot tub configurations. This flexibility allows it to work seamlessly with different Cal Spas models, delivering consistent safety features across the entire range. Additionally, installation is straightforward, with many users opting for professional installation to ensure it is set up correctly.

In summary, Cal Spas GFCI enhances the safety of hot tub and spa experiences through its quick trip response, durable design, user-friendly functionalities, and compatibility with various models. By integrating this technology, Cal Spas demonstrates its commitment to providing a safe and enjoyable environment for relaxation and rejuvenation.
Top Page Image Contents