Cal Spas GFCI manual Operating Your Spa, 5100, 6200 and 6300 Electronic Control Operation

Page 13

Operating Your Spa

5100, 6200 and 6300 Electronic Control Operation

Initial Start up

When first powered up, it will automatically revert to Priming mode. A Pr on the topside display will indicate this. Priming mode will be active for less than five minutes at which time the heater will be activated and the water temperature will be maintained in Standard mode. The spa will heat to 100°F (37.5°C) at start up until the set temperature is changed as described below.

Temperature Adjustment

(Range 80°F to 104°F, 26°C to 40°C)

The 6200 and 6300 electronic control panels display the actual water temperature in degrees Fahrenheit. The displayed temperature will only be current after the pump has been running for at least two minutes.

To display the temperature that the spa is set to:

•Press the Temp button. The temperature setting will flash.

•While the display is flashing, each time you press

Temp button, the set temperature will change up or down one degree.

•If the desired temperature is opposite of the direction each press of the button is making, release button, allow display to stop flashing and then press Temp button to change temperature the other direction.

Standard, Economy and Sleep Heating Modes

Your new spa is equipped with a heating feature that gives you complete control of the heating system. When the spa is powered up, it will automatically start in standard heating mode.

•St will light briefly on the main display. In this mode, the heating system will automatically maintain the set spa temperature. In the economy-heating mode, the heating system will only activate during filtration times.

Operating Your Spa

•Ec will display solid if temperature is not current and will alternate with spa temperature if measured temperature is current.

•Economy mode will heat the water to the set temperature while Sleep mode, indicated by a SL on the main display, will also only activate the heater during the filtering cycles but will only heat the water to within 20°F (10°C) of the set temperature. Like Economy mode, SL will display solid when temperature is not current and will alternate with actual temperature when it is current.

NOTE: Displayed temperature will only be current after the pump has been running for at least two minutes.

Switching Modes

•Press Temp button followed by the Light button.

•Press the same sequence to switch to the next mode.

Jets

Press the Jets button:

•Once to activate low speed pump.

•Twice to activate high speed.

•Three times to turn pump off.

2008 Portable Spa Owner’s Manual

Page 11

LTR20081000, Rev. D

Page 12 Page 14
Image 13
Page 12 Page 14
Contents LTR20081000, Rev. D 12/08 Using the Entertainment System Cleaning and MaintenanceWater Quality Maintenance Appendix Read This FirstRead This First Important Safety InstructionsBasic Spa Information Hyperthermia DangerRead This First Planning the Best Location Preparing for Your New Portable SpaPreparing a Good Foundation Gfci and Wiring Requirements Volt Electrical InstallationTesting the Gfci Breaker See Configuration Instructions Spa Model Gfci Required Wires RequiredElectrical Installation for 11 kW Heater Configuring the 6300 Control SystemGfci Wiring Diagram Gas Heater Hook up Preparing for Your New Portable Spa Never fill your spa with soft water Filling and Powering Up Your Portable Spa5100, 6200 and 6300 Electronic Control Operation Operating Your SpaDiagnostic Messages Meaning Setting Filtration CyclesLight OptionOperating Your Spa Initial Start-up Electronic Control OperationTime Standard, Economy, Sleep, and StandbySetting the Temperature Lock Preset Filter CyclesClean up Cycle InvertPeriodic Reminder Messages Diagnostic Messages Meaning Action RequiredMessage Frequency Action Required Dry Message Meaning Action RequiredOr --C StbyAuxiliary Panel Configuration Functions Wireless Spa MonitorAuxiliary Control Operation Air Venturis Adjustable Jets Diverter KnobsMulti-Colored Spa Light Operation Adjustable Therapy SystemAromatherapy WaterfallsCal Spas Clear Water Plan Water Quality MaintenanceAlternative Sanitation Options Before You BeginBather Load Chemical SafetyChemical Overview Physical Chemical HazardsFor use with any Clear Water Plan Chemical DescriptionsFor use with the bromine Clear Water Plan For use with the chlorine Clear Water PlanFor use with the Cal Clarity Bromine Generator Start Up Traditional Chemical Start Up Bromine Clear Water PlanDay One Monday Day Two WednesdayOzonator Clear Water Plan Chlorine Clear Water PlanDay One Monday Day Two WednesdayDay Two Friday Bromine Generator Clear Water PlanMaintenance Schedule Removing and Reseating the Pillows Cleaning and MaintenanceSpa Cover Draining Your Portable Spa Freeze damage is not covered by your warrantyWinterizing Cold Climate Draining Cleaning the Cover, Shell and Pillows Exclusive Bio-Clean Filter Cartridge Cleaning and Replacing the FilterListening to the Radio Using the Entertainment SystemInserting and Ejecting a CD or Functions for Aeware DVD playerRaising and Lowering Playing a CDPlaying a Movie This applies to the Aeware system onlyUsing the Universal Remote Control Using the iPod Docking Station Programming the Universal Remote ControlDevice Manufacturer Device Type Code Appendix Replacement PartsMNW SXW Neck JET, Quad Blaster Power Storm JET, Swirley Pillows ValvesDrains WaterfallsFilters Replacement Cabinet PanelsPumps LED LightsAvalon Series CoversClassic / Legacy Series DIJ-404 93 x Family Series Fitness SeriesAppendix Ultimate Fitness Series Exercise Program Keeping Fit with your SpaConnecting the Exercise Equipment Cal Spas Chemicals Warranty Warranty Limitations Warranty SpecificsWarranty Exclusions Locating the product serial number

GFCI specifications

Cal Spas GFCI (Ground Fault Circuit Interrupter) is an essential safety feature incorporated in Cal Spas hot tubs and spas, designed to protect users from electrical shocks and enhance overall safety during relaxation. This advanced technology monitors the electrical current flowing through the spa's components, providing peace of mind for families and individuals enjoying their hydrotherapy experience.

One of the main features of the Cal Spas GFCI is its quick response time. The GFCI continuously measures the current balance between the hot and neutral wires. If it detects an imbalance, potentially caused by faulty wiring or a short circuit, it immediately trips the circuit, cutting off power to the unit within a fraction of a second. This rapid response significantly minimizes the risk of electrical accidents, making it a vital component for any outdoor or indoor spa setup.

Another key characteristic of the Cal Spas GFCI is its user-friendly design. The GFCI outlet is often equipped with a reset button, which allows users to quickly restore power once the issue has been addressed. This feature eliminates the need for complicated maintenance procedures, ensuring that users can enjoy their spa without frequent interruptions.

Incorporating state-of-the-art technology, Cal Spas GFCI is designed to withstand the rigors of outdoor environments. The durable exterior of the GFCI unit protects it from exposure to moisture, debris, and other potential hazards, leading to increased longevity and reliability. Moreover, the GFCI meets the highest safety standards and regulations, providing confidence to consumers that they are investing in a safe product.

Another highlight of the Cal Spas GFCI is its compatibility with a variety of hot tub configurations. This flexibility allows it to work seamlessly with different Cal Spas models, delivering consistent safety features across the entire range. Additionally, installation is straightforward, with many users opting for professional installation to ensure it is set up correctly.

In summary, Cal Spas GFCI enhances the safety of hot tub and spa experiences through its quick trip response, durable design, user-friendly functionalities, and compatibility with various models. By integrating this technology, Cal Spas demonstrates its commitment to providing a safe and enjoyable environment for relaxation and rejuvenation.
Top Page Image Contents