Cal Spas GFCI manual Read This First, Important Safety Instructions, Basic Spa Information

Page 3

Read This First!

Important Safety Instructions

When installing and using this electrical equipment, always follow basic safety precautions. Following these instructions will help make your first spa session a pleasurable one.

READ AND FOLLOW ALL INSTRUCTIONS

NOTE: A licensed electrician may be required to upgrade your standard receptacle and/or circuit breaker.

DANGER -- RISK OF ACCIDENTAL DROWNING: Do not allow children to be in or around a spa unless a responsible adult supervises them. Keep the spa cover on and locked when not in use. See instructions enclosed with your cover for locking procedures.

DANGER -- RISK OF INJURY: The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the need arise to replace the suction fittings, or the pump, be sure the flow rates are compatible.

DANGER -- RISK OF INJURY: Never operate the spa if the suction fitting or filter baskets are broken or missing.

DANGER -- RISK OF INJURY: Never replace a suction fitting with one that is rated less than the flow rate marked on the original suction fitting.

DANGER -- RISK OF ELECTRIC SHOCK: Install the spa at least 5 feet (1.5 meters) from all metal surfaces. As an alternative, a spa may be installed within 5 feet of metal surfaces if each metal surface is permanently bonded by a minimum #8 AWG solid copper conductor to the outside of the spa’s control box.

DANGER -- RISK OF ELECTRIC SHOCK: Do not permit any external electrical appliances, such as lights, telephones, radios, televisions, and etc., within five feet (1.5 meters) of the spa. Never attempt to operate any electrical device from inside the spa. This does not apply to lights, stereos and televisions that are built into the spa as factory options from Cal Spas™.

WARNING -- RISK OF INJURY

The spa water should never exceed 104˚F (40˚C). Water temperatures between 100˚F (38˚C) and 104˚F (40˚C) are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.

Read This First!

High water temperatures have a high potential for causing fetal damage during pregnancy. Women who are pregnant, or who think they are pregnant, should always check with their physician prior to spa usage.

The use of alcohol, drugs or medication before or during spa use may lead to unconsciousness, with the possibility of drowning.

Persons suffering from obesity, a medical history of heart disease, low or high blood pressure, circulatory system problems or diabetes should consult a physician before using the spa.

Persons using medications should consult a physician before using the spa since some medications may induce drowsiness while others may affect heart rate, blood pressure and circulation.

Hyperthermia Danger

Prolonged exposure to hot air or water can induce hyperthermia. Hyperthermia occurs when the internal temperature of the body reaches a level 3˚F to 6˚F above the normal body temperature of 98.6˚F (or 2˚C to 4˚C above 37˚C). While hyperthermia has many health benefits, it is important not to allow your body’s core temperature to rise above 103˚F (39.5˚C). Symptoms of excessive hyperthermia include dizziness, lethargy, drowsiness and fainting. The effects of excessive hyperthermia may include:

•Failure to perceive heat

•Failure to recognize the need to exit spa or hot tub

•Unawareness of impending hazard

•Fetal damage in pregnant women

•Physical inability to exit the spa

•Unconsciousness

WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia.

Basic Spa Information

The following operating and maintenance instructions are very important and must be followed carefully. With the proper care and maintenance, your spa will provide you with years of satisfaction and performance.

Do not be afraid to push buttons or turn knobs to learn about your new spa, as it is built with quality materials and excellent craftsmanship.

Your new spa has been engineered with a high-powered water pump that pushes water through various therapy

2008 Portable Spa Owner’s Manual

Page 1

LTR20081000, Rev. D

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LTR20081000, Rev. D 12/08 Read This First Cleaning and MaintenanceUsing the Entertainment System Water Quality Maintenance AppendixHyperthermia Danger Important Safety InstructionsRead This First Basic Spa InformationRead This First Preparing for Your New Portable Spa Planning the Best LocationPreparing a Good Foundation Volt Electrical Installation Gfci and Wiring RequirementsTesting the Gfci Breaker See Configuration Instructions Spa Model Gfci Required Wires RequiredElectrical Installation for 11 kW Heater Configuring the 6300 Control SystemGfci Wiring Diagram Gas Heater Hook up Preparing for Your New Portable Spa Never fill your spa with soft water Filling and Powering Up Your Portable Spa5100, 6200 and 6300 Electronic Control Operation Operating Your SpaOption Setting Filtration CyclesDiagnostic Messages Meaning LightOperating Your Spa Standard, Economy, Sleep, and Standby Electronic Control OperationInitial Start-up TimeInvert Preset Filter CyclesSetting the Temperature Lock Clean up CycleDiagnostic Messages Meaning Action Required Periodic Reminder MessagesMessage Frequency Action Required Stby Message Meaning Action RequiredDry Or --CWireless Spa Monitor Auxiliary Panel Configuration FunctionsAuxiliary Control Operation Air Venturis Adjustable Jets Diverter KnobsWaterfalls Adjustable Therapy SystemMulti-Colored Spa Light Operation AromatherapyBefore You Begin Water Quality MaintenanceCal Spas Clear Water Plan Alternative Sanitation OptionsPhysical Chemical Hazards Chemical SafetyBather Load Chemical OverviewFor use with any Clear Water Plan Chemical DescriptionsFor use with the chlorine Clear Water Plan For use with the bromine Clear Water PlanFor use with the Cal Clarity Bromine Generator Day Two Wednesday Traditional Chemical Start Up Bromine Clear Water PlanStart Up Day One MondayDay Two Wednesday Chlorine Clear Water PlanOzonator Clear Water Plan Day One MondayDay Two Friday Bromine Generator Clear Water PlanMaintenance Schedule Cleaning and Maintenance Removing and Reseating the PillowsSpa Cover Freeze damage is not covered by your warranty Draining Your Portable SpaWinterizing Cold Climate Draining Cleaning the Cover, Shell and Pillows Exclusive Bio-Clean Filter Cartridge Cleaning and Replacing the FilterFunctions for Aeware DVD player Using the Entertainment SystemListening to the Radio Inserting and Ejecting a CD orThis applies to the Aeware system only Playing a CDRaising and Lowering Playing a MovieUsing the Universal Remote Control Programming the Universal Remote Control Using the iPod Docking StationDevice Manufacturer Device Type Code Appendix Replacement PartsMNW SXW Neck JET, Quad Blaster Power Storm JET, Swirley Waterfalls ValvesPillows DrainsLED Lights Replacement Cabinet PanelsFilters PumpsCovers Avalon SeriesClassic / Legacy Series DIJ-404 93 x Family Series Fitness SeriesAppendix Ultimate Fitness Series Exercise Program Keeping Fit with your SpaConnecting the Exercise Equipment Cal Spas Chemicals Warranty Warranty Specifics Warranty LimitationsWarranty Exclusions Locating the product serial number

GFCI specifications

Cal Spas GFCI (Ground Fault Circuit Interrupter) is an essential safety feature incorporated in Cal Spas hot tubs and spas, designed to protect users from electrical shocks and enhance overall safety during relaxation. This advanced technology monitors the electrical current flowing through the spa's components, providing peace of mind for families and individuals enjoying their hydrotherapy experience.

One of the main features of the Cal Spas GFCI is its quick response time. The GFCI continuously measures the current balance between the hot and neutral wires. If it detects an imbalance, potentially caused by faulty wiring or a short circuit, it immediately trips the circuit, cutting off power to the unit within a fraction of a second. This rapid response significantly minimizes the risk of electrical accidents, making it a vital component for any outdoor or indoor spa setup.

Another key characteristic of the Cal Spas GFCI is its user-friendly design. The GFCI outlet is often equipped with a reset button, which allows users to quickly restore power once the issue has been addressed. This feature eliminates the need for complicated maintenance procedures, ensuring that users can enjoy their spa without frequent interruptions.

Incorporating state-of-the-art technology, Cal Spas GFCI is designed to withstand the rigors of outdoor environments. The durable exterior of the GFCI unit protects it from exposure to moisture, debris, and other potential hazards, leading to increased longevity and reliability. Moreover, the GFCI meets the highest safety standards and regulations, providing confidence to consumers that they are investing in a safe product.

Another highlight of the Cal Spas GFCI is its compatibility with a variety of hot tub configurations. This flexibility allows it to work seamlessly with different Cal Spas models, delivering consistent safety features across the entire range. Additionally, installation is straightforward, with many users opting for professional installation to ensure it is set up correctly.

In summary, Cal Spas GFCI enhances the safety of hot tub and spa experiences through its quick trip response, durable design, user-friendly functionalities, and compatibility with various models. By integrating this technology, Cal Spas demonstrates its commitment to providing a safe and enjoyable environment for relaxation and rejuvenation.
Top Page Image Contents