Exmark 920 manual Dimensions, Hydrostatic Ground Drive System, Tires & Wheels, Cutting Deck

Page 16

Specifications

armrests, integral safety switch, and seat vibration isolation system.

Optional seat accessories for units with standard seats:

Custom ride suspension system to enhance Standard Seat. Adds approximately 3 inches (7.6 cm) to seat height.

Deluxe suspension seat with high back, (dampened, adjustable spring suspension), armrests, and integral safety switch. Adds approximately 1/2 inch (1.3 cm) to seat height.

Mounting: Adjustable fore and aft on seat tracks.

Armrests: Molded flip-up armrests.

Seat Safety Switch:

Integrated seat switch. Time delay seat switch eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

Two unitized hydrostatic transmissions: Hydro Gear ZT3100

Hydraulic Oil Type: Exmark Premium Hydro Oil.

Hydraulic Oil Capacity: 77 oz (2.3 L) per side

Hydraulic Filter: P/N 109-3321

Speeds:

0-8 mph (12.9 km/hr) forward.

0-5 mph (8.0 km/hr) reverse.

Drive wheel release valves allow machine to be moved when engine is not running.

Tires & Wheels

 

Drive

Front Caster

 

Pneumatic (Air

Pneumatic (Air

 

filled)

filled)

Quantity

2

2

 

 

 

Tread

Turf Master

Smooth

 

 

 

Size

22 x 9.50-12

13 x 5.00-6

Ply Rating

4

4

Pressure

13 psi (90 kPa)

13 psi (90 kPa)

 

 

 

Cutting Deck

Cutting Width:

44 inch Deck: (111.8 cm)

48 inch Deck: (121.9 cm)

52 inch Deck: (132.1 cm)

Discharge: Side

Blade Size:

44 inch Deck: 22.25 inches (56.5 cm) – (2 ea.)

48 inch Deck: 16.25 inches (41.3 cm) – (3 ea.)

52 inch Deck: 18.00 inches (45.7 cm) – (3 ea.)

Blade Spindles: Solid steel spindles with .98 inch (25 mm) I.D. bearings.

Deck Drive: “B” Section belt with self-tensioning idler.

Electric clutch: 175 ft-lb Mag Stop

Deck: Full floating deck is attached to out-front support frame. Anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

44 inch Deck: 2 anti-scalp rollers

48 inch Deck: 3 anti-scalp rollers

52 inch Deck: 3 anti-scalp rollers

Deck Depth:

44 inch Deck: 5.0 inches (12.7 cm)

48 inch Deck: 5.0 inches (12.7 cm)

52 inch Deck: 5.0 inches (12.7 cm)

Cutting Height Adjustment:

Foot activated lever is used to adjust the cutting height from 1 1/2 inch (3.8 cm) to 5 inches (12.7 cm) in 1/4 inch (6.4 mm) increments.

Mulching Kit: Optional.

Dimensions

Overall Width:

 

44 inch

48 inch

52 inch

 

Deck

Deck

Deck

Without

45.8 inches

45.8 inches

45.8 inches

Deck

(116.3 cm)

(116.3 cm)

(116.3 cm)

Deflector

48.2 inches

50.7 inches

54.2 inches

Up

(122.4 cm)

(128.8 cm)

(137.7 cm)

Deflector

56.4 inches

59.5 inches

64.3 inches

Down

(143.3 cm)

(151.1 cm)

(163.3 cm)

16

Image 16
Contents Pioneer S-SERIES California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices TrainingSafety Operation Slope OperationUsing the Rollover Protection System Rops Maintenance and StorageSafety Safety Safety and Instructional Decals 109-6014 116-1119 107-2102 116-1121 116-3303 116-4465 116-4430 Model Numbers SpecificationsSystems Dimensions Hydrostatic Ground Drive SystemTires & Wheels Cutting DeckTorque Requirements Product Overview OperationControls Motion Control LeversIgnition Switch Fuel Shut-Off Valve Throttle ControlBrake Lever Hour MeterPTO Engagement Switch Drive Wheel Release ValvesPre-Start Operating InstructionsDeck Lift Pedal Transport LockStarting the Engine Open the Fuel Shut-Off ValveEngaging the PTO Stopping the Engine Disengaging the PTODriving the Machine Adjusting the Cutting Height Adjusting the Anti-Scalp RollersTransporting a Unit TransportingLoading a Unit Operation Maintenance Recommended Maintenance SchedulesRecommended Jump Starting Procedure Check Battery ChargeCheck Engine Oil Level Do Not jump start a weak battery if these conditions exist Check Mower BladesCheck Safety Interlock System Service DealerService Air Cleaner Check Rollover Protections Systems Roll Bar KnobsCheck Seat Belt Check for Loose HardwareCheck Hydraulic Oil Level Lubricate Grease FittingsCheck Tire Pressures Lubricate Caster Wheel HubsChange Fuel Filter Check Spark PlugsChange Hydraulic System Filter and Fluid Check Spark Arrester if equipped Thread Locking Adhesives Copper-Based Anti-seizeDielectric Grease Deck LevelingAdjusting the Blade Slope Inch DeckPump Drive Belt Tension Adjusting the Parking BrakeDeck Belt Tension Full Forward Tracking Adjustment Motion Control Handle AdjustmentMotion Control Linkage Adjustment Adjusting the Seat Ride Suspension Electric Clutch Adjustment Removing the ShimRemove Engine Shrouds and Clean Cooling Fins Clean Engine and Exhaust System AreaClean Hydro Fan Cooling Fins Clean Debris From Machine Clean Grass Build-Up Under DeckBattery Disposal Waste DisposalTroubleshooting Problem Possible Cause Corrective ActionSee Drive Wheel Release Valves section Schematics Electrical DiagramElectrical Logic Schematic Pioneer S-Series Turf Equipment Page Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 52 pages 57.34 Kb Manual 60 pages 42.39 Kb Manual 60 pages 43.2 Kb Manual 64 pages 37.72 Kb

920 specifications

The Exmark 920 is an exceptional piece of equipment tailored for professionals and enthusiasts alike. Designed with an emphasis on performance and reliability, this mower embodies the pinnacle of lawn care technology. Known for its robust construction, the Exmark 920 is equipped with a powerful engine, ensuring efficient and effective mowing even in demanding conditions.

One of the standout features of the Exmark 920 is its cutting deck. With a 52-inch or 60-inch mower deck option, it allows users to cover a large mowing area quickly. The deck is crafted from high-strength steel, providing durability and longevity while maintaining a lightweight design that enhances maneuverability. Innovative blade design promotes superior airflow for an even cut, preventing clumping and ensuring a polished finish across various grass types.

The Exmark 920 utilizes advanced technology, including the innovative RED Technology, which enhances engine performance by optimizing power consumption. This results in reduced fuel consumption while maintaining the required power output for demanding tasks. Additionally, the mower’s intuitive controls include a user-friendly interface, allowing for easy adjustments and settings, catering to the varying needs of different lawn types and conditions.

Another notable feature of the Exmark 920 is its all-day comfort design. With an ergonomic seat and advanced suspension system, operators can tackle long mowing sessions without discomfort. The padded seat is adjustable, providing maximum support to minimize fatigue, while the suspension system absorbs bumps and uneven terrain for a smoother ride.

Furthermore, the Exmark 920 prioritizes serviceability. Easy access points for maintenance and a well-designed layout ensure that routine tasks, such as oil changes and blade replacements, can be completed efficiently. The model also comes equipped with LED headlights for improved visibility during early morning or late evening mowing.

In summary, the Exmark 920 is a sophisticated mower combining power, advanced technology, and design for comfort and utility. Its high-performance engine, durable cutting deck, user-friendly controls, and serviceable layout make it an ideal choice for anyone seeking to achieve a well-manicured lawn with professional results. Whether for commercial or residential use, the Exmark 920 stands out as a leading option in the market, enabling users to tackle any mowing challenge with confidence and ease.