Exmark MHP3614KA, MHP3615KC, MHP3615KA, MHP4816BV, MHP4815KC

5.1.6Check Brake and Wheel Drive Linkage Adjustment Service Interval: Daily

Refer to Section 3.11. Note any bent linkage or hardware which may need servicing or replacing.

5.1.7Service pre-cleaner element and air cleaner. Service Interval: See Engine Owner's Manual

5.1.8Change engine oil.

Service Interval: See Engine Owner's Manual

NOTE: Change oil after first five (5) hours of operation. Follow engine manufacturers recommendations for future oil changes.

a)Disengage blade clutch.

b)Stop engine and remove spark plug wire(s).

c)Drain oil while engine is warm from operation.

d)Remove the oil drain plug from the right hand side of the engine. Allow oil to drain, then replace drain plug.

e)Replace the oil filter as per Engine Owner's Manual. Clean around oil filter and unscrew filter to remove. Before reinstalling new filter, apply a thin coating of oil on the surface of the rubber seal. Turn filter clockwise until rubber seal contacts the filter adapter then tighten filter an additional 2/3 to 3/4 turn.

f)Clean around oil fill cap and remove cap. Fill to the specified capacity and replace cap. Use oil as specified in Engine Owners Manual. Do not overfill.

g)Start the engine and check for leaks. Stop engine and recheck oil levels.

5.1.9Check grease level, input and output shaft bearing wear on Peerless Transmission. (Replace gearbox grease yearly)

Service Interval: 160 hrs.

a)Stop engine and remove spark plug wire(s).

b)Place drive levers and neutral lock/park brake latches in the neutral lock position.

c)Remove shifter lever from top of transmission.

d)Remove shifter plate from top of transmission and the two leads from the neutral start switch.

e)Release the tension on the transmission belt.

f)Check for side play caused by bearing wear on the input and out put shafts of the transmission. Replace bearings if necessary.

g)Remove the six bolts that fasten the upper case to the lower case and carefully remove the upper case half.

h)Check the grease level in the lower case. The grease level should be approximately 1-1/2” to 1-3/4” from the gearbox bottom. If necessary, fill to proper level with Peerless grease (Part No. 788067)

i)Reinstall upper case half and fasten in place with six bolts previously removed.

j)Reinstall all parts removed in Steps c and d. Install drive belt and adjust tension as stated in Section 5.2.5.

- 24 -

MHP4815KC, MHP4816BV, MHP3615KA, MHP3615KC, Mhp4816bv, Mhp5216bv, Mhp3614ka, Mhp4814ka, Mhp3615kc, Mhp4815kc, Mhp4817ka, Mhp5217ka, Mhp4815ka, Mhp3615ka specifications

Exmark has long been a leader in the landscaping and turf care industry, and its MHP series of mowers epitomizes dedication to performance, efficiency, and durability. This lineup of models, including MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, MHP5216BV, and others, has garnered attention for its innovative features and robust design.

The MHP4815KC and MHP3615KC are equipped with powerful engines, ensuring that they can handle a variety of terrain and grass types with ease. With reliable cutting decks, these machines deliver a clean, precise cut that leaves lawns looking immaculate. Their advanced blade systems are designed for optimal airflow, which enhances cutting efficiency and finish.

The MHP3614KA and MHP4816BV models showcase versatility, allowing users to customize their mowing experience. These mowers come with various deck sizes and cutting heights, providing the flexibility needed for different mowing conditions. The MHP5216BV stands out with its rugged construction, tailored for heavy-duty use, making it an ideal choice for professional landscapers and homeowners with large yards.

Integrated with modern technologies, these mowers are designed for user comfort and ease of operation. The ergonomic design of the handles, combined with padded grips, reduces user fatigue during long mowing sessions. Additionally, many models feature intuitive control systems that allow for easy maneuverability, further enhancing the mowing experience.

Safety is paramount in the MHP series. Many of these models include features such as automatic blade shut-off when the operator leaves the seat, ensuring that accidents are minimised. The robust frame construction also contributes significantly to the durability and longevity of the mowers, standing up well to the rigors of regular use.

In summary, the Exmark MHP series, including models like MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, and others, provides top-tier performance, versatility, and safety features. With their powerful engines, advanced cutting technologies, ergonomic designs, and a commitment to user safety, these mowers are truly an investment worth considering for both avid gardeners and professional landscapers alike.