Exmark MHP4816BV, MHP3614KA, MHP3615KC, MHP3615KA, MHP4815KC manual Maintenance and Storage

Page 9

1.4.5Stop the blades when crossing surfaces other than grass; and when transporting the mower to and from the area to be mowed.

1.4.6Never operate the mower with defective guards, shields, or covers. Always have safety shields, guards, switches, and other devices in place and in proper working condition.

1.4.7Do Not change the engine governor settings or over-speed the engine. Operating an engine at excessive speed may increase the hazard of personal injury.

1.4.8Place transmission in neutral, disengage blade drive before starting engine.

1.4.9Start the engine carefully with feet well away from blades.

1.4.10Keep hands, feet and clothing away from rotating parts while the mower is being operated.

1.4.11Stop the engine and remove spark plug wire(s) or ignition key:

•Before checking, cleaning or working on the mower.

•After striking a foreign object (inspect the mower for damage and make repairs before restarting and operating the mower).

1.4.12Stop the engine:

•Before clearing blockages.

•Whenever you leave the mower.

•Before removing the grass catcher.

•Before refueling.

•Before making height adjustments.

1.4.13Before stopping the engine, return the throttle control to the idle position for 30 seconds to allow the engine to cool down.

1.4.14The fuel system is provided with a shut-off valve. The fuel shut-off valve is used to shut off the fuel when:

•The machine will not be used for a few days.

•During transport to and from the job.

•When parking inside a building.

1.4.15This mower was designed for one operator only. Keep all others away from mower during operation.

1.4.16Do Not mow without the grass deflector or entire grass collection system in place and in proper working condition.

1.5MAINTENANCE AND STORAGE

1.5.1For engine maintenance, follow the engine manufacture’s recommendations precisely as stated in the engine manual.

1.5.2When making adjustments while the engine is running, such as carburetor and motion control linkage adjustments, stand to one side and keep clear of moving/rotating components, such as engine screen, drive belts and sheaves. Do Not wear loose fitting clothing or jewelry that could get tangled in moving/rotating components..

1.5.3Keep engine and engine area free from accumulation of grass, leaves, excessive grease or oil and other debris which can accumulate in these areas. These materials can become combustible and may result in a fire.

1.5.4Store fuel in a container specifically designed for this purpose in a cool, dry place.

- 4 -

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Specifications Table of Contents SafetyAssembly Instructions Maintenance & AdjustmentsYour Safety is Involved SafetySafety Alert Symbol TrainingPotential Hazard Operation Maintenance and Storage Riding Attachments Safety SignsPage Page Specifications Dimensions Wheel Drive SystemTires Assembly Instructions Torque RequirementsUpper Handle Mounting 15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UP For Kohler engines This Clearance should be Equal Shifter Lever To Transmission Blade Engagement LinkageLever and ROD Adjustment This Clearance should be EqualNeutral Lock Lever Clearance Drive Lever Hardware Location Operation InstructionsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation Pre-Start Operating Instructions Potential Hazard Rotating blades under the mower deck are dangerous Maintenance & Adjustments Periodic MaintenanceTransporting Do not Overfill Blade Bolt Installation Page Fitting Initial Quantity Service Locations Pump Interval Grease Lubrication ChartPivot Point Spray Lubricant ChartAdjustments Roller may result Drive Belt Tension Adjustment Positions Mower Pulling Left or Right Trouble ShootingMower Cuts Unevenly Engine will not StartEngine Troubleshooting Engine Troubleshooting TableProblem Wiring Diagram Page Warranty Page Service Record Page Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care

MHP4815KC, MHP4816BV, MHP3615KA, MHP3615KC, Mhp4816bv, Mhp5216bv, Mhp3614ka, Mhp4814ka, Mhp3615kc, Mhp4815kc, Mhp4817ka, Mhp5217ka, Mhp4815ka, Mhp3615ka specifications

Exmark has long been a leader in the landscaping and turf care industry, and its MHP series of mowers epitomizes dedication to performance, efficiency, and durability. This lineup of models, including MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, MHP5216BV, and others, has garnered attention for its innovative features and robust design.

The MHP4815KC and MHP3615KC are equipped with powerful engines, ensuring that they can handle a variety of terrain and grass types with ease. With reliable cutting decks, these machines deliver a clean, precise cut that leaves lawns looking immaculate. Their advanced blade systems are designed for optimal airflow, which enhances cutting efficiency and finish.

The MHP3614KA and MHP4816BV models showcase versatility, allowing users to customize their mowing experience. These mowers come with various deck sizes and cutting heights, providing the flexibility needed for different mowing conditions. The MHP5216BV stands out with its rugged construction, tailored for heavy-duty use, making it an ideal choice for professional landscapers and homeowners with large yards.

Integrated with modern technologies, these mowers are designed for user comfort and ease of operation. The ergonomic design of the handles, combined with padded grips, reduces user fatigue during long mowing sessions. Additionally, many models feature intuitive control systems that allow for easy maneuverability, further enhancing the mowing experience.

Safety is paramount in the MHP series. Many of these models include features such as automatic blade shut-off when the operator leaves the seat, ensuring that accidents are minimised. The robust frame construction also contributes significantly to the durability and longevity of the mowers, standing up well to the rigors of regular use.

In summary, the Exmark MHP series, including models like MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, and others, provides top-tier performance, versatility, and safety features. With their powerful engines, advanced cutting technologies, ergonomic designs, and a commitment to user safety, these mowers are truly an investment worth considering for both avid gardeners and professional landscapers alike.
Top Page Image Contents