Exmark MHP3615KC, MHP3614KA, MHP3615KA, MHP4816BV, MHP4815KC manual Specifications

Page 13

PART NO. 413206

PART NO. 413327

LOCATION: Top of Cutter Deck, Under

LOCATION: Top of Cutter Deck, Under

Center Belt Shield (36”)

Belt Shield (48” & 52” Decks)

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 150,000 – 189,999: MHP4816BV; MHP5216BV

Serial Nos. 150,000 – 219,999: MHP3614KA; MHP4814KA

Serial Nos. 150,000 & Higher: MHP3615KC; MHP4815KC

Serial Nos. 160,000 & Higher: MHP4817KA; MHP5217KA

Serial Nos. 190,000 & Higher: MHP4815KA

Serial Nos. 220,000 & Higher: MHP3615KA

2.2ENGINE

2.2.1Engine Specifications: See your Engine Owner's Manual.

2.2.23600 RPM (No Load).

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal.(18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and blade clutch disengaged to start engine. Release of OPC levers will cause the engine to stop if transmission is not in neutral and/or blade clutch is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking and neutral to each drive wheel for moving, stopping and power turning. Parking brakes are engaged by locking drive control levers in the “brake” position.

2.6TRANSMISSION:

2.6.1Peerless 700-061, five speeds forward and one reverse.

2.6.2Speed Range:

1st 2.0 mph (3.22 km/h) 4th 4.1 mph (6.60 km/h) 2nd 2.7 mph (4.35 km/h) 5th 6.2 mph (9.98 km/h) 3rd 3.5 mph (5.63 km/h) Rev. 3.1 mph (4.99 km/h)

- 8 -

Image 13
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Specifications Table of Contents SafetyAssembly Instructions Maintenance & AdjustmentsYour Safety is Involved SafetySafety Alert Symbol TrainingPotential Hazard Operation Maintenance and Storage Riding Attachments Safety SignsPage Page Specifications Wheel Drive System DimensionsTires Torque Requirements Assembly InstructionsUpper Handle Mounting 15 & 17 HP Kawasaki Speed Control Throttle Cable HOOK-UP For Kohler engines This Clearance should be Equal Shifter Lever To Transmission Blade Engagement LinkageThis Clearance should be Equal Lever and ROD AdjustmentNeutral Lock Lever Clearance Drive Lever Hardware Location Operation InstructionsDrive LEVER, Neutral LOCK/PARK Brake Latch Operation Pre-Start Operating Instructions Potential Hazard Rotating blades under the mower deck are dangerous Periodic Maintenance Maintenance & AdjustmentsTransporting Do not Overfill Blade Bolt Installation Page Fitting Initial Quantity Service Locations Pump Interval Grease Lubrication ChartPivot Point Spray Lubricant ChartAdjustments Roller may result Drive Belt Tension Adjustment Positions Mower Pulling Left or Right Trouble ShootingMower Cuts Unevenly Engine will not StartEngine Troubleshooting Table Engine TroubleshootingProblem Wiring Diagram Page Warranty Page Service Record Page Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care

MHP4815KC, MHP4816BV, MHP3615KA, MHP3615KC, Mhp4816bv, Mhp5216bv, Mhp3614ka, Mhp4814ka, Mhp3615kc, Mhp4815kc, Mhp4817ka, Mhp5217ka, Mhp4815ka, Mhp3615ka specifications

Exmark has long been a leader in the landscaping and turf care industry, and its MHP series of mowers epitomizes dedication to performance, efficiency, and durability. This lineup of models, including MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, MHP5216BV, and others, has garnered attention for its innovative features and robust design.

The MHP4815KC and MHP3615KC are equipped with powerful engines, ensuring that they can handle a variety of terrain and grass types with ease. With reliable cutting decks, these machines deliver a clean, precise cut that leaves lawns looking immaculate. Their advanced blade systems are designed for optimal airflow, which enhances cutting efficiency and finish.

The MHP3614KA and MHP4816BV models showcase versatility, allowing users to customize their mowing experience. These mowers come with various deck sizes and cutting heights, providing the flexibility needed for different mowing conditions. The MHP5216BV stands out with its rugged construction, tailored for heavy-duty use, making it an ideal choice for professional landscapers and homeowners with large yards.

Integrated with modern technologies, these mowers are designed for user comfort and ease of operation. The ergonomic design of the handles, combined with padded grips, reduces user fatigue during long mowing sessions. Additionally, many models feature intuitive control systems that allow for easy maneuverability, further enhancing the mowing experience.

Safety is paramount in the MHP series. Many of these models include features such as automatic blade shut-off when the operator leaves the seat, ensuring that accidents are minimised. The robust frame construction also contributes significantly to the durability and longevity of the mowers, standing up well to the rigors of regular use.

In summary, the Exmark MHP series, including models like MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, and others, provides top-tier performance, versatility, and safety features. With their powerful engines, advanced cutting technologies, ergonomic designs, and a commitment to user safety, these mowers are truly an investment worth considering for both avid gardeners and professional landscapers alike.