Exmark Lazer Z manual Do not over tighten, Upper Handle Mounting

Page 14

3.5Install casters to front of deck using appropriate hardware from the bolt bag (eight 3/8 x 3/4" bolts and eight 3/8" whizlock nuts); tightening the lower four bolts first, then the top four.

3.6Loosen the 5/16" hardware at the two (2) discharge deflector hinge points so that the deflector is snug, but can be moved up and down freely.

3.7Mount the fuel tank on the tank support.

Apply retaining adhesive Fel-Pro Pro-Lock ‘Retaining Type I or Retaining II’ or Loctite RC 609 or 680 on the two threaded studs from the bolt bag and install into the two left holes underneath fuel tank. Install the fuel tank on top of the fuel tank support with the studs going through the slots in the support. Install two 5/16 x 3/4 screws with a 5/16” flatwasher and 5/16” lockwasher into the threaded holes in the right side of the fuel tank. Do not over tighten. Place

a 5/16” flatwasher, then a spring, and a 5/16 nyloc nut over each of the studs. Completely tighten nyloc nut then back off a 1/2 turn. This will allow for normal fuel expansion and contraction with changes in temperature and fuel levels.

Do not over tighten.

3.8Install Handle Assembly

Position the lower end of the handle assembly on the outside of the upper rear section of the fuel tank & handle support. Install one 3/8-16 x 1" bolt (from the outside in) in the upper hole on each side of the handle.

Loosely secure each screw with a 3/8" nyloc nut. The handle can now be pivoted to allow positioning in one of the three holes allowing various adjustments for operator comfort (See Figures 1 & 2). Once a proper position is found, install one 3/8 x 1" bolt in the bottom mounting holes on each side of the handle. Secure each bolt with a 3/8" nyloc nut. Tighten all hardware.

FIG. 1

UPPER HANDLE MOUNTING

IMPORTANT: If the mower has been completely assembled and the handle position is changed, it will be necessary to readjust the drive and brake linkage.

- 9 -

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page R N in G Exmark Parts PLUS Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingOperation Give complete, undivided attention to the job at handPage Riding Attachments Maintenance and StorageSafety Signs KAWASAKI,KOHLER & 10.5 HP B&S Engine SpecificationsModel Number Fuel SystemTransmission Safety Interlock SystemSTEERING/BRAKE Control Wheel Drive SystemTorque Requirements Assembly InstructionsDimensions Do not over tighten Upper Handle MountingUpper Handle Height Adjustment Kohler Speed Control Throttle Cable HOOK-UPKawasaki Speed Control Throttle Cable HOOK-UP 10.5 hp Speed Control Throttle Cable HOOK-UPFor B&S 8.5 hp Engines Nyloc nut See . Torque the 3/8 nut to 35 ft. lbs N⋅mLever and ROD Adjustment This Clearance should be Equal Shifter Lever To TransmissionNeutral Lock Lever Clearance Drive Lever Hardware LocationFor locations and grease amounts Operation InstructionsControls Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Kawasaki,Kohler, and B&S 10.5 hp EnginesPRE-START 8.5 hp EnginesOperating Instructions Blade Engagement Transporting Maintenance and AdjustmentsPeriodic Maintenance Blade Bolt Installation Service Interval DailyCheck Brake and Wheel Drive Linkage Adjustment Service Interval 40 hrs Service Interval 160 hrsFitting Initial Fitting Quantity Service Locations Lubrication ChartService Interval Refer to Chart IntervalPivot Points Spray Lubricant ChartService Interval Adjustments Caster Height Adjustment Axle Height Adjustment Axle NO. of Spacers Number of 1/4 Blade Spacers Below SpindleCutter Deck Belt Adjustment Underneath engine deck Belt Guide LocationWheel drive spring tension adjustment Drive Belt Tension Adjustment PositionsMower Pulling Left or Right Trouble ShootingBlades do not Stop When Disengaged Mower Cuts UnevenlyMower Deck Belt Routing Engine TroubleshootingEngine Troubleshooting Table 36 Mower DeckWiring Diagrams Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care
Related manuals
Manual 44 pages 58.72 Kb

Lazer Z specifications

The Exmark Lazer Z is a premium zero-turn mower known for its exceptional performance, durability, and advanced features, making it a top choice for both homeowners and professional landscapers. With its innovative engineering and attention to detail, the Lazer Z series has earned a strong reputation in the lawn care industry.

One of the primary features of the Exmark Lazer Z is its powerful engine options. Customers can choose from a variety of engines, including reliable Kohler and Kawasaki models, ensuring that every user can find the perfect fit for their mowing needs. These engines offer impressive horsepower, enabling the Lazer Z to handle even the toughest mowing conditions with ease.

The Lazer Z's cutting deck is another standout feature. Available in several sizes, typically ranging from 48 to 72 inches, the Aerodynamic design of the UltraCut cutting deck allows for efficient grass flow, providing a clean and even cut. The deck is made from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the deck height can be easily adjusted, giving users the flexibility to achieve their desired grass length.

The patented Red Technology is integrated into the Lazer Z, providing advanced features like the Smart Control, which optimizes performance in real time. This technology enhances fuel efficiency and reduces overall operating costs, making it an eco-friendly choice in a competitive market. Alongside this, the Lazer Z is designed with a responsive and intuitive control system that allows for precise maneuvering, making it easier to navigate tight spaces and complex landscapes.

Comfort is also at the forefront of the Lazer Z's design. Its ergonomically designed seat, equipped with high back support and adjustable armrests, ensures that operators remain comfortable during long mowing sessions. The Lap Bar control system offers smooth and effortless steering, enhancing user experience and reducing fatigue.

In terms of maintenance, the Exmark Lazer Z is designed to facilitate easy access to critical components. This allows for quick maintenance and service, ensuring that the mower remains in peak condition over its lifespan. Additionally, with a durable frame and robust construction, the Lazer Z is built to withstand the rigors of daily use.

Overall, the Exmark Lazer Z combines power, precision, and comfort, making it a preferred choice for anyone looking to achieve professional-quality results on their lawn. Whether for residential or commercial use, the Lazer Z delivers unmatched performance to meet a variety of mowing needs.
Top Page Image Contents