Exmark Lazer Z Wheel drive spring tension adjustment, Drive Belt Tension Adjustment Positions

Page 36

turn setscrew all the way in then back out 1-1/2 turns.

IMPORTANT: Screwing setscrew in too far will prevent the transmission from shifting.

5.2.12Blade safety switch.

a)Stop engine and remove spark plug wire(s).

b)With the blades disengaged and the bellcrank touching the engine deck, adjust the blade safety switch (if needed) until the bellcrank depresses the plunger by 1/4".

c)Be sure the bellcrank does not contact the switch body to prevent damage to the switch.

d)Retighten switch mounting hardware.

5.2.13Handle height adjustment. See Section 3.8.

IMPORTANT: When the handle height adjustment is changed, it will be necessary to readjust the wheel drive and brake linkage (See Sections 3.8.5 and 3.8.6).

5.2.14Wheel drive spring tension adjustment.

It may be necessary to increase wheel drive belt tension under certain operating conditions such as, wet grass, hilly terrain, or while pulling a sulky.

a)Stop engine and remove spark plug wire(s).

b)Disengage neutral lock/park brake latches and release drive levers to lower spring force.

c)Remove the 5/16-18 whizlock nut securing the adjustment bolt to the drive wheel shield. Locate bolt assembly in the desired position as follows:

Position A - Normal Conditions

Position B - More Severe

Position C - Most Severe

NOTE: Lever force is lowest with bolt assembly in Position A and will increase in Positions B and C (See Figure 19).

FIG. 19

DRIVE BELT TENSION

ADJUSTMENT POSITIONS

5.2.15Adjust throttle lever tension (B&S Engines only). a)Stop engine.

b)Tension in throttle levers can be increased or decreased by adjusting the tightness of the lever pivot bolt which is located under the console.

- 31 -

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Page R N in G Exmark Parts PLUS Program Operators Manual Table of Contents Safety Your Safety is InvolvedSafety Alert Symbol TrainingOperation Give complete, undivided attention to the job at handPage Maintenance and Storage Safety SignsRiding Attachments KAWASAKI,KOHLER & 10.5 HP B&S Specifications Model NumberEngine Fuel SystemSafety Interlock System STEERING/BRAKE ControlTransmission Wheel Drive SystemAssembly Instructions DimensionsTorque Requirements Do not over tighten Upper Handle MountingUpper Handle Height Adjustment Kohler Speed Control Throttle Cable HOOK-UPKawasaki Speed Control Throttle Cable HOOK-UP 10.5 hp Speed Control Throttle Cable HOOK-UPFor B&S 8.5 hp Engines Nyloc nut See . Torque the 3/8 nut to 35 ft. lbs N⋅mLever and ROD Adjustment This Clearance should be Equal Shifter Lever To TransmissionNeutral Lock Lever Clearance Drive Lever Hardware LocationOperation Instructions ControlsFor locations and grease amounts Drive LEVER, Neutral LOCK/PARK Brake Latch Operation Kawasaki,Kohler, and B&S 10.5 hp EnginesPRE-START 8.5 hp EnginesOperating Instructions Blade Engagement Maintenance and Adjustments Periodic MaintenanceTransporting Blade Bolt Installation Service Interval DailyCheck Brake and Wheel Drive Linkage Adjustment Service Interval 40 hrs Service Interval 160 hrsLubrication Chart Service Interval Refer to ChartFitting Initial Fitting Quantity Service Locations IntervalSpray Lubricant Chart Service IntervalPivot Points Adjustments Caster Height Adjustment Axle Height Adjustment Axle NO. of Spacers Number of 1/4 Blade Spacers Below SpindleCutter Deck Belt Adjustment Underneath engine deck Belt Guide LocationWheel drive spring tension adjustment Drive Belt Tension Adjustment PositionsTrouble Shooting Blades do not Stop When DisengagedMower Pulling Left or Right Mower Cuts UnevenlyEngine Troubleshooting Engine Troubleshooting TableMower Deck Belt Routing 36 Mower DeckWiring Diagrams Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care
Related manuals
Manual 44 pages 58.72 Kb

Lazer Z specifications

The Exmark Lazer Z is a premium zero-turn mower known for its exceptional performance, durability, and advanced features, making it a top choice for both homeowners and professional landscapers. With its innovative engineering and attention to detail, the Lazer Z series has earned a strong reputation in the lawn care industry.

One of the primary features of the Exmark Lazer Z is its powerful engine options. Customers can choose from a variety of engines, including reliable Kohler and Kawasaki models, ensuring that every user can find the perfect fit for their mowing needs. These engines offer impressive horsepower, enabling the Lazer Z to handle even the toughest mowing conditions with ease.

The Lazer Z's cutting deck is another standout feature. Available in several sizes, typically ranging from 48 to 72 inches, the Aerodynamic design of the UltraCut cutting deck allows for efficient grass flow, providing a clean and even cut. The deck is made from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the deck height can be easily adjusted, giving users the flexibility to achieve their desired grass length.

The patented Red Technology is integrated into the Lazer Z, providing advanced features like the Smart Control, which optimizes performance in real time. This technology enhances fuel efficiency and reduces overall operating costs, making it an eco-friendly choice in a competitive market. Alongside this, the Lazer Z is designed with a responsive and intuitive control system that allows for precise maneuvering, making it easier to navigate tight spaces and complex landscapes.

Comfort is also at the forefront of the Lazer Z's design. Its ergonomically designed seat, equipped with high back support and adjustable armrests, ensures that operators remain comfortable during long mowing sessions. The Lap Bar control system offers smooth and effortless steering, enhancing user experience and reducing fatigue.

In terms of maintenance, the Exmark Lazer Z is designed to facilitate easy access to critical components. This allows for quick maintenance and service, ensuring that the mower remains in peak condition over its lifespan. Additionally, with a durable frame and robust construction, the Lazer Z is built to withstand the rigors of daily use.

Overall, the Exmark Lazer Z combines power, precision, and comfort, making it a preferred choice for anyone looking to achieve professional-quality results on their lawn. Whether for residential or commercial use, the Lazer Z delivers unmatched performance to meet a variety of mowing needs.
Top Page Image Contents