Exmark Lazer Z manual Underneath engine deck, Belt Guide Location

Page 35

5.2.6Secondary belt (48" only).

a)Stop engine and remove spark plug wire(s).

b)The secondary drive belt is adjusted via the belt tension rod (See Figure 16). The 5/16" nyloc adjustment nut is located at the rear, right corner of engine deck.

c)Proper belt tension (for the secondary belt) will require about 10 lbs. side pull on belt, halfway between pulleys (See Figure 16, Point B) to deflect belt 1/2”.

5.2.7Belt Guide Adjustment

a)Stop engine and remove spark plug wire(s).

b)Engage the blade drive belt.

c)Check belt guide clearance on the mower deck. The four welded belt guides on the mower deck should be located 1/8" from belt. Adjust if necessary.

d)Check belt guides under the engine deck for proper adjustment (See Figures 17 and 18). Adjust as necessary.

The disengaged belt should not drag or fall off pulley when guides are properly adjusted.

NOTE: Belt guides are not installed on the same bolts on the 32" and 36" models as on the 48" models.

NOTE: These drawings are viewed from

underneath engine deck.

FIG. 17

FIG. 18

BELT GUIDE LOCATION

BELT GUIDE LOCATION

32" & 36"

48"

5.2.8Brake adjustment - See 3.8.6.

5.2.9Wheel drive linkage adjustment - See 3.8.5.

5.2.10Shifter lever adjustment - See 3.8.4.

5.2.11Shifter detent adjustment - Transmission shifter detent can be adjusted by adjusting the setscrew on the back side of transmission located just behind the neutral start switch. Turn setscrew in (clockwise) to hold the transmission shifter more positively in each gear and to increase the force on the lever required to shift gears.

Turn setscrew out (counterclockwise) to decrease force on lever required to shift gears. Factory setting is to

- 30 -

Image 35
Contents Page R N in G Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolGive complete, undivided attention to the job at hand OperationPage Riding Attachments Maintenance and StorageSafety Signs KAWASAKI,KOHLER & 10.5 HP B&S Fuel System SpecificationsModel Number EngineWheel Drive System Safety Interlock SystemSTEERING/BRAKE Control TransmissionTorque Requirements Assembly InstructionsDimensions Upper Handle Mounting Do not over tightenKohler Speed Control Throttle Cable HOOK-UP Upper Handle Height Adjustment10.5 hp Speed Control Throttle Cable HOOK-UP Kawasaki Speed Control Throttle Cable HOOK-UPNyloc nut See . Torque the 3/8 nut to 35 ft. lbs N⋅m For B&S 8.5 hp EnginesThis Clearance should be Equal Shifter Lever To Transmission Lever and ROD AdjustmentDrive Lever Hardware Location Neutral Lock Lever ClearanceFor locations and grease amounts Operation InstructionsControls Kawasaki,Kohler, and B&S 10.5 hp Engines Drive LEVER, Neutral LOCK/PARK Brake Latch Operation8.5 hp Engines PRE-STARTOperating Instructions Blade Engagement Transporting Maintenance and AdjustmentsPeriodic Maintenance Service Interval Daily Blade Bolt InstallationCheck Brake and Wheel Drive Linkage Adjustment Service Interval 160 hrs Service Interval 40 hrsInterval Lubrication ChartService Interval Refer to Chart Fitting Initial Fitting Quantity Service LocationsPivot Points Spray Lubricant ChartService Interval Adjustments Caster Height Adjustment Axle Height Adjustment Below Spindle Axle NO. of Spacers Number of 1/4 Blade SpacersCutter Deck Belt Adjustment Belt Guide Location Underneath engine deckDrive Belt Tension Adjustment Positions Wheel drive spring tension adjustmentMower Cuts Unevenly Trouble ShootingBlades do not Stop When Disengaged Mower Pulling Left or Right36 Mower Deck Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagrams Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care
Related manuals
Manual 44 pages 58.72 Kb

Lazer Z specifications

The Exmark Lazer Z is a premium zero-turn mower known for its exceptional performance, durability, and advanced features, making it a top choice for both homeowners and professional landscapers. With its innovative engineering and attention to detail, the Lazer Z series has earned a strong reputation in the lawn care industry.

One of the primary features of the Exmark Lazer Z is its powerful engine options. Customers can choose from a variety of engines, including reliable Kohler and Kawasaki models, ensuring that every user can find the perfect fit for their mowing needs. These engines offer impressive horsepower, enabling the Lazer Z to handle even the toughest mowing conditions with ease.

The Lazer Z's cutting deck is another standout feature. Available in several sizes, typically ranging from 48 to 72 inches, the Aerodynamic design of the UltraCut cutting deck allows for efficient grass flow, providing a clean and even cut. The deck is made from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the deck height can be easily adjusted, giving users the flexibility to achieve their desired grass length.

The patented Red Technology is integrated into the Lazer Z, providing advanced features like the Smart Control, which optimizes performance in real time. This technology enhances fuel efficiency and reduces overall operating costs, making it an eco-friendly choice in a competitive market. Alongside this, the Lazer Z is designed with a responsive and intuitive control system that allows for precise maneuvering, making it easier to navigate tight spaces and complex landscapes.

Comfort is also at the forefront of the Lazer Z's design. Its ergonomically designed seat, equipped with high back support and adjustable armrests, ensures that operators remain comfortable during long mowing sessions. The Lap Bar control system offers smooth and effortless steering, enhancing user experience and reducing fatigue.

In terms of maintenance, the Exmark Lazer Z is designed to facilitate easy access to critical components. This allows for quick maintenance and service, ensuring that the mower remains in peak condition over its lifespan. Additionally, with a durable frame and robust construction, the Lazer Z is built to withstand the rigors of daily use.

Overall, the Exmark Lazer Z combines power, precision, and comfort, making it a preferred choice for anyone looking to achieve professional-quality results on their lawn. Whether for residential or commercial use, the Lazer Z delivers unmatched performance to meet a variety of mowing needs.