Exmark Lazer Z manual Check Brake and Wheel Drive Linkage Adjustment

Page 27

either the mower blades are engaged, or the transmission shifter lever is not in neutral and the operator removes both hands from the handles, the mower engine must stop.

b)To determine if the OPC is in operating condition, clear area of bystanders. Run the engine at one-third throttle, then with the drive levers and neutral lock latches in the “park brake” position, shift the transmission into gear and release the OPC levers - the engine MUST stop.

Again, run the engine at one-third throttle, move the transmission shifter lever to neutral, engage the blade clutch and release the OPC levers - the engine MUST stop.

If the mower engine does not stop under any of the

above mentioned conditions, DO NOT OPERATE. Contact your authorized Exmark service dealer.

It is essential that all Operator Safety Mechanisms, be in place and in proper operating condition prior to mowing.

5.1.5Check Brake and Wheel Drive Linkage Adjustment.

Service Interval: Daily

Refer to Sections 3.8.5 and 3.8.6. Note any bent linkage or hardware which may need servicing or replacing.

5.1.6Check for loose hardware.

Service Interval: Daily

a)Stop engine and remove spark plug wire(s).

b)Visually inspect machine for any loose hardware or any other possible problem. Tighten or replace any hardware before operating.

5.1.7Service pre-cleaner element and air cleaner.

Service Interval: See Engine Owners Manual

a)Stop engine and remove spark plug wire(s).

b)See engine owners manual for cleaning instructions.

5.1.8Change engine oil.

Service Interval: See Engine Owner's Manual

NOTE: Change oil after first five (5) hrs. of operation. Follow engine manufacturer's recommendations for future oil changes.

a)Disengage blades.

b)Stop engine and remove spark plug wires(s).

c)Drain oil while engine is warm from operation or if oil is to be changed after the unit has been sitting for awhile, run engine for a few minutes to get it warm.

Do Not service or make repairs near the engine area when the engine is hot.

d)Remove the oil drain plug from the right hand side of the engine. Allow oil to drain, replace drain plug.

e)Replace the oil filter per the engine owners manual (Kohler and Kawasaki only, there is no filter on B&S

- 22 -

Image 27
Contents Page R N in G Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolGive complete, undivided attention to the job at hand OperationPage Maintenance and Storage Safety SignsRiding Attachments KAWASAKI,KOHLER & 10.5 HP B&S Fuel System SpecificationsModel Number EngineWheel Drive System Safety Interlock SystemSTEERING/BRAKE Control TransmissionAssembly Instructions DimensionsTorque Requirements Upper Handle Mounting Do not over tightenKohler Speed Control Throttle Cable HOOK-UP Upper Handle Height Adjustment10.5 hp Speed Control Throttle Cable HOOK-UP Kawasaki Speed Control Throttle Cable HOOK-UPNyloc nut See . Torque the 3/8 nut to 35 ft. lbs N⋅m For B&S 8.5 hp EnginesThis Clearance should be Equal Shifter Lever To Transmission Lever and ROD AdjustmentDrive Lever Hardware Location Neutral Lock Lever ClearanceOperation Instructions ControlsFor locations and grease amounts Kawasaki,Kohler, and B&S 10.5 hp Engines Drive LEVER, Neutral LOCK/PARK Brake Latch Operation8.5 hp Engines PRE-STARTOperating Instructions Blade Engagement Maintenance and Adjustments Periodic MaintenanceTransporting Service Interval Daily Blade Bolt InstallationCheck Brake and Wheel Drive Linkage Adjustment Service Interval 160 hrs Service Interval 40 hrsInterval Lubrication ChartService Interval Refer to Chart Fitting Initial Fitting Quantity Service LocationsSpray Lubricant Chart Service IntervalPivot Points Adjustments Caster Height Adjustment Axle Height Adjustment Below Spindle Axle NO. of Spacers Number of 1/4 Blade SpacersCutter Deck Belt Adjustment Belt Guide Location Underneath engine deckDrive Belt Tension Adjustment Positions Wheel drive spring tension adjustmentMower Cuts Unevenly Trouble ShootingBlades do not Stop When Disengaged Mower Pulling Left or Right36 Mower Deck Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagrams Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care
Related manuals
Manual 44 pages 58.72 Kb

Lazer Z specifications

The Exmark Lazer Z is a premium zero-turn mower known for its exceptional performance, durability, and advanced features, making it a top choice for both homeowners and professional landscapers. With its innovative engineering and attention to detail, the Lazer Z series has earned a strong reputation in the lawn care industry.

One of the primary features of the Exmark Lazer Z is its powerful engine options. Customers can choose from a variety of engines, including reliable Kohler and Kawasaki models, ensuring that every user can find the perfect fit for their mowing needs. These engines offer impressive horsepower, enabling the Lazer Z to handle even the toughest mowing conditions with ease.

The Lazer Z's cutting deck is another standout feature. Available in several sizes, typically ranging from 48 to 72 inches, the Aerodynamic design of the UltraCut cutting deck allows for efficient grass flow, providing a clean and even cut. The deck is made from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the deck height can be easily adjusted, giving users the flexibility to achieve their desired grass length.

The patented Red Technology is integrated into the Lazer Z, providing advanced features like the Smart Control, which optimizes performance in real time. This technology enhances fuel efficiency and reduces overall operating costs, making it an eco-friendly choice in a competitive market. Alongside this, the Lazer Z is designed with a responsive and intuitive control system that allows for precise maneuvering, making it easier to navigate tight spaces and complex landscapes.

Comfort is also at the forefront of the Lazer Z's design. Its ergonomically designed seat, equipped with high back support and adjustable armrests, ensures that operators remain comfortable during long mowing sessions. The Lap Bar control system offers smooth and effortless steering, enhancing user experience and reducing fatigue.

In terms of maintenance, the Exmark Lazer Z is designed to facilitate easy access to critical components. This allows for quick maintenance and service, ensuring that the mower remains in peak condition over its lifespan. Additionally, with a durable frame and robust construction, the Lazer Z is built to withstand the rigors of daily use.

Overall, the Exmark Lazer Z combines power, precision, and comfort, making it a preferred choice for anyone looking to achieve professional-quality results on their lawn. Whether for residential or commercial use, the Lazer Z delivers unmatched performance to meet a variety of mowing needs.