Exmark Lazer Z manual Operation, Give complete, undivided attention to the job at hand

Page 7

•Fuel is Highly Flammable. DO NOT smoke while refueling. Refuel only in a well ventilated area, or refuel outdoors.

•Store fuel in containers specifically designed for this purpose.

•Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot.

•Never fill the fuel tank so that the fuel level rises above a level that is 1/2” below the bottom of the filler neck to allow for fuel expansion and prevent fuel spillage.

•If fuel is spilled, DO NOT attempt to start the engine. Move away from the area of the spill and avoid creating any source of ignition until fuel vapors have dissipated.

1.4OPERATION

1.4.1Give complete, undivided attention to the job at hand.

1.4.2Mow only in daylight or in good artificial light. DO NOT operate the mower when children or others are in the area.

1.4.3When feasible, avoid operating the equipment in wet grass.

1.4.4Use EXTREME caution when mowing and/or turning on slopes as loss of traction and/or control could occur. Mow across slopes with walk behind mowers, never up and down. Loss of control and/or loss of operator’s footing could result in a fall with an arm or leg getting under the mower or engine deck and sustaining serious injury. Drive slower on slopes. DO NOT operate on slopes greater than 20 degrees. Watch for ditches, holes, rocks, dips, and rises which can cause erratic handlebar movement and loss of footing. Keep away from drop- offs and steep banks. Avoid sudden starts. Look down and behind you before and while moving backwards. DO NOT mow slopes when grass is wet - slippery conditions create hazardous footing, affect steering, and reduce traction and braking. The operator is responsible for safe operation on slopes. See inside back cover to determine the approximate slope angle of the area to be mowed.

1.4.5Stop the blades when crossing surfaces other than grass, if mower must be tilted for transportation, and when transporting the mower to and from the area to be mowed.

1.4.6Never operate the mower with defective guards, shields, or covers. Always have safety shields, guards, switches, and other devices in place and in proper working condition.

1.4.7Do Not change the engine governor settings or overspeed the engine. Operating an engine at excessive speed may increase the hazard of personal injury.

1.4.8Place transmission in neutral, disengage blades, and latch drive levers in “park brake” position before starting engine.

- 2 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page R N in G Exmark Parts PLUS Program Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolGive complete, undivided attention to the job at hand OperationPage Safety Signs Maintenance and StorageRiding Attachments KAWASAKI,KOHLER & 10.5 HP B&S Fuel System SpecificationsModel Number EngineWheel Drive System Safety Interlock SystemSTEERING/BRAKE Control TransmissionDimensions Assembly InstructionsTorque Requirements Upper Handle Mounting Do not over tightenKohler Speed Control Throttle Cable HOOK-UP Upper Handle Height Adjustment10.5 hp Speed Control Throttle Cable HOOK-UP Kawasaki Speed Control Throttle Cable HOOK-UPNyloc nut See . Torque the 3/8 nut to 35 ft. lbs N⋅m For B&S 8.5 hp EnginesThis Clearance should be Equal Shifter Lever To Transmission Lever and ROD AdjustmentDrive Lever Hardware Location Neutral Lock Lever ClearanceControls Operation InstructionsFor locations and grease amounts Kawasaki,Kohler, and B&S 10.5 hp Engines Drive LEVER, Neutral LOCK/PARK Brake Latch Operation8.5 hp Engines PRE-STARTOperating Instructions Blade Engagement Periodic Maintenance Maintenance and AdjustmentsTransporting Service Interval Daily Blade Bolt InstallationCheck Brake and Wheel Drive Linkage Adjustment Service Interval 160 hrs Service Interval 40 hrsInterval Lubrication ChartService Interval Refer to Chart Fitting Initial Fitting Quantity Service LocationsService Interval Spray Lubricant ChartPivot Points Adjustments Caster Height Adjustment Axle Height Adjustment Below Spindle Axle NO. of Spacers Number of 1/4 Blade SpacersCutter Deck Belt Adjustment Belt Guide Location Underneath engine deckDrive Belt Tension Adjustment Positions Wheel drive spring tension adjustmentMower Cuts Unevenly Trouble ShootingBlades do not Stop When Disengaged Mower Pulling Left or Right36 Mower Deck Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagrams Warranty Page Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care
Related manuals
Manual 44 pages 58.72 Kb

Lazer Z specifications

The Exmark Lazer Z is a premium zero-turn mower known for its exceptional performance, durability, and advanced features, making it a top choice for both homeowners and professional landscapers. With its innovative engineering and attention to detail, the Lazer Z series has earned a strong reputation in the lawn care industry.

One of the primary features of the Exmark Lazer Z is its powerful engine options. Customers can choose from a variety of engines, including reliable Kohler and Kawasaki models, ensuring that every user can find the perfect fit for their mowing needs. These engines offer impressive horsepower, enabling the Lazer Z to handle even the toughest mowing conditions with ease.

The Lazer Z's cutting deck is another standout feature. Available in several sizes, typically ranging from 48 to 72 inches, the Aerodynamic design of the UltraCut cutting deck allows for efficient grass flow, providing a clean and even cut. The deck is made from durable materials, ensuring longevity and resistance to wear and tear. Furthermore, the deck height can be easily adjusted, giving users the flexibility to achieve their desired grass length.

The patented Red Technology is integrated into the Lazer Z, providing advanced features like the Smart Control, which optimizes performance in real time. This technology enhances fuel efficiency and reduces overall operating costs, making it an eco-friendly choice in a competitive market. Alongside this, the Lazer Z is designed with a responsive and intuitive control system that allows for precise maneuvering, making it easier to navigate tight spaces and complex landscapes.

Comfort is also at the forefront of the Lazer Z's design. Its ergonomically designed seat, equipped with high back support and adjustable armrests, ensures that operators remain comfortable during long mowing sessions. The Lap Bar control system offers smooth and effortless steering, enhancing user experience and reducing fatigue.

In terms of maintenance, the Exmark Lazer Z is designed to facilitate easy access to critical components. This allows for quick maintenance and service, ensuring that the mower remains in peak condition over its lifespan. Additionally, with a durable frame and robust construction, the Lazer Z is built to withstand the rigors of daily use.

Overall, the Exmark Lazer Z combines power, precision, and comfort, making it a preferred choice for anyone looking to achieve professional-quality results on their lawn. Whether for residential or commercial use, the Lazer Z delivers unmatched performance to meet a variety of mowing needs.
Top Page Image Contents