Exmark Lazer Z CT manual Hydrostatic Ground Drive System, Tires and Wheels, Cutting Deck

Page 18

2.6.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat track.

2.6.3Armrests: Standard seat: foam padded flip-up armrests.

Optional suspension seat: molded flip-up armrests.

2.6.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.7HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1Hydrostatic Pumps: Two Hydro Gear variable displacement piston pumps.

2.7.2Wheel Motors: Two Hydro Gear wheel drive motors with 1 1/4” tapered shafts.

2.7.3Hydraulic Oil: Use Mobil 1 15W-50 Synthetic Motor Oil.

2.7.4Hydraulic Oil Capacity: 2.1 qt. (2.0 L.)

2.7.5Hydraulic Filter: Replaceable cartridge type.

P/N 109-4180: 25 microns, 10 psi bypass (Summer use above 32° F (0°C))

P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F(0°C))

2.7.6Speeds: All units: 0 – 7.2 mph (11.6 km/hr) forward.

0 – 4.0 mph (6.4 km/hr) reverse.

2.7.7Drive wheel release valves allow machine to be moved when the engine is not running.

2.8TIRES AND WHEELS

2.8.1 Tires:

Size

Qty

Tread

Ply

Inflation

 

Drive Tires

20 x 10-8

2

“Turf Mate”

4

13 psi (90 kPa)

 

Front Caster Tires

11 x 4.00-5

2

Smooth

4

16 psi (110 kPa)

2.9 CUTTING DECK

2.9.1

Cutting Width:

48” deck

52” deck

60” deck

 

 

47.2 in.

52 in.

60 in.

 

 

(120.0 cm)

(132.1 cm)

(152.4 cm)

2.9.2 Discharge: Side (Optional Mulch or Bag)

 

2.9.3

Blade Size:

 

 

 

48” deck

52” deck

60” deck

 

(3 ea.)

16.25 in.

18.00 in.

20.50 in.

 

(41.3 cm)

(45.7 cm)

(52.1 cm)

 

 

2.9.4Blade Spindles: solid steel spindles with 1” (2.54 cm) I.D. bearings.

2.9.5Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven by one “B” Section belt (w/self-tensioning idler) direct from the engine.

2.9.6Deck: Full floating deck is attached to out-front support frame.

Maximum turf protection is provided anti-scalp rollers:

48” Decks: Qty 3

52” Decks: Qty 5

60” Decks: Qty 6

Deck design allows for bagging, mulching or side discharge.

2.9.7Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the cutting height from 1-1/2” (3.8 cm) to 4-1/2” (11.4 cm.) in 1/4” (.64 cm.) increments.

The cutting height adjustment handle has a transport position and all adjustments can be made while the operator remains seated. The foot operated deck lift assist lever to aids in raising the deck.

2.9.8Mulching Kit: Optional.

13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents For Serial Nos 670,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Potential Hazard There is no rollover protection when the roll bar is down Page Maintenance and Storage Safety Signs Page Page Specifications Hydrostatic Ground Drive System Tires and WheelsCutting Deck Torque Requirements DimensionsOperation Instructions ControlsPotential Hazard Push the lever forward and down to disengage the brake PRE-START MowingEngaging PTO Transporting Potential Hazard Maintenance & Adjustments Periodic MaintenanceService Interval Daily Service Interval Daily or more often in dry conditions Service Interval MonthlyService Interval Daily Check safety interlock system Service Interval 40 hr Lubrication Chart Service Interval 40 hrsService Interval Refer to chart Service Interval Once Yearly Service Interval 160 hrsService Interval 80 hrs Service Interval As RequiredService Interval After First 250 hrs Then yearly thereafter Service Interval After First 100 hrs Then 500 hrs thereafter Adjustments Page Self-tensioning No adjustment necessary No adjustment necessary Reverse Turn Bolt Indicator Here END Slot Page Trouble Shooting Waste DisposalEngine Troubleshooting Table ProblemBriggs & Stratton Electrical Diagram Hydraulic Diagram Year Limited Warranty Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories

Lazer Z CT specifications

The Exmark Lazer Z CT is a standout zero-turn mower designed for both residential and commercial landscaping professionals who demand efficiency, durability, and cutting precision. This powerful mower has redefined the standards for productivity in the turf care industry, making it a popular choice among operators who handle regular and extensive mowing tasks.

One of the main features of the Lazer Z CT is its robust cutting system, which is built to deliver an exceptional quality of cut. The mower is equipped with Exmark's patented Optimized Cutting System, which includes advanced engine and deck designs that work together to deliver superior performance. With deck options ranging from 48 to 60 inches, the Lazer Z CT caters to a variety of mowing needs, allowing operators to choose the right size for their landscape.

The Lazer Z CT is powered by a range of high-performance engines, including the reliable Kohler and Kawasaki offerings. These engines are engineered for maximum torque and power, ensuring that the mower can handle tough mowing conditions with ease. The advanced cooling systems also help to prolong engine life and reduce downtime, making this mower a dependable workhorse.

In terms of technology, the Lazer Z CT features a user-friendly control system that enhances maneuverability and comfort. The intuitive control levers allow for precise handling, especially in tight spaces and around obstacles. Additionally, the padded seat and ergonomic design ensure that operators can work for extended periods without discomfort.

Another notable characteristic of the Lazer Z CT is its exceptional build quality. Constructed with heavy-duty materials, the mower is engineered to withstand the rigors of daily use. Features such as the durable steel frame and commercial-grade transmission add to its longevity, making it a sound investment for lawn care professionals.

Furthermore, the mower's maintenance-friendly design simplifies routine upkeep tasks. Features like the accessible oil filter and easy-to-reach greasing points make it convenient for operators to perform regular maintenance, ensuring the mower remains in peak condition.

In conclusion, the Exmark Lazer Z CT combines power, precision, and comfort in a zero-turn mower that meets the demands of both residential and commercial applications. With its innovative technologies and robust features, it is an excellent choice for anyone looking to enhance their mowing efficiency and quality.
Top Page Image Contents