Exmark Lazer Z CT manual Service Interval 40 hr

Page 30

IMPORTANT: It is essential that operator safety mechanisms be connected and in proper operating condition prior to use for mowing.

4.1.7Check rollover protections systems (roll bar) pins

Service Interval: Daily

a)Make sure latch pin and hair pin are fully installed and lanyard is in good condition.

4.1.8Check seat belt

Service Interval: Daily

a)Visually inspect seat for wear, cuts, and proper operation of retractor and buckle. Replace before operating if damaged.

4.1.9Check for loose hardware.

Service Interval: Daily

a)Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

b)Visually inspect machine for any loose hardware or any other possible problem. Tighten hardware or correct the problem before operating.

4.1.10Service air cleaner.

Service Interval: See Engine Owner’s Manual

a)Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

b)See Engine Owner’s Manual for cleaning instructions.

4.1.11Change engine oil:

Service Interval: See Engine Owner’s Manual.

NOTE: Change oil and filter after first five (5) hrs. of operation. Follow engine manufacturer’s recommendations for future oil changes.

a)Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

b)Drain oil while engine is warm from operation.

c)Oil drain hose is located on left hand side of the engine.

Place pan under machine to catch oil. Remove oil drain plug. Allow oil to drain and replace oil drain plug. Torque plug to 20-24 ft-lbs.

d)Replace the oil filter as per the Engine Owner’s Manual. Clean around oil filter and unscrew filter to remove.

Before reinstalling new filter, apply a thin coating of oil on the surface of the rubber seal. Turn filter clockwise until rubber seal contacts the filter adapter then tighten filter an additional 2/3 to 3/4 turn.

e)Clean around oil fill cap and remove cap. Fill to specified capacity and replace cap. Use oil recommended in engine owner’s manual. DO NOT overfill.

f)Start the engine and check for leaks. Stop engine and recheck oil level.

4.1.12Check hydraulic oil level:

Service Interval: 40 hr.

a)Stop engine and wait for all moving parts to stop.

b)Clean area around hydraulic reservoir cap and remove cap.

c)Oil level should be to the top of the baffle inside the tank. If not add oil. Use only Mobil 1 15W-50 synthetic motor oil. Replace hydraulic reservoir cap and tighten until snug. Do not overtighten.

NOTE: The baffle is labeled “HOT” and “COLD”. The oil level varies with the temperature of the oil. The “HOT” level shows the level of oil when it is at

25

Page 29 Page 31
Image 30
Page 29 Page 31
Contents For Serial Nos 670,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Potential Hazard There is no rollover protection when the roll bar is down Page Maintenance and Storage Safety Signs Page Page Specifications Hydrostatic Ground Drive System Tires and WheelsCutting Deck Torque Requirements DimensionsOperation Instructions ControlsPotential Hazard Push the lever forward and down to disengage the brake PRE-START MowingEngaging PTO Transporting Potential Hazard Maintenance & Adjustments Periodic MaintenanceService Interval Daily Service Interval Daily or more often in dry conditions Service Interval MonthlyService Interval Daily Check safety interlock system Service Interval 40 hr Lubrication Chart Service Interval 40 hrsService Interval Refer to chart Service Interval Once Yearly Service Interval 160 hrsService Interval 80 hrs Service Interval As RequiredService Interval After First 250 hrs Then yearly thereafter Service Interval After First 100 hrs Then 500 hrs thereafter Adjustments Page Self-tensioning No adjustment necessary No adjustment necessary Reverse Turn Bolt Indicator Here END Slot Page Trouble Shooting Waste DisposalEngine Troubleshooting Table ProblemBriggs & Stratton Electrical Diagram Hydraulic Diagram Year Limited Warranty Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories

Lazer Z CT specifications

The Exmark Lazer Z CT is a standout zero-turn mower designed for both residential and commercial landscaping professionals who demand efficiency, durability, and cutting precision. This powerful mower has redefined the standards for productivity in the turf care industry, making it a popular choice among operators who handle regular and extensive mowing tasks.

One of the main features of the Lazer Z CT is its robust cutting system, which is built to deliver an exceptional quality of cut. The mower is equipped with Exmark's patented Optimized Cutting System, which includes advanced engine and deck designs that work together to deliver superior performance. With deck options ranging from 48 to 60 inches, the Lazer Z CT caters to a variety of mowing needs, allowing operators to choose the right size for their landscape.

The Lazer Z CT is powered by a range of high-performance engines, including the reliable Kohler and Kawasaki offerings. These engines are engineered for maximum torque and power, ensuring that the mower can handle tough mowing conditions with ease. The advanced cooling systems also help to prolong engine life and reduce downtime, making this mower a dependable workhorse.

In terms of technology, the Lazer Z CT features a user-friendly control system that enhances maneuverability and comfort. The intuitive control levers allow for precise handling, especially in tight spaces and around obstacles. Additionally, the padded seat and ergonomic design ensure that operators can work for extended periods without discomfort.

Another notable characteristic of the Lazer Z CT is its exceptional build quality. Constructed with heavy-duty materials, the mower is engineered to withstand the rigors of daily use. Features such as the durable steel frame and commercial-grade transmission add to its longevity, making it a sound investment for lawn care professionals.

Furthermore, the mower's maintenance-friendly design simplifies routine upkeep tasks. Features like the accessible oil filter and easy-to-reach greasing points make it convenient for operators to perform regular maintenance, ensuring the mower remains in peak condition.

In conclusion, the Exmark Lazer Z CT combines power, precision, and comfort in a zero-turn mower that meets the demands of both residential and commercial applications. With its innovative technologies and robust features, it is an excellent choice for anyone looking to enhance their mowing efficiency and quality.
Top Page Image Contents