Exmark Lazer Z CT manual Maintenance & Adjustments, Periodic Maintenance, Service Interval Daily

Page 26

4. MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

♦While maintenance or adjustments are being made, someone could start the engine.

WHAT CAN HAPPEN

♦Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

♦Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

♦The engine can become very hot.

WHAT CAN HAPPEN

♦Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

♦Allow the engine to cool completely before service or making repairs around the engine area.

4.1PERIODIC MAINTENANCE

4.1.1Check engine oil level:

Service Interval: Daily

a)Stop engine, wait for all moving parts to stop and make sure unit is on a level surface.

b)Check with engine cold.

c)Clean area around dipstick. Remove dipstick and wipe oil off. Reinsert the dipstick. Screw dipstick into place. Remove the dipstick and read the oil level.

d)If the oil level is low, wipe off the area around the oil fill cap, remove cap, and fill to the “FULL” mark on the dipstick. Use oil as specified in the Engine Owner’s Manual.

DO NOT overfill.

IMPORTANT: DO NOT operate the engine with the oil level below the “LOW” (or “ADD”) mark on the dipstick, or over the “FULL” mark.

21

Page 25 Page 27
Image 26
Page 25 Page 27
Contents For Serial Nos 670,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingCarbon monoxide can kill you Potential Hazard Operation Potential Hazard There is no rollover protection when the roll bar is down Page Maintenance and Storage Safety Signs Page Page Specifications Cutting Deck Hydrostatic Ground Drive SystemTires and Wheels Torque Requirements DimensionsOperation Instructions ControlsPotential Hazard Push the lever forward and down to disengage the brake PRE-START MowingEngaging PTO Transporting Potential Hazard Service Interval Daily Maintenance & AdjustmentsPeriodic Maintenance Service Interval Daily or more often in dry conditions Service Interval MonthlyService Interval Daily Check safety interlock system Service Interval 40 hr Service Interval Refer to chart Lubrication ChartService Interval 40 hrs Service Interval Once Yearly Service Interval 160 hrsService Interval After First 250 hrs Then yearly thereafter Service Interval 80 hrsService Interval As Required Service Interval After First 100 hrs Then 500 hrs thereafter Adjustments Page Self-tensioning No adjustment necessary No adjustment necessary Reverse Turn Bolt Indicator Here END Slot Page Trouble Shooting Waste DisposalEngine Troubleshooting Table ProblemBriggs & Stratton Electrical Diagram Hydraulic Diagram Year Limited Warranty Service Record Fold Along Appropriate Line See EXMARK’S Complete Line of Accessories

Lazer Z CT specifications

The Exmark Lazer Z CT is a standout zero-turn mower designed for both residential and commercial landscaping professionals who demand efficiency, durability, and cutting precision. This powerful mower has redefined the standards for productivity in the turf care industry, making it a popular choice among operators who handle regular and extensive mowing tasks.

One of the main features of the Lazer Z CT is its robust cutting system, which is built to deliver an exceptional quality of cut. The mower is equipped with Exmark's patented Optimized Cutting System, which includes advanced engine and deck designs that work together to deliver superior performance. With deck options ranging from 48 to 60 inches, the Lazer Z CT caters to a variety of mowing needs, allowing operators to choose the right size for their landscape.

The Lazer Z CT is powered by a range of high-performance engines, including the reliable Kohler and Kawasaki offerings. These engines are engineered for maximum torque and power, ensuring that the mower can handle tough mowing conditions with ease. The advanced cooling systems also help to prolong engine life and reduce downtime, making this mower a dependable workhorse.

In terms of technology, the Lazer Z CT features a user-friendly control system that enhances maneuverability and comfort. The intuitive control levers allow for precise handling, especially in tight spaces and around obstacles. Additionally, the padded seat and ergonomic design ensure that operators can work for extended periods without discomfort.

Another notable characteristic of the Lazer Z CT is its exceptional build quality. Constructed with heavy-duty materials, the mower is engineered to withstand the rigors of daily use. Features such as the durable steel frame and commercial-grade transmission add to its longevity, making it a sound investment for lawn care professionals.

Furthermore, the mower's maintenance-friendly design simplifies routine upkeep tasks. Features like the accessible oil filter and easy-to-reach greasing points make it convenient for operators to perform regular maintenance, ensuring the mower remains in peak condition.

In conclusion, the Exmark Lazer Z CT combines power, precision, and comfort in a zero-turn mower that meets the demands of both residential and commercial applications. With its innovative technologies and robust features, it is an excellent choice for anyone looking to enhance their mowing efficiency and quality.
Top Page Image Contents