Exmark Lawn Mower manual Recommended Gasoline

Page 18

Operation

See inside back cover to determine the approximate slope angle to be mowed.

Recommended Gasoline

Use UNLEADED Regular Gasoline suitable for automotive use (87 pump octane minimum).

Important: Never use methanol, gasoline containing methanol, or gasohol containing more than 10% ethanol because the fuel system could be damaged. Do Not mix oil with gasoline.

DANGER

In certain conditions gasoline is extremely flammable and vapors are explosive.

A fire or explosion from gasoline can burn you, others, and cause property damage.

Fill the fuel tank outdoors in an open area, when the engine is cold. Wipe up any gasoline that spills.

Never refill the fuel tank or drain the machine indoors or inside an enclosed trailer.

Do Not fill the fuel tank completely full. Add gasoline to the fuel tank until the body of the tank is full but fuel does not fill the neck of the tank. This empty space in the tank allows gasoline to expand.

Never smoke when handling gasoline, and stay away from an open flame or where gasoline fumes may be ignited by spark.

Store gasoline in an approved container and keep it out of the reach of children. Never buy more than a 30-day supply of gasoline.

Do Not operate without entire exhaust system in place and in proper working condition.

DANGER

In certain conditions during fueling, static electricity can be released causing a spark which can ignite gasoline vapors. A fire or explosion from gasoline can burn you and others and cause property damage.

Always place gasoline containers on the ground away from your vehicle before filling.

Do Not fill gasoline containers inside a vehicle or on a truck or trailer bed because interior carpets or plastic truck bed liners may insulate the container and slow the loss of any static charge.

When practical, remove gas-powered equipment from the truck or trailer and refuel the equipment with its wheels on the ground.

If this is not possible, then refuel such equipment on a truck or trailer from a portable container, rather than from a gasoline dispenser nozzle.

If a gasoline dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete.

WARNING

Gasoline is harmful or fatal if swallowed. Long-term exposure to vapors has caused cancer in laboratory animals. Failure to use caution may cause serious injury or illness.

Avoid prolonged breathing of vapors.

Keep face away from nozzle and gas tank/container opening.

Keep away from eyes and skin.

Never siphon by mouth.

18

Image 18
Contents Quest California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol General OperationChildren ServiceSlope Operation TowingExmark Riding Mower Safety General ServiceSafety and Instructional Decals 93-7009109-6035 109-9173 109-6016 Battery Symbols Specifications Model NumbersSystems Dimensions Torque Requirements Curb WeightProduct Overview Tread Width Center to Center of Tires, WidthwiseOperation ControlsParking Brake Lever Think Safety FirstOperating Instructions Height-of-Cut Foot LeverRecommended Gasoline Starting the Engine Using Stabilizer/ConditionerChecking the Engine Oil Level Gasoline/Alcohol blendsOperating the Blades Engaging the BladesTesting the Safety Interlock System Safety Interlock SystemUnderstanding the Safety Interlock System Stopping the EngineDriving Forward or Backward ForwardStopping the Machine Adjusting the Height of CutTracking Adjustment BackwardAdjusting the Anti-Scalp Rollers Positioning the SeatChanging the Seat Ride Suspension Adjusting the Height Adjusting the Motion Control LeversAdjusting the Tilt Pushing the Machine by HandTo Operate the Machine Side DischargeTransporting Transporting a UnitOperating Tips Blade Maintenance When StoppingKeep the Underside of the Mower Clean Cutting SpeedMaintenance Recommended Maintenance SchedulesLubrication Accessing the BatteryRaising the Seat Greasing the BearingsEngine Maintenance Servicing the Air CleanerChecking the Oil Level Servicing the Engine OilServicing Paper Element Changing the Oil and FilterOil drain Pan Oil drain plug Checking the Hydraulic Oil Level Change the Hydraulic System FilterServicing the Spark Plug Cleaning the Blower HousingInstalling the Spark Plug Removing the Spark PlugFuel System Maintenance Electrical System MaintenanceReplacing the Fuel Filter Charging the Battery Removing the BatteryCharging the Battery Installing the Battery Servicing the Fuses and RelayBefore Inspecting or Servicing the Blades Drive System Maintenance Checking the Tire PressureMower Maintenance Servicing the Cutting Blades Inspecting the BladesRemoving the Blades Sharpening the BladesInspecting the Belts Mower Belt MaintenanceInstalling the Blades Replacing the Mower BeltAdjusting the Blade Slope Leveling the Mower DeckBlades front to rear Measure here Outside cutting edges Installing the Mower Deck Removing the Mower DeckReplacing the Discharge Deflector Locate items shown in FigureCleaning Washing the Underside of the MowerCleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionTo Pushing the Machine by Hand Schematics Diagram-Briggs & StrattonElectrical Diagram-Kohler For units purchased on or after January 1 Page Service Record Date Description of Work Done Service Done By

Lawn Mower specifications

Exmark Lawn Mowers are renowned for their superior quality, innovative technology, and exceptional cutting performance, making them a top choice among professional landscapers and homeowners alike. With a rich history dating back to 1982, Exmark has built a reputation for delivering mowers that are not only durable but also efficient and user-friendly.

One of the standout features of Exmark mowers is their cutting system, which includes advanced mower decks designed for precision and efficiency. The premium cutting decks are engineered to provide unparalleled grass dispersal and a clean finish. The Exmark Vantage and Lazer Z series are particularly known for their Ultracut decks, which enhance the mowing experience with an optimal blade overlap that ensures a consistent cut.

Powering these machines are robust engines that vary across the different models, allowing users to choose the right power level for their specific needs. Exmark mowers often come equipped with Kawasaki or Kohler engines that maximize torque and effortlessly handle challenging terrains.

The technology integrated into Exmark mowers includes the innovative Red Technology. It features intelligent monitoring systems that provide real-time feedback on engine performance, ensuring optimal efficiency and reducing fuel consumption. This feature is invaluable for landscape professionals who prioritize both productivity and environmental responsibility.

Comfort and ease of use are also pivotal in Exmark's design philosophy. Many models are equipped with ergonomic controls and plush seats designed to reduce operator fatigue during long mowing sessions. For instance, the Lazer Z models boast adjustable suspension seats that provide comfort without compromising control or precision.

Furthermore, Exmark mowers offer exceptional maneuverability. The zero-turn capability allows users to navigate tight spaces and obstacles with remarkable ease. This feature is particularly beneficial for commercial landscapers who need to work efficiently in complex environments.

In terms of build quality, Exmark mowers are constructed with heavy-duty materials designed to withstand rigorous use. The durability of the chassis and components ensures a long lifespan, further enhancing the investment for both professional and residential users.

Overall, Exmark Lawn Mowers combine cutting-edge technology, superior build quality, and unparalleled performance to provide a mowing experience that stands above the competition. Whether for commercial landscaping or maintaining a pristine lawn at home, Exmark continues to deliver exceptional results and user satisfaction.