Exmark Lawn Mower manual Adjusting the Anti-Scalp Rollers, Positioning the Seat

Page 24

Operation

the predetermined cut height by slowly decreasing foot pressure allowing the foot lever to travel rearward.

Adjusting the Anti-Scalp Rollers

It is recommended to change the anti-scalp roller position when the height of cut has changed.

1.Stop the machine and move the drive levers to the neutral lock position.

2.Disengage the PTO.

3.Engage the park brake.

4.Stop the engine, remove the key and wait for all moving parts to stop.

5.After adjusting the height of cut, adjust the anti-scalp rollers by removing the nyloc nut.

6.Adjust the anti-scalp rollers for the normal operating conditions. Place rollers in one of the positions shown in Figure 15. Rollers will maintain 3/4 inches (19 mm) clearance to the ground to minimize gouging and roller wear or damage.

Note: For Maximum Deck Flotation, place the rollers one hole position lower. Rollers should maintain 1/4 inch (6.35 mm) clearance to the ground. Do Not adjust rollers to support the deck.

Positioning the Seat

The seat can move forward and backward. Position the seat where you have the best control of the machine and are most comfortable.

1.Push the adjustment lever towards the center of the machine to release the seat adjuster track (Figure 16).

Figure 16

1.Adjustment lever

2.Move the seat to the desired position and release the lever to lock in that position.

Changing the Seat Ride Suspension

The number of seat springs can be changed to maximize rider comfort. More springs should be used with heavier operators and on rough terrain. Fewer springs should be used with lighter operators and when mowing smooth, well established lawns. Always keep the number of springs on the left and right side the same when adding and removing springs.

Figure 15

For cutting heights above 3 1/2 inches (38 mm) use the bottom hole. The rollers will still be effective against scalping.

1. Anti-scalp roller

2. Cutting height

mounting bracket

 

7.Torque hardware to 27-33 ft-lb (37-45 N-m) or loss of roller may result.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Quest California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices General OperationService Slope OperationChildren TowingExmark Riding Mower Safety General ServiceSafety and Instructional Decals 93-7009109-6035 109-9173 109-6016 Battery Symbols Specifications Model NumbersSystems Dimensions Curb Weight Product OverviewTorque Requirements Tread Width Center to Center of Tires, WidthwiseOperation ControlsThink Safety First Operating InstructionsParking Brake Lever Height-of-Cut Foot LeverRecommended Gasoline Using Stabilizer/Conditioner Checking the Engine Oil LevelStarting the Engine Gasoline/Alcohol blendsOperating the Blades Engaging the BladesSafety Interlock System Understanding the Safety Interlock SystemTesting the Safety Interlock System Stopping the EngineDriving Forward or Backward ForwardAdjusting the Height of Cut Tracking AdjustmentStopping the Machine BackwardAdjusting the Anti-Scalp Rollers Positioning the SeatChanging the Seat Ride Suspension Adjusting the Motion Control Levers Adjusting the TiltAdjusting the Height Pushing the Machine by HandSide Discharge TransportingTo Operate the Machine Transporting a UnitOperating Tips When Stopping Keep the Underside of the Mower CleanBlade Maintenance Cutting SpeedMaintenance Recommended Maintenance SchedulesAccessing the Battery Raising the SeatLubrication Greasing the BearingsEngine Maintenance Servicing the Air CleanerServicing the Engine Oil Servicing Paper ElementChecking the Oil Level Changing the Oil and FilterOil drain Pan Oil drain plug Checking the Hydraulic Oil Level Change the Hydraulic System FilterCleaning the Blower Housing Installing the Spark PlugServicing the Spark Plug Removing the Spark PlugFuel System Maintenance Electrical System MaintenanceReplacing the Fuel Filter Charging the Battery Removing the BatteryCharging the Battery Installing the Battery Servicing the Fuses and RelayDrive System Maintenance Checking the Tire Pressure Mower Maintenance Servicing the Cutting BladesBefore Inspecting or Servicing the Blades Inspecting the BladesRemoving the Blades Sharpening the BladesMower Belt Maintenance Installing the BladesInspecting the Belts Replacing the Mower BeltAdjusting the Blade Slope Leveling the Mower DeckBlades front to rear Measure here Outside cutting edges Installing the Mower Deck Removing the Mower DeckReplacing the Discharge Deflector Locate items shown in FigureCleaning Washing the Underside of the MowerCleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionTo Pushing the Machine by Hand Schematics Diagram-Briggs & StrattonElectrical Diagram-Kohler For units purchased on or after January 1 Page Service Record Date Description of Work Done Service Done By

Lawn Mower specifications

Exmark Lawn Mowers are renowned for their superior quality, innovative technology, and exceptional cutting performance, making them a top choice among professional landscapers and homeowners alike. With a rich history dating back to 1982, Exmark has built a reputation for delivering mowers that are not only durable but also efficient and user-friendly.

One of the standout features of Exmark mowers is their cutting system, which includes advanced mower decks designed for precision and efficiency. The premium cutting decks are engineered to provide unparalleled grass dispersal and a clean finish. The Exmark Vantage and Lazer Z series are particularly known for their Ultracut decks, which enhance the mowing experience with an optimal blade overlap that ensures a consistent cut.

Powering these machines are robust engines that vary across the different models, allowing users to choose the right power level for their specific needs. Exmark mowers often come equipped with Kawasaki or Kohler engines that maximize torque and effortlessly handle challenging terrains.

The technology integrated into Exmark mowers includes the innovative Red Technology. It features intelligent monitoring systems that provide real-time feedback on engine performance, ensuring optimal efficiency and reducing fuel consumption. This feature is invaluable for landscape professionals who prioritize both productivity and environmental responsibility.

Comfort and ease of use are also pivotal in Exmark's design philosophy. Many models are equipped with ergonomic controls and plush seats designed to reduce operator fatigue during long mowing sessions. For instance, the Lazer Z models boast adjustable suspension seats that provide comfort without compromising control or precision.

Furthermore, Exmark mowers offer exceptional maneuverability. The zero-turn capability allows users to navigate tight spaces and obstacles with remarkable ease. This feature is particularly beneficial for commercial landscapers who need to work efficiently in complex environments.

In terms of build quality, Exmark mowers are constructed with heavy-duty materials designed to withstand rigorous use. The durability of the chassis and components ensures a long lifespan, further enhancing the investment for both professional and residential users.

Overall, Exmark Lawn Mowers combine cutting-edge technology, superior build quality, and unparalleled performance to provide a mowing experience that stands above the competition. Whether for commercial landscaping or maintaining a pristine lawn at home, Exmark continues to deliver exceptional results and user satisfaction.
Top Page Image Contents