Exmark Lawn Mower manual Safety Alert Symbol, Safe Operating Practices, General Operation

Page 5

Safety

Safety

Safety Alert Symbol

This manual identifies potential hazards and has safety messages identified by the safety alert symbol (Figure 2), which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions.

Figure 2

1.Safety alert symbol

This manual uses two other words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention.

This machine meets or exceeds the safety specifications of the American National Standards Institute B71.1-2003 in effect at the time of production. However, improper use or maintenance by the operator or owner can result in injury. To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety alert symbol, which means CAUTION, WARNING, or DANGER-"personal safety instruction." Failure to comply with the instruction may result in personal injury or death.

Safe Operating Practices

The following instructions are from ANSI standard B71.1-2003.

This product is capable of amputating hands and feet and throwing objects. Always follow all safety instructions to avoid serious injury or death.

General Operation

Read, understand, and follow all instructions in the operator’s manual and on the machine before starting.

Do Not place hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Allow only responsible adults who are familiar with the instructions to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop the machine if anyone enters the area.

Never carry passengers.

Do Not mow in reverse unless absolutely necessary. Always look down and behind before and while backing up.

Be aware of the mower discharge direction and Do Not point it at anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do Not operate the mower without either the entire grass collection system or the discharge deflector in place.

Be alert, slow down and use caution when making turns. Look behind and to the side before changing directions.

Never leave a running machine unattended. Always turn off blades, engage parking brake, stop engine, and remove key before dismounting.

Turn off blades when not mowing. Stop the engine, wait for all parts to come to a complete stop, engage parking brake, and remove key before cleaning the machine, removing the grass or unclogging the deflector.

Operate the machine only in daylight or good artificial light.

Do Not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck

Always wear eye protection when operating the mower.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower

5

Image 5
Contents Quest California Introduction Contents Safety Alert Symbol SafetySafe Operating Practices General OperationSlope Operation ServiceChildren TowingGeneral Service Exmark Riding Mower Safety93-7009 Safety and Instructional Decals109-6035 109-9173 109-6016 Battery Symbols Systems SpecificationsModel Numbers Dimensions Product Overview Curb WeightTorque Requirements Tread Width Center to Center of Tires, WidthwiseControls OperationOperating Instructions Think Safety FirstParking Brake Lever Height-of-Cut Foot LeverRecommended Gasoline Checking the Engine Oil Level Using Stabilizer/ConditionerStarting the Engine Gasoline/Alcohol blendsEngaging the Blades Operating the BladesUnderstanding the Safety Interlock System Safety Interlock SystemTesting the Safety Interlock System Stopping the EngineForward Driving Forward or BackwardTracking Adjustment Adjusting the Height of CutStopping the Machine BackwardChanging the Seat Ride Suspension Adjusting the Anti-Scalp RollersPositioning the Seat Adjusting the Tilt Adjusting the Motion Control LeversAdjusting the Height Pushing the Machine by HandTransporting Side DischargeTo Operate the Machine Transporting a UnitOperating Tips Keep the Underside of the Mower Clean When StoppingBlade Maintenance Cutting SpeedRecommended Maintenance Schedules MaintenanceRaising the Seat Accessing the BatteryLubrication Greasing the BearingsServicing the Air Cleaner Engine MaintenanceServicing Paper Element Servicing the Engine OilChecking the Oil Level Changing the Oil and FilterOil drain Pan Oil drain plug Change the Hydraulic System Filter Checking the Hydraulic Oil LevelInstalling the Spark Plug Cleaning the Blower HousingServicing the Spark Plug Removing the Spark PlugReplacing the Fuel Filter Fuel System MaintenanceElectrical System Maintenance Charging the Battery Charging the BatteryRemoving the Battery Servicing the Fuses and Relay Installing the BatteryMower Maintenance Servicing the Cutting Blades Drive System Maintenance Checking the Tire PressureBefore Inspecting or Servicing the Blades Inspecting the BladesSharpening the Blades Removing the BladesInstalling the Blades Mower Belt MaintenanceInspecting the Belts Replacing the Mower BeltLeveling the Mower Deck Adjusting the Blade SlopeBlades front to rear Measure here Outside cutting edges Removing the Mower Deck Installing the Mower DeckLocate items shown in Figure Replacing the Discharge DeflectorWashing the Underside of the Mower CleaningStorage Cleaning and StorageProblem Possible Cause Corrective Action TroubleshootingTo Pushing the Machine by Hand Diagram-Briggs & Stratton SchematicsElectrical Diagram-Kohler For units purchased on or after January 1 Page Date Description of Work Done Service Done By Service Record

Lawn Mower specifications

Exmark Lawn Mowers are renowned for their superior quality, innovative technology, and exceptional cutting performance, making them a top choice among professional landscapers and homeowners alike. With a rich history dating back to 1982, Exmark has built a reputation for delivering mowers that are not only durable but also efficient and user-friendly.

One of the standout features of Exmark mowers is their cutting system, which includes advanced mower decks designed for precision and efficiency. The premium cutting decks are engineered to provide unparalleled grass dispersal and a clean finish. The Exmark Vantage and Lazer Z series are particularly known for their Ultracut decks, which enhance the mowing experience with an optimal blade overlap that ensures a consistent cut.

Powering these machines are robust engines that vary across the different models, allowing users to choose the right power level for their specific needs. Exmark mowers often come equipped with Kawasaki or Kohler engines that maximize torque and effortlessly handle challenging terrains.

The technology integrated into Exmark mowers includes the innovative Red Technology. It features intelligent monitoring systems that provide real-time feedback on engine performance, ensuring optimal efficiency and reducing fuel consumption. This feature is invaluable for landscape professionals who prioritize both productivity and environmental responsibility.

Comfort and ease of use are also pivotal in Exmark's design philosophy. Many models are equipped with ergonomic controls and plush seats designed to reduce operator fatigue during long mowing sessions. For instance, the Lazer Z models boast adjustable suspension seats that provide comfort without compromising control or precision.

Furthermore, Exmark mowers offer exceptional maneuverability. The zero-turn capability allows users to navigate tight spaces and obstacles with remarkable ease. This feature is particularly beneficial for commercial landscapers who need to work efficiently in complex environments.

In terms of build quality, Exmark mowers are constructed with heavy-duty materials designed to withstand rigorous use. The durability of the chassis and components ensures a long lifespan, further enhancing the investment for both professional and residential users.

Overall, Exmark Lawn Mowers combine cutting-edge technology, superior build quality, and unparalleled performance to provide a mowing experience that stands above the competition. Whether for commercial landscaping or maintaining a pristine lawn at home, Exmark continues to deliver exceptional results and user satisfaction.