Exmark Lawn Mower manual Exmark Riding Mower Safety, General Service

Page 7

Safety

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Use only an approved container.

Never remove the gas cap or add fuel when the engine is running. Allow the engine to cool before refueling.

Never refuel the machine indoors.

Never store the machine or fuel container inside where there is an open flame, such as near a water heater or furnace.

Never fill containers inside a vehicle or on a truck or trailer with a plastic liner. Always place containers on the ground away from your vehicle before filling.

Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until the fueling is complete. Do Not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immediately.

Never overfill the fuel tank. Replace gas cap and tighten securely.

General Service:

Never run a machine inside a closed area.

Keep nuts and bolts tight, especially the blade attachment bolts. Keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep the machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and fuel soaked debris. Allow the machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make any adjustments or repairs with the engine running.

Grass collection system components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and

replace with manufacturers’ recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blades or wear gloves, and use extra caution when servicing them.

Check for proper brake operation frequently. Adjust and service as required.

Maintain or replace safety and instruction decals as necessary.

Use only genuine Exmark replacement parts to ensure that original standards are maintained.

Exmark Riding Mower Safety

The following list contains safety information specific to Exmark products or other safety information that you must know that is not included in the ANSI standards.

Engine exhaust contains carbon monoxide, which is an odorless, deadly poison that can kill you. Do Not run engine indoors or in an enclosed area.

Stop the engine, wait for all moving parts to stop, engage parking brake, disconnect spark plug wire(s) and remove key before performing any service, repairs, maintenance or adjustments.

Keep hands, feet, hair, and loose clothing away from attachment discharge area, underside of mower and any moving parts while engine is running.

Do Not touch equipment or attachment parts which may be hot from operation. Allow to cool before attempting to maintain, adjust or service.

Battery acid is poisonous and can cause burns. Avoid contact with skin, eyes, and clothing. Protect your face, eyes, and clothing when working with a battery.

Battery gases can explode. Keep cigarettes, sparks and flames away from battery.

Use only Exmark approved attachments. Warranty may be voided if used with unapproved attachments.

If loading the machine onto a trailer or truck, use a single, full-width ramp only. The ramp angle should not exceed 15 degrees.

Note: The left and right sides of the machine are determined while sitting in the seat in the normal operating position

7

Image 7
Contents Quest California Introduction Contents General Operation SafetySafety Alert Symbol Safe Operating PracticesTowing ServiceSlope Operation ChildrenGeneral Service Exmark Riding Mower Safety93-7009 Safety and Instructional Decals109-6035 109-9173 109-6016 Battery Symbols Model Numbers SpecificationsSystems Dimensions Tread Width Center to Center of Tires, Widthwise Curb WeightProduct Overview Torque RequirementsControls OperationHeight-of-Cut Foot Lever Think Safety FirstOperating Instructions Parking Brake LeverRecommended Gasoline Gasoline/Alcohol blends Using Stabilizer/ConditionerChecking the Engine Oil Level Starting the EngineEngaging the Blades Operating the BladesStopping the Engine Safety Interlock SystemUnderstanding the Safety Interlock System Testing the Safety Interlock SystemForward Driving Forward or BackwardBackward Adjusting the Height of CutTracking Adjustment Stopping the MachinePositioning the Seat Adjusting the Anti-Scalp RollersChanging the Seat Ride Suspension Pushing the Machine by Hand Adjusting the Motion Control LeversAdjusting the Tilt Adjusting the HeightTransporting a Unit Side DischargeTransporting To Operate the MachineOperating Tips Cutting Speed When StoppingKeep the Underside of the Mower Clean Blade MaintenanceRecommended Maintenance Schedules MaintenanceGreasing the Bearings Accessing the BatteryRaising the Seat LubricationServicing the Air Cleaner Engine MaintenanceChanging the Oil and Filter Servicing the Engine OilServicing Paper Element Checking the Oil LevelOil drain Pan Oil drain plug Change the Hydraulic System Filter Checking the Hydraulic Oil LevelRemoving the Spark Plug Cleaning the Blower HousingInstalling the Spark Plug Servicing the Spark PlugElectrical System Maintenance Fuel System MaintenanceReplacing the Fuel Filter Removing the Battery Charging the BatteryCharging the Battery Servicing the Fuses and Relay Installing the BatteryInspecting the Blades Drive System Maintenance Checking the Tire PressureMower Maintenance Servicing the Cutting Blades Before Inspecting or Servicing the BladesSharpening the Blades Removing the BladesReplacing the Mower Belt Mower Belt MaintenanceInstalling the Blades Inspecting the BeltsLeveling the Mower Deck Adjusting the Blade SlopeBlades front to rear Measure here Outside cutting edges Removing the Mower Deck Installing the Mower DeckLocate items shown in Figure Replacing the Discharge DeflectorWashing the Underside of the Mower CleaningStorage Cleaning and StorageProblem Possible Cause Corrective Action TroubleshootingTo Pushing the Machine by Hand Diagram-Briggs & Stratton SchematicsElectrical Diagram-Kohler For units purchased on or after January 1 Page Date Description of Work Done Service Done By Service Record

Lawn Mower specifications

Exmark Lawn Mowers are renowned for their superior quality, innovative technology, and exceptional cutting performance, making them a top choice among professional landscapers and homeowners alike. With a rich history dating back to 1982, Exmark has built a reputation for delivering mowers that are not only durable but also efficient and user-friendly.

One of the standout features of Exmark mowers is their cutting system, which includes advanced mower decks designed for precision and efficiency. The premium cutting decks are engineered to provide unparalleled grass dispersal and a clean finish. The Exmark Vantage and Lazer Z series are particularly known for their Ultracut decks, which enhance the mowing experience with an optimal blade overlap that ensures a consistent cut.

Powering these machines are robust engines that vary across the different models, allowing users to choose the right power level for their specific needs. Exmark mowers often come equipped with Kawasaki or Kohler engines that maximize torque and effortlessly handle challenging terrains.

The technology integrated into Exmark mowers includes the innovative Red Technology. It features intelligent monitoring systems that provide real-time feedback on engine performance, ensuring optimal efficiency and reducing fuel consumption. This feature is invaluable for landscape professionals who prioritize both productivity and environmental responsibility.

Comfort and ease of use are also pivotal in Exmark's design philosophy. Many models are equipped with ergonomic controls and plush seats designed to reduce operator fatigue during long mowing sessions. For instance, the Lazer Z models boast adjustable suspension seats that provide comfort without compromising control or precision.

Furthermore, Exmark mowers offer exceptional maneuverability. The zero-turn capability allows users to navigate tight spaces and obstacles with remarkable ease. This feature is particularly beneficial for commercial landscapers who need to work efficiently in complex environments.

In terms of build quality, Exmark mowers are constructed with heavy-duty materials designed to withstand rigorous use. The durability of the chassis and components ensures a long lifespan, further enhancing the investment for both professional and residential users.

Overall, Exmark Lawn Mowers combine cutting-edge technology, superior build quality, and unparalleled performance to provide a mowing experience that stands above the competition. Whether for commercial landscaping or maintaining a pristine lawn at home, Exmark continues to deliver exceptional results and user satisfaction.