Exmark TR23KC manual Hardware and Support PIN Location for Deck Support Frame

Page 19

3.8.2Remove mower deck support frame from mower deck by removing the two hairpins and spacers from the front deck support pins and remove the hairpins and spacers from the rear deck support pins.

3.8.3Lift up on support frame until it clears the support pins. Position support frame so the arms are on each side of the tractor engine deck and secure.

Secure using eight (8) 3/8-16 x 1 1/4” bolts, disc spring washers, and whizlock nuts.

NOTE: Place spring washer cone side against bolt head (cupped side away from head) and install to outside of support frame (as shown in Figure 2). Install with whizlock nuts to the inside of engine deck. Tighten until spring washers are flat.

FIGURE 2

HARDWARE AND SUPPORT PIN

LOCATION FOR DECK SUPPORT FRAME

3.8.4Position tractor, with mower deck support frame in place, over the mower deck. Align support frame above mower deck and position it so the support pins on the deck align with the mounting holes in the support frame. Lower support frame onto deck and Reinstall the two hairpins and spacers on the front support pins and the two hairpins and spacers onto the rear support pins (See Figure 1).

3.8.5After the mower deck support frame and the attached mower deck are in place, it is necessary to remove the two wooden blocks under the engine deck pivot stops.

CAUTION

POTENTIAL HAZARD

♦Removing the two blocks prior to installing the mower deck and support for counter balance will allow the engine deck to flip backwards.

WHAT CAN HAPPEN

♦If the engine flips backwards pinch points are created, which may cause injury.

HOW TO AVOID THE HAZARD

♦Keep hands clear from the engine deck when removing the blocks.

3.8.6Install mower deck stationary idler. Idler components are located in the Turf Ranger bolt bag.

-14 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For Turf Ranger Serial Nos ,000 & Higher FMD524 & FMD604 Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training SafetySafety Alert Symbol Your Safety is InvolvedCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing Page Maintenance and Storage Safety Signs Page Specifications Torque Requirements DimensionsTires Mower DeckService Battery Assembly InstructionsInstall Handle BAR Install SeatInstall Rear Steering Wheel Install Drive WheelsHardware and Support PIN Location for Deck Support Frame Idler Pulley KIT and Location ControlsPosition Discharge Chute Page Drive Wheel Release Lever Operation InstructionsPRE-START MowingTransporting Periodic Maintenance Maintenance & AdjustmentsService Interval Daily For Serial Nos ,000 539,999 Blade Bolt InstallationBlade Bolt Installation Page Page Fitting Locations Initial Service Pumps Places Lubrication ChartCaster Wheel Assembly Page Page Cutting Height Adjustment AdjustmentsANTI-SCALP Roller Installation Cutting Height Adjustment Potential Hazard Parking Brake Quadrant Adjustment Neutral Centering Device AdjustmentBrake Control Link and Spring Adjustment Parking Brake Neutral Lockout Adjustment Seat Switch Adjustment Motion Control Linkage AdjustmentElectric Clutch Adjustment Throttle Tension Armrest AdjustmentWaste Disposal Trouble ShootingEngine Troubleshooting Table Engine TroubleshootingProblem Wiring Diagrams Year Limited Warranty Exmark Turf Equipment Page Page Service Record Page See EXMARK’S Complete Line of Accessories

TR23KC specifications

The Exmark TR23KC is a stand-on mower that has gained attention in the landscaping industry for its superior performance and innovative features. Designed for both commercial and residential landscaping professionals, this model combines power, precision, and comfort in a versatile package that is ideal for a range of mowing applications.

One of the standout features of the TR23KC is its robust engine. Powered by a reliable Kawasaki engine, the mower delivers exceptional cutting performance, making it suitable for tackling tough grass and uneven terrain. The engine ensures optimal fuel efficiency while providing enough power to handle demanding mowing tasks. This reliability allows landscapers to complete jobs quickly without sacrificing quality.

The cutting deck is another remarkable feature of the TR23KC. With a cutting width of 48 inches, it allows for efficient mowing over large areas. The deck is fabricated from high-quality materials, offering durability and resistance to wear and tear. The mower has adjustable cutting heights, enabling users to achieve the desired grass length, which is particularly beneficial for maintaining varying lawn conditions throughout the seasons.

In terms of comfort, the Exmark TR23KC includes an ergonomic stand-on platform. This design not only provides ease of use but also enhances operator visibility, offering an unobstructed view of the cutting area. The platform is equipped with anti-vibration features, reducing fatigue during long working hours, while the intuitive controls facilitate ease of use.

One notable technology integrated into the TR23KC is Exmark's innovative wheel technology. The large drive wheels enhance maneuverability and traction, allowing the operator to navigate around obstacles with utmost precision. The zero-turn capability further enhances its agility, making it simple to turn around tight corners and narrow spaces without needing to reposition.

Safety is also prioritized in the design of the TR23KC. It features an automatic engine shut-off system that activates when the operator leaves the platform. This ensures that the mower remains safe to use and reduces the risk of accidents.

Overall, the Exmark TR23KC stand-on mower is an excellent choice for professionals seeking a machine that combines power, efficiency, and comfort. Its robust engine, durable cutting deck, ergonomic design, and advanced technologies make it a reliable option for tackling various mowing tasks, establishing it as a leader in the stand-on mower segment.
Top Page Image Contents