Exmark TR23KC manual Safe Zone for Mowing

Page 10

DANGER

POTENTIAL HAZARD

Mowing on wet grass or steep slopes can cause sliding and loss of control.

WHAT CAN HAPPEN

Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning.

HOW TO AVOID THE HAZARD

Mow up and down slopes.

Do not mow slopes when grass is wet.

Do not mow near drop-offs or near water.

Do not mow slopes greater than 15 degrees.

Reduce speed and use extreme caution on slopes.

Avoid sudden turns or rapid speed changes.

See inside the back cover to determine the approximate slope angle of the area to be mowed.

Use a walk behind mower and\or a hand trimmer near drop-offs, ditches, steep banks or water. This area can be dangerous, see Figure 1.

G0083

Figure 1

SAFE ZONE FOR MOWING

Progressively greater care is needed as the slope increases.

Always avoid sudden starts and turns.

Be aware that loss of traction may occur going downhill. Weight transfer to the front wheels may cause rear wheel to lift off ground cause loss of steering.

Watch for ditches, holes, rocks, dips, and rises that change the operating angle, as rough terrain could overturn the machine.

Remove or mark obstacles such as rocks, tree limbs, etc. from the mowing area. Tall grass can hide obstacles.

Use extreme care with grass catchers or attachments. These can change the stability of the machine and cause loss of control.

1.4.5Use EXTREME caution when backing up. LOOK BEHIND YOU!

1.4.6Stop the blades when crossing surfaces other than grass and when transporting the mower to and from the area to be mowed.

-5 -

Image 10
Contents For Turf Ranger Serial Nos ,000 & Higher FMD524 & FMD604 Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Your Safety is Involved SafetySafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing Page Maintenance and Storage Safety Signs Page Specifications Mower Deck DimensionsTires Torque RequirementsAssembly Instructions Service BatteryInstall Drive Wheels Install SeatInstall Rear Steering Wheel Install Handle BARHardware and Support PIN Location for Deck Support Frame Idler Pulley KIT and Location ControlsPosition Discharge Chute Page Mowing Operation InstructionsPRE-START Drive Wheel Release LeverTransporting Maintenance & Adjustments Periodic MaintenanceService Interval Daily Blade Bolt Installation For Serial Nos ,000 539,999Blade Bolt Installation Page Page Fitting Locations Initial Service Pumps Places Lubrication ChartCaster Wheel Assembly Page Page Adjustments Cutting Height AdjustmentANTI-SCALP Roller Installation Cutting Height Adjustment Potential Hazard Parking Brake Quadrant Adjustment Neutral Centering Device AdjustmentBrake Control Link and Spring Adjustment Parking Brake Neutral Lockout Adjustment Seat Switch Adjustment Motion Control Linkage AdjustmentElectric Clutch Adjustment Armrest Adjustment Throttle TensionTrouble Shooting Waste DisposalEngine Troubleshooting Table Engine TroubleshootingProblem Wiring Diagrams Year Limited Warranty Exmark Turf Equipment Page Page Service Record Page See EXMARK’S Complete Line of Accessories

TR23KC specifications

The Exmark TR23KC is a stand-on mower that has gained attention in the landscaping industry for its superior performance and innovative features. Designed for both commercial and residential landscaping professionals, this model combines power, precision, and comfort in a versatile package that is ideal for a range of mowing applications.

One of the standout features of the TR23KC is its robust engine. Powered by a reliable Kawasaki engine, the mower delivers exceptional cutting performance, making it suitable for tackling tough grass and uneven terrain. The engine ensures optimal fuel efficiency while providing enough power to handle demanding mowing tasks. This reliability allows landscapers to complete jobs quickly without sacrificing quality.

The cutting deck is another remarkable feature of the TR23KC. With a cutting width of 48 inches, it allows for efficient mowing over large areas. The deck is fabricated from high-quality materials, offering durability and resistance to wear and tear. The mower has adjustable cutting heights, enabling users to achieve the desired grass length, which is particularly beneficial for maintaining varying lawn conditions throughout the seasons.

In terms of comfort, the Exmark TR23KC includes an ergonomic stand-on platform. This design not only provides ease of use but also enhances operator visibility, offering an unobstructed view of the cutting area. The platform is equipped with anti-vibration features, reducing fatigue during long working hours, while the intuitive controls facilitate ease of use.

One notable technology integrated into the TR23KC is Exmark's innovative wheel technology. The large drive wheels enhance maneuverability and traction, allowing the operator to navigate around obstacles with utmost precision. The zero-turn capability further enhances its agility, making it simple to turn around tight corners and narrow spaces without needing to reposition.

Safety is also prioritized in the design of the TR23KC. It features an automatic engine shut-off system that activates when the operator leaves the platform. This ensures that the mower remains safe to use and reduces the risk of accidents.

Overall, the Exmark TR23KC stand-on mower is an excellent choice for professionals seeking a machine that combines power, efficiency, and comfort. Its robust engine, durable cutting deck, ergonomic design, and advanced technologies make it a reliable option for tackling various mowing tasks, establishing it as a leader in the stand-on mower segment.